PI & PM SERIES SPST SEALED PIANO DIP SWITCHES FEATURES Built-in seal for process compatibility. High reliability. Splayed thru-hole or SMT terminals. 2, 4, 6, 8 & 10 positions. Piano style actuators. Dual in-line .100" x .300" term. spacing. GENERAL SPECIFICATIONS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. ELECTRICALS Electrical life Contact rating, non-switching Contact rating, switching Contact resistance at current 100 mA Insulation resistance at 500 VDC Dielectric strength Capacitance 200 cycles min. per switch @ 24 VDC, 25 mA 100 mA at 50 VDC 25 mA at 24 VDC 50 my max. initial - 100 my max. after life test 100 My minimum 300 VAC for 1 minute 5 pf. max. between adjacent terminals MECHANICALS, THERMALS Mechanical life Operating force Vibration Shock Operating temperature range 500 cycles min. per switch 800 grams max. 10-55 Hz.per MIL-STD-202F METHOD 201A 50 G (peak value) for 11 msec. per MIL-STD-202F, METHOD 213B -40C to 85C SOLDERING & CLEANING RECOMMENDATIONS* Hand soldering 320C max. for 2 seconds max.(30 watt iron max.) Wave soldering 260C max. for 5 seconds max. Note PM Series is vapor phase or IR reflow solderable. Force rinse, high agitation or Sealed construction permits washing with freons, alcohol, water triple bath cleaning method and steam. When vapor methods are used, do not subject switch to solvents above 51C. * Note: keep switches in "ON" position during soldering and cleaning for best results MATERIALS Base & Cover Actuators Contacts Terminals Term. Sealing Tape seal UL94V-O, high temperature thermoplastic, color black UL94V-O, high temperature thermoplastic, color .01*white Gold over nickel plated copper alloy or brass Tin/lead (90/10 solder) plated copper alloy or brass Molded-in High temperature modulus Teflon internal seal P M nd P ture a I P a ls fe mode uely q a uni ned g desi alseal! n inter PACKAGING DIP switches are shipped in standard IC tubes with all actuators in the "ON" position. Tape & reel packaging per EIA available for PM models - consult factory. SWITCH CROSS SECTION SCHEMATIC (TYPICAL) Double contact system PI & PM See tabulations on following page for number of positions available (10 shown) P4 APEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com Actuator Style MODEL N0. (internally sealed) 'A' Dimension .012 (0,30mm) Flush PI02090 PI04090 PI06090 PI08090 PI10090 2 4 6 8 10 .290 .490 .690 .890 1.090 (7,37) (12,45) (17,53) (22,61) (27,69) Extended PI02190 PI04190 PI06190 PI08190 PI10190 2 4 6 8 10 .290 .490 .690 .890 1.090 (7,37) (12,45) (17,53) (22,61) (27,69) Auto-insertable using equipment from Amistar, Dynapert, Panasert, Northeastern Tool, Universal and others. + P No. of Pos. PM Series Piano + PI and PM models listed feature a uniquely designed internal seal! Non-sealed versions are also available. To order the non-sealed model, replace the '0' at the end of the model number with '1'. MODEL N0. (internally sealed) No. of Pos. Flush PM02090 PM04090 PM06090 PM08090 PM10090 2 4 6 8 10 .290 .490 .690 .890 1.090 (7,37) (12,45) (17,53) (22,61) (27,69) Extended PM02190 PM04190 PM06190 PM08190 PM10190 2 4 6 8 10 .290 .490 .690 .890 1.090 (7,37) (12,45) (17,53) (22,61) (27,69) Actuator Style 'A' Dimension .012 (0,30mm) P5 APEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. PI Series Piano +