Set the width slightly smaller than the size of your work-piece, compress the spring, slide your
PCB into place, and release the springs. Easy, fast, and repeatable.
While the design is simple, it doesn't limit you and is totally hackable. The nylon jaws that come
with the vise hold a PCB 5mm or so from the shaft, giving you clearance for most layouts. If you
need something a little taller, there are 3D printable designs on the site for taller jaws, jaws with
slots to keep cables out of the way, and even High Temperature PTFE Jaws.
Features
Hold your PCB flat -- give your arms a rest! Stickvise is not up in the air, it holds your circuit
board flat so you can solder with stability at table level.
Simple design -- No half baked features or gimmicks, Stickvise just holds a circuit board in
a simple, intuitive way.
Hackable -- have a special applicationD print custom jaw plates or choose from many more
tested mods to make Stickvise work for your application.
Comes with one set of standard nylon jaws.
TECHNICAL DETAILS
Holding Capacity
Outside Dimensions
Mounting Specifications
LEARN
Stickvise is designed with simple, high quality parts. The jaws are machined, bead blasted and
anodized aluminum. The jaw plates are made with insulating Nylon 6/6. All all other components
are metric standard sizes.
Product Dimensions: 200.0mm x 76.0mm x 25.0mm / 7.9" x 3.0" x 1.0"
Product Weight: 170.0g / 6.0oz