QUAD D FLIP-FLOP WITH MASTER RESET The MC74AC/ACT175 is a high-speed quad D flip-flop. The device is useful for general flip-flop requirements where clock and clear inputs are common. The information on the D inputs is transferred to storage during the LOW-to-HIGH clock transition. The device has a Master Reset to simultaneously clear all flip-flops, when MR is low. The MC74AC/ACT175 consists of four edge-triggered D flip-flops with individual D inputs and Q and Q outputs. The Clock (CP) and Master Reset (MR) are common to all flip-flops. Each D input's state is transferred to the corresponding flip-flop's output following the LOW-to-HIGH Clock (CP) transition. A LOW input to the Master Reset (MR) will force all Q outputs LOW and Q outputs HIGH independent of Clock or Data inputs. The MC74AC/ACT175 is useful for applications where the Clock and Master Reset are common to all storage elements. N SUFFIX CASE 648-08 PLASTIC * Outputs Source/Sink 24 mA * ACT175 Has TTL Compatible Inputs Pinout: 16-Lead Packages (Top View) VCC 16 Q3 15 Q3 14 D3 13 D2 12 Q2 11 Q2 10 CP D SUFFIX CASE 751B-05 PLASTIC 9 PIN NAMES D0 - D3 CP MR Q0 - Q3 Q0 - Q3 1 2 3 4 5 6 7 8 MR Q0 Q0 D0 D1 Q1 Q1 GND Data Inputs Clock Pulse Input Master Reset Input Outputs Outputs LOGIC SYMBOL TRUTH TABLE Inputs Outputs MR CP D Qn Qn L H H H X X H L X L H L Qn H L H Qn L D0 D1 D2 D3 MR Q0 Q0 Q1 Q1 CP H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial = LOW-to-HIGH Transition of Clock FACT DATA 5-1 Q2 Q2 Q3 Q3 MC74AC175 MC74ACT175 LOGIC DIAGRAM MR CP D3 D2 D D1 Q D CP Q CD D Q Q D CP Q CD CP Q CD Q3 Q3 D0 Q2 Q2 Q CP Q CD Q1 Q1 Q0 Q0 Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. MAXIMUM RATINGS* Symbol Parameter Value Unit -0.5 to +7.0 V V VCC DC Supply Voltage (Referenced to GND) Vin DC Input Voltage (Referenced to GND) -0.5 to VCC + 0.5 Vout DC Output Voltage (Referenced to GND) -0.5 to VCC + 0.5 V Iin DC Input Current, per Pin 20 mA Iout DC Output Sink/Source Current, per Pin 50 mA ICC DC VCC or GND Current per Output Pin 50 mA Tstg Storage Temperature -65 to +150 C * Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. RECOMMENDED OPERATING CONDITIONS Symbol Parameter VCC Supply Voltage Vin, Vout DC Input Voltage, Output Voltage (Ref. to GND) tr, tf Input Rise and Fall Time (Note 1) AC Devices except Schmitt Inputs Min Typ Min AC 2.0 5.0 6.0 ACT 4.5 5.0 5.5 0 VCC VCC @ 3.0 V 150 VCC @ 4.5 V 40 VCC @ 5.5 V 25 VCC @ 4.5 V 10 VCC @ 5.5 V 8.0 Unit V V ns/V tr, tf Input Rise and Fall Time (Note 2) ACT Devices except Schmitt Inputs TJ Junction Temperature (PDIP) TA Operating Ambient Temperature Range 85 C IOH Output Current -- HIGH -24 mA IOL Output Current -- LOW 24 mA ns/V 140 -40 1. Vin from 30% to 70% VCC; see individual Data Sheets for devices that differ from the typical input rise and fall times. 2. Vin from 0.8 V to 2.0 V; see individual Data Sheets for devices that differ from the typical input rise and fall times. FACT DATA 5-2 25 C MC74AC175 MC74ACT175 DC CHARACTERISTICS Symbol Parameter VCC (V) 74AC 74AC TA = +25C TA = -40C to +85C Typ VIH VIL VOH 1.5 2.25 2.75 2.1 3.15 3.85 2.1 3.15 3.85 V VOUT = 0.1 V or VCC - 0.1 V Maximum Low Level Input Voltage 3.0 4.5 5.5 1.5 2.25 2.75 0.9 1.35 1.65 0.9 1.35 1.65 V VOUT = 0.1 V or VCC - 0.1 V Minimum High Level Output Voltage 3.0 4.5 5.5 2.99 4.49 5.49 2.9 4.4 5.4 2.9 4.4 5.4 V 2.56 3.86 4.86 2.46 3.76 4.76 0.1 0.1 0.1 0.1 0.1 0.1 3.0 4.5 5.5 0.36 0.36 0.36 0.44 0.44 0.44 5.5 0.1 3.0 4.5 5.5 Maximum Low Level Output Voltage Maximum Input Leakage Current IOLD Minimum Dynamic Output Current ICC Guaranteed Limits 3.0 4.5 5.5 IIN IOHD Conditions Minimum High Level Input Voltage 3.0 4.5 5.5 VOL Unit Maximum Quiescent Supply Current 0.002 0.001 0.001 IOUT = - 50 A *VIN = VIL or VIH - 12 mA IOH - 24 mA - 24 mA V IOUT = 50 A V V *VIN = VIL or VIH 12 mA IOH 24 mA 24 mA 1.0 A VI = VCC, GND 5.5 75 mA VOLD = 1.65 V Max 5.5 -75 mA VOHD = 3.85 V Min 80 A VIN = VCC or GND 5.5 8.0 * All outputs loaded; thresholds on input associated with output under test. Maximum test duration 2.0 ms, one output loaded at a time. Note: IIN and ICC @ 3.0 V are guaranteed to be less than or equal to the respective limit @ 5.5 V VCC. AC CHARACTERISTICS Symbol Parameter VCC* (V) Min 74AC 74AC TA = +25C CL = 50 pF TA = -40C to +85C CL = 50 pF Typ Max Min Unit Fig. No. MHz 3-3 Max fmax Maximum Clock Frequency 3.3 5.0 149 187 tPLH Propagation Delay CP to Qn or Qn 3.3 5.0 2.0 1.5 12.0 9.0 2.0 1.0 13.5 9.5 ns 3-6 tPHL Propagation Delay CP to Qn or Qn 3.3 5.0 2.5 1.5 13.0 9.5 2.0 1.5 14.5 10.5 ns 3-6 tPLH Propagation Delay MR to Qn 3.3 5.0 3.0 2.0 12.5 9.0 2.5 1.5 13.5 10.0 ns 3-6 tPHL Propagation Delay MR to Qn 3.3 5.0 3.0 2.0 11.0 8.5 2.5 1.5 12.5 9.0 ns 3-6 FACT DATA 5-3 139 187 MC74AC175 MC74ACT175 AC OPERATING REQUIREMENTS Symbol VCC* (V) Parameter Typ 74AC 74AC TA = +25C CL = 50 pF TA = -40C to +85C CL = 50 pF Unit Fig. No. Guaranteed Minimum ts Set-up Time, HIGH or LOW Dn to CP 3.3 5.0 4.5 3.0 4.5 3.0 ns 3-9 th Hold Time, HIGH or LOW Dn to CP 3.3 5.0 1.0 1.0 1.0 1.0 ns 3-9 MR Pulse Width Low 3.3 5.0 4.5 3.5 4.5 3.5 ns 3-6 CP Pulse Width 3.3 5.0 4.5 3.5 5.0 3.5 ns 3-6 Recovery TIme MR to CP 3.3 5.0 0 0 0 0 ns 3-6 tw tw trec * Voltage Range 3.3 V is 3.3 V 0.3 V. Voltage Range 5.0 V is 5.0 V 0.5 V. DC CHARACTERISTICS Symbol Parameter VCC (V) 74ACT 74ACT TA = +25C TA = -40C to +85C Typ Guaranteed Limits Unit Conditions VIH Minimum High Level Input Voltage 4.5 5.5 1.5 1.5 2.0 2.0 2.0 2.0 V VOUT = 0.1 V or VCC - 0.1 V VIL Maximum Low Level Input Voltage 4.5 5.5 1.5 1.5 0.8 0.8 0.8 0.8 V VOUT = 0.1 V or VCC - 0.1 V VOH Minimum High Level Output Voltage 4.5 5.5 4.49 5.49 4.4 5.4 4.4 5.4 V 3.86 4.86 3.76 4.76 0.1 0.1 0.1 0.1 4.5 5.5 0.36 0.36 0.44 0.44 V *VIN = VIL or VIH 24 mA IOH 24 mA 0.1 1.0 A VI = VCC, GND 1.5 mA VI = VCC - 2.1 V 4.5 5.5 VOL Maximum Low Level Output Voltage 4.5 5.5 0.001 0.001 V V IOUT = - 50 A *VIN = VIL or VIH - 24 mA IOH - 24 mA IOUT = 50 A IIN Maximum Input Leakage Current 5.5 ICCT Additional Max. ICC/Input 5.5 IOLD Minimum Dynamic Output Current 5.5 75 mA VOLD = 1.65 V Max 5.5 -75 mA VOHD = 3.85 V Min 80 A VIN = VCC or GND IOHD ICC Maximum Quiescent Supply Current 0.6 5.5 8.0 * All outputs loaded; thresholds on input associated with output under test. Maximum test duration 2.0 ms, one output loaded at a time. FACT DATA 5-4 MC74AC175 MC74ACT175 AC CHARACTERISTICS Symbol Parameter VCC* (V) 74ACT 74ACT TA = +25C CL = 50 pF TA = -40C to +85C CL = 50 pF Min Typ Max Min Unit Fig. No. MHz 3-3 Max fmax Maximum Clock Frequency 5.0 175 tPLH Propagation Delay CP to Qn 5.0 2.0 10.0 1.5 11.0 ns 3-6 tPHL Propagation Delay CP to Qn 5.0 2.0 11.0 1.5 12.0 ns 3-6 tPHL Propagation Delay MR to Qn or Qn 5.0 2.0 9.5 1.5 10.5 ns 3-6 Unit Fig. No. 145 * Voltage Range 5.0 V is 5.0 V 0.5 V. AC OPERATING REQUIREMENTS Symbol Parameter VCC* (V) 74ACT 74ACT TA = +25C CL = 50 pF TA = -40C to +85C CL = 50 pF Typ ts (H) Set-up Time, HIGH or LOW (L) Dn to CP Hold Time, HIGH or LOW Dn to CP th tw MR Pulse Width, LOW Guaranteed Minimum 5.0 2.0 2.5 2.0 2.5 ns 3-9 5.0 1.0 1.0 ns 3-9 5.0 3.0 4.0 ns 3-6 tw CP Pulse Width, HIGH or LOW 5.0 3.0 3.5 ns 3-6 trec Recovery TIme MR to CP 5.0 0 0 ns 3-6 * Voltage Range 5.0 V is 5.0 V 0.5 V. CAPACITANCE Symbol Parameter Value Typ Unit Test Conditions CIN Input Capacitance 4.5 pF VCC = 5.0 V CPD Power Dissipation Capacitance 45.0 pF VCC = 5.0 V FACT DATA 5-5 MC74AC175 MC74ACT175 OUTLINE DIMENSIONS N SUFFIX PLASTIC DIP PACKAGE CASE 648-08 ISSUE R -A- 16 9 1 8 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 5. ROUNDED CORNERS OPTIONAL. B F C DIM A B C D F G H J K L M S L S SEATING PLANE -T- K H G D M J 16 PL 0.25 (0.010) T A M M D SUFFIX PLASTIC SOIC PACKAGE CASE 751B-05 ISSUE J -A- 16 1 P 8 PL 0.25 (0.010) 8 M B S G R K F X 45 _ C -T- SEATING PLANE J M D 16 PL 0.25 (0.010) M T B S A S MILLIMETERS MIN MAX 18.80 19.55 6.35 6.85 3.69 4.44 0.39 0.53 1.02 1.77 2.54 BSC 1.27 BSC 0.21 0.38 2.80 3.30 7.50 7.74 0_ 10 _ 0.51 1.01 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. 9 -B- INCHES MIN MAX 0.740 0.770 0.250 0.270 0.145 0.175 0.015 0.021 0.040 0.70 0.100 BSC 0.050 BSC 0.008 0.015 0.110 0.130 0.295 0.305 0_ 10 _ 0.020 0.040 DIM A B C D F G J K M P R MILLIMETERS MIN MAX 9.80 10.00 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.19 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50 INCHES MIN MAX 0.386 0.393 0.150 0.157 0.054 0.068 0.014 0.019 0.016 0.049 0.050 BSC 0.008 0.009 0.004 0.009 0_ 7_ 0.229 0.244 0.010 0.019 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, Toshikatsu Otsuki, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-3521-8315 MFAX: RMFAX0@email.sps.mot.com -TOUCHTONE (602) 244-6609 INTERNET: http://Design-NET.com HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 FACT DATA 5-6 *MC74AC175/D* MC74AC175/D