Alcatel 1912 AWG 16 channels 100 GHz DWDM Multiplexers/ DeMultiplexers Description Features The Alcatel 1912 AWG (Arrayed Waveguide Grating) is designed for DWDM systems and belongs to a family of high performance optical routing devices. This component offers an alternative to expensive upgrades by eliminating the cost associated with installing additional fibers. Based on SiO2/Si planar technology, the AWG chip consists of a number of arrayed channel waveguides functioning as diffraction gratings. Compared to other technologies, the AWG structure offers much narrower wavelength channel spacing in ITU channel allocation, high manufacturability and stability, low cross-talk, much smaller insertion loss, long-term reliability and low per-channel cost. * * * * * * Narrow and accurate channel spacing Low, uniform insertion loss Low cross-talk Polarization insensitivity High stability and reliability Temperature stabilization heater Applications * * * * DWDM transmission DWDM based add/drop multiplexing Wavelength-selective routing Optical signal processing Specifications Parameter Number of channel Channel spacing Band profile Center Wavelengths Center Wavelength accuracy Free Spectral Range -1dB bandwidth -3dB bandwidth Insertion Loss Insertion Loss uniformity Polarization sensitivity Cross-talk in adjacent channel Cross-talk in non-adjacent channel Total Cross-talk Optical Return Loss Directivity Polarization Dependent Loss Temperature Stability Temperature Sensitivity Long term stability Symb. f CW CW FSR 1dB 3dB IL IL XTa XTn XTt Rl D PDL Min Max 16 100 Flat top ITU grid 5 2010 0.24 0.48 40 -0.5 -1.3 - 7 1.5 0.03 -25 -30 -22 -40 0.5 0.5 1.3 12.5 Units Comment GHz nm GHz GHz nm nm dB dB nm dB dB dB dB dB dB dB GHz GHz @ ITU wavelengths @ ITU wavelengths @ ITU wavelengths from -5 to 70C from -5 to 70C Absolute maximum ratings Parameter Operating case temperature Storage temperature Min -5 -40 Max +70 +85 Unit C C AWG DWDM Multiplexer/DeMultiplexer Schematic 100 90 9 x 2.54 38.57 10 4 10 5 1 M2.5 15. 5 43 M2.5 bottom view 8.5 10.5 1.2 10 1 4.7 side view Pin Out N 1 2 3 4 5 6 7 8 9 10 Description Positive lead of external temperature controller dc output Negative lead of external temperature controller dc output S3 lead to device temperature sensor S2 lead to device temperature sensor S1 lead to device temperature sensor NC S1 lead to device over temperature sensor S2 lead to device over temperature sensor S3 lead to device over temperature sensor NC 16 48 Ordering information Alcatel 1912 AWG Band C band (low) C band (high) L band (low) L band (high) Standard package Code 3CN 00464 AAAA 3CN 00464 ABAA 3CN 00464 ACAA 3CN 00464 ADAA December 2000 (version1) Copyright (c) 2001 Alcatel Optronics Customized versions are available for large quantities. Performance figures and data contained in this document must be specifically confirmed in writing by Alcatel Optronics before they become applicable to any particular order or contract. Alcatel Optronics reserves the right to make changes to the products or information contained herein without notice. A printed version of this document is an uncontrolled copy. EUROPE Route de Villejust F-91625 NOZAY CEDEX Tel : (+33) 1 64 49 49 10 Fax : (+33) 1 64 49 49 61 CANADA 45, De Villebois, suite 200 Gatineau (PQ) Canada, J8T 8J7 Tel : (+1) 819 243 3755 Fax : (+1) 819 243 3354 Standards ITU-T G.652 optical fiber ITU-T G.653 shifted dispersion fiber IEC 68-2 and MIL STD 883 environment ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES USA 12030 Sunrise Valley Drive RESTON - VA 22091 Tel : (+1) 703 715 3921 Fax : (+1) 703 860 1183 JAPAN Yebisu Garden Place Tower PO Box 5024 20-3, Ebisu 4 - Chome Shibuya - ku TOKYO 150 - 6028 Tel : (+81) 3 5424 85 65 Fax : (+81) 3 5424 85 81