Supertex inc. LP0701 P-Channel Enhancement-Mode Lateral MOSFET Features General Description These enhancement-mode (normally-off) transistors utilize a lateral MOS structure and Supertex's well-proven silicon-gate manufacturing process. This combination produces devices with the power handling capabilities of bipolar transistors and with the high input impedance and negative temperature coefficient inherent in MOS devices. Ultra-low threshold High input impedance Low input capacitance Fast switching speeds Low on-resistance Freedom from secondary breakdown Low input and output leakage Characteristic of all MOS structures, these devices are free from thermal runaway and thermally induced secondary breakdown. The low threshold voltage and low on-resistance characteristics are ideally suited for hand held, battery operated applications. Applications Logic level interfaces Solid state relays Battery operated systems Photo voltaic drives Analog switches General purpose line drivers Ordering Information Device Package Options 8-Lead SOIC (Narrow Body) TO-92 LP0701LG-G LP0701N3-G LP0701 BVDSS/BVDGS RDS(ON) VGS(TH) ID(ON) () (max) (V) -16.5 1.5 -1.0 -1.25 (V) (min) (A) -G indicates package is RoHS compliant (`Green') Pin Configurations D Absolute Maximum Ratings Value Drain-to-source voltage BVDSS Drain-to-gate voltage BVDGS Gate-to-source voltage 10V Soldering temperature* -55C to +150C +300C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. Continuous operation of the device at the absolute rating level may affect device reliability. All voltages are referenced to device ground. * Distance of 1.6mm from case for 10 seconds. D D DRAIN NC Parameter Operating and storage temperature D NC SOURCE G S 8-Lead SOIC (LG) TO-92 (N3) Product Marking YYWW P0701 LLLL YY = Year Sealed WW = Week Sealed L = Lot Number = "Green" Packaging Package may or may not include the following marks: Si or 8-Lead SOIC (LG) S i LP 0 7 0 1 YYWW YY = Year Sealed WW = Week Sealed = "Green" Packaging Package may or may not include the following marks: Si or TO-92 (N3) Supertex inc. 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com GATE LP0701 Thermal Characteristics ID ID Package (continuous) (mA) (pulsed) (A) 8-Lead SOIC -700 TO-92 -500 Power Dissipation ( C/W) IDR (mA) IDRM 83 104 -700 -1.25 125 170 -500 -1.25 jc @TC = 25OC (W) ( C/W) -1.25 1.5 -1.25 1.0 O O ja (A) Notes: ID (continuous) is limited by max rated Tj. Mounted on FR4 board, 25mm x 25mm x 1.57mm Electrical Characteristics (T = 25C unless otherwise specified) A Sym Parameter BVDSS VGS VGS(th) IGSS IDSS Min Typ Max Units Drain-to-source breakdown voltage -16.5 - - V VGS = 0V, ID = -1.0mA Gate threshold voltage -0.5 -0.7 -1.0 V VGS = VDS, ID = -1.0mA Change in VGS(th) with temperature - - -4.0 mV/OC VGS = VDS, ID = -1.0mA Gate body leakage - - -100 nA VGS = 10V, VDS = 0V - - -100 nA VDS = -15V, VGS = 0V - - -1.0 mA VDS = 0.8 Max Rating, VGS = 0V, TA = 125OC - -0.4 - -0.6 -1.0 - -1.25 -2.3 - - 2.0 4.0 - 1.7 2.0 - 1.3 1.5 - - 0.75 %/ C VGS = -5.0V, ID = -300mA 500 700 - mmho VGS = -15V, ID = -1.0A Zero gate voltage drain current ID(ON) On-state drain current Static drain-to-source on-state resistance RDS(ON) RDS(ON) Change in RDS(ON) with temperature GFS Forward transconductance CISS Input capacitance - 120 250 COSS Common source output capacitance - 100 125 CRSS Reverse transfer capacitance - 40 60 td(ON) Turn-on delay time - - 20 Rise time - - 20 Turn-off delay time - - 30 Fall time - - 30 Diode forward voltage drop - -1.2 -1.5 tr td(OFF) tf VSD Conditions VGS = VDS = -2.0V A VGS = VDS = -3.0V VGS = VDS = -5.0V VGS = -2.0V, ID = -50mA VGS = -3.0V, ID = -150mA VGS = -5.0V, ID = -300mA O pF VGS = 0V, VDS = -15V, f = 1.0MHz ns VDD = -15V, ID = -1.25A, RGEN = 25 V VGS = 0V, ISD = -500mA Notes: 1. All D.C. parameters 100% tested at 25OC unless otherwise stated. (Pulse test: 300s pulse, 2% duty cycle.) 2. All A.C. parameters sample tested. Switching Waveforms and Test Circuit 0V Pulse Generator 10% INPUT -10V td(ON) RGEN 90% t(OFF) t(ON) td(OFF) tr D.U.T. tf INPUT 0V 90% OUTPUT VDD 10% Supertex inc. Output RL 90% 10% VDD 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com 2 LP0701 Typical Performance Curves Output Characteristics -2.5 Saturation Characteristics -2.5 VGS = -5.0V VGS = -5.0V -2.0 -4V ID (amperes) ID (amperes) -2.0 -1.5 -3V -1.0 -2V -0.5 -4V -1.5 -3V -1.0 -2V -0.5 -1V 0 -4 -8 -12 VDS (volts) -16 Transconductance vs. Drain Current 1.0 VDS = -15V -1V 0 -1 TA = 25OC 0.6 TA = 125OC 0.4 -2 -3 -4 VDS (volts) -5 Power Dissipation vs. Case Temperature 2 TA = -55OC 0.8 GFS (seimens) 0 SO-8 PD (watts) 0 1 TO-92 0.2 0 -1.0 ID (amperes) 1.0 TO-92/SO-8 (pulsed) -1.0 TO-92 (DC) -0.1 -0.01 -0.1 SO-8 (DC) TC = 25OC -1.0 -10 VDS (volts) Supertex inc. 0 25 50 75 125 100 150 TC (OC) Maximum Rated Safe Operating Area -10 ID (amperes) 0 -2.0 Thermal Resistance (normalized) 0 -100 Thermal Response Characteristics 0.8 0.6 TO-92 TC = 25V PD = 1.0W 0.4 0.2 0 0.001 0.01 0.1 1.0 tp (seconds) 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com 3 10 LP0701 Typical Performance Curves (cont.) BVDSS Variation with Temperature On-Resistance vs. Drain Current 10 VGS = -2.0V 1.1 RDSS(ON) (ohms) BVDSS (normalized) 8 1.0 VGS = -3.0V VGS = -5.0V 6 4 2 0.9 0 50 100 0 150 -1 0 TJ ( C) O Transfer Characteristics -2 V(th) and RDS Variation with Temperature 1.4 VDS = -15V 1.2 TA = -55 C VGS(th) (normalized) ID (amperes) O TA = 25OC -1 TA = 125OC 0 -1 -2 -3 -4 1.2 0.8 1.0 RDS(ON) @ -5V, -300mA 0 50 VGS (volts) VDS = -10V CISS 100 VGS (volts) C (picofarads) -8 COSS CRSS 0 -5 -10 VDS (volts) Supertex inc. 0.6 150 100 Gate Drive Dynamic Characteristics -10 f = 1.0MHz 0 0.8 TJ (OC) Capacitance vs. Drain-to-Source Voltage 200 1.4 1.0 0.4 -50 -5 1.6 V(th) @ -1.0mA 0.6 0 -3 -2 ID (amperes) -20V -6 238pF -4 -2 -15 0 CISS = 115pF 0 1 2 3 QG (nanocoulombs) 4 5 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com 4 RDS(ON) (normalized) -50 LP0701 D 1 8 E E1 L2 Note 1 (Index Area D/2 x E1/2) L 1 L1 Top View Gauge Plane Seating Plane View B A View B Note 1 h h A A2 Seating Plane b e A1 A Side View View A-A Note: 1. This chamfer feature is optional. A Pin 1 identifier must be located in the index area indicated. The Pin 1 identifier can be: a molded mark/identifier; an embedded metal marker; or a printed indicator. Symbol Dimension (mm) A A1 A2 b MIN 1.35* 0.10 1.25 0.31 NOM - - - - MAX 1.75 0.25 1.65* 0.51 D E E1 4.80* 5.80* 3.80* 4.90 6.00 3.90 5.00* 6.20* 4.00* e 1.27 BSC h L 0.25 0.40 - - 0.50 1.27 L1 1.04 REF L2 0.25 BSC JEDEC Registration MS-012, Variation AA, Issue E, Sept. 2005. * This dimension is not specified in the JEDEC drawing. Drawings are not to scale. Supertex Doc. #: DSPD-8SOLGTG, Version I041309. Supertex inc. 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com 5 1 0 5O O - - 8 15O O LP0701 3-Lead TO-92 Package Outline (N3) D A Seating Plane 1 2 3 L b e1 e c Side View Front View E1 E 3 1 2 Bottom View Symbol Dimensions (inches) A b c D E E1 e e1 L MIN .170 .014 .014 .175 .125 .080 .095 .045 .500 NOM - - - - - - - - - MAX .210 .022 .022 .205 .165 .105 .105 .055 .610* JEDEC Registration TO-92. * This dimension is not specified in the JEDEC drawing. This dimension differs from the JEDEC drawing. Drawings not to scale. Supertex Doc.#: DSPD-3TO92N3, Version E041009. (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to http://www.supertex.com/packaging.html.) Supertex inc. does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives an adequate "product liability indemnification insurance agreement." Supertex inc. does not assume responsibility for use of devices described, and limits its liability to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications refer to the Supertex inc. (website: http//www.supertex.com) Supertex inc. (c)2010 Supertex inc. All rights reserved. Unauthorized use or reproduction is prohibited. Doc.# DSFP-LP0701 A052109 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com 6