18 SMD SHIELDED POWER INDUCTORS SERIES SHS1208 SPECIFICATIONS FEATURES - 100% ferrite shielding, zero cross talk - Very high current handling capacity in a small size - Available in bulk or tape and reel Part Number L ( H ) Tol % DCR Rated max Current ( ) (DC) max ( mA ) SHS1208-1R0M SHS1208-1R2M SHS1208-2R4M SHS1208-3R5M SHS1208-4R7K SHS1208-6R1K SHS1208-7R6K 1.0 1.2 2.4 3.5 4.7 6.1 7.6 20 20 20 20 10 10 10 0.009 0.010 0.014 0.015 0.017 0.020 0.022 10000 9800 8000 7500 6800 6600 5900 SHS1208-100K SHS1208-120K SHS1208-150K SHS1208-180K SHS1208-220K SHS1208-270K SHS1208-330K SHS1208-390K SHS1208-470K 10 12 15 18 22 27 33 39 47 10 10 10 10 10 10 10 10 10 0.024 0.028 0.032 0.043 0.046 0.049 0.064 0.070 0.090 5400 4900 4500 3900 3600 3400 3000 2750 2500 ELECTRICAL SPECIFICATIONS - Inductance range - Test frequency - Test equipment - Rated current range - Tolerance - Rated current 1.0uH to 47uH* 1 KHz Quadtech 1750 LCR Meter 2.5 Amps to 10 Amps 10% or 20% depends on L value Obtained when Lo drops 10% typical PHYSICAL SPECIFICATIONS - Operating temp. - Construction - Shielding - Terminal - NOTE: - Packaging - Tape & reel spec. -40C to +125C Wound ferrite bobbin covered with ferrite sleeve Less than 2% coupling Flat tinned T-shape copper wire Straight terminal is available under part number with suffix S Bulk 100 pieces per bag T & R 500 pieces per reel Tape 24 mm embossed carrier tape Reel 330 mm paper or plastic reel DIMENSIONS IN MILLIMETERS DIMENSIONS OF STRAIGHT TERMINAL - Square side A - Height B - Terminal length C - Terminal width D - Space between terminals E - Terminal length C - Terminal width D - Space between terminals E 12.0 0.4 8.0 0.3 6.5 nominal 3.4 nominal 5.1 nominal 4.9 nominal 3.0 nominal 5.1 nominal SUGGESTED LAND PATTERN A = 5.0 mm B = 6.6 mm C = 3.6 mm * NOTE: Other inductance values are available on special order. Associated Components Technology / Phone 800-234-2645 / Fax 714-265-4810 / Website http://www.act1.com