PCF2123TS/1@118 - NXP SEMICONDUCTORS

GP10-4002, GP10-4003, GP10-4004, GP10-4005, GP10-4006, GP10-4007

www.vishay.com Vishay General Semiconductor

Revision: 19-Apr-17 1Document Number: 87651

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Glass Passivated Junction Plastic Rectifier

FEATURES

• Superectifier structure for high reliability

application

• Cavity-free glass-passivated junction

• Low forward voltage drop

• Low leakage current

• High forward surge capability

• Solder dip 275 °C max. 10 s, per JESD 22-B106

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

For use in general purpose rectification of power supplies,

inverters, converters and freewheeling diodes.

MECHANICAL DATA

Case: DO-41 (DO-204AL), molded epoxy over glass body

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS-compliant, commercial grade

Terminals: matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 1A whisker test

Polarity: color band denotes cathode end

PRIMARY CHARACTERISTICS

IF(AV) 1.0 A

VRRM 100 V to 1000 V

IFSM 30 A

IR5.0 μA

VF1.1 V

TJ max. 175 °C

Package DO-41 (DO-204AL)

Circuit configuration Single

DO-41 (DO-204AL)

SUPERECTIFIER®

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL

GP10-4002 GP10-4003 GP10-4004 GP10-4005 GP10-4006 GP10-4007

UNIT

Maximum repetitive peak reverse voltage VRRM 100 to 1000 (fig.5) V

Maximum average forward rectified current

0.375" (9.5 mm) lead length (fig. 1) IF(AV) 1.0 A

Peak forward surge current 8.3 ms single

half sine-wave superimposed on rated load IFSM 30 A

Maximum full load reverse current, full

cycle average, 0.375" (9.5 mm) lead length

at TA = 75 °C

IR(AV) 30 μA

Operating junction and storage

temperature range TJ, TSTG -65 to +175 °C

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER TEST CONDITIONS SYMBOL

GP10-4002 GP10-4003 GP10-4004 GP10-4005 GP10-4006 GP10-4007

UNIT

Maximum

instantaneous

forward voltage

1.0 A VF1.1 V

Maximum DC

reverse current at

rated DC blocking

voltage

TA = 25 °C

5.0

μA

TA = 125 °C 50

Typical reverse

recovery time

IF = 0.5 A, IR = 1.0 A,

Irr = 0.25 A trr 3.0 μs

Typical junction

capacitance 4.0 V, 1 MHz CJ8.0 7.0 pF

GP10-4002, GP10-4003, GP10-4004, GP10-4005, GP10-4006, GP10-4007

www.vishay.com Vishay General Semiconductor

Revision: 19-Apr-17 2Document Number: 87651

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, PCB mounted

RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)

Fig. 1 - Forward Current Derating Curve

Fig. 2 - Maximum Non-repetitive Peak Forward Surge Current

Fig. 3 - Typical Instantaneous Forward Characteristics

Fig. 4 - Typical Reverse Characteristics

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL

GP10-4002 GP10-4003 GP10-4004 GP10-4005 GP10-4006 GP10-4007

UNIT

Typical thermal resistance RJA (1) 55 °C/W

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

GP10-4002-E3/54 0.335 54 5500 13" diameter paper tape and reel

GP10-4002-E3/73 0.335 73 3000 Ammo pack packaging

20406080100 120 140 160 180

0.2

0.4

0.6

0.8

1.0

Ambient Temperature (°C)

Average Forward Rectied Current (A)

GP10-4002 thru GP10-4007

60 Hz

Resistive or Inductive Load

0.375" (9.5 mm) Lead Length

110100

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

TJ = TJ Max.

8.3 ms Single Half Sine-Wave

GP10-4002 thru GP10-4007

0.6 0.8 1.0 1.2 1.4 1.6

100

0.1

0.01

Instantaneous Forward Voltage (V)

Instantaneous Forward Current (A)

GP10-4002 thru GP10-4005

GP10-4006 thru GP10-4007

TJ = 25 °C

Pulse Width = 300 μs

1 % Duty Cycle

020 40 60 80 100

0.01

0.001

0.1

Percent of Rated Peak Reverse Voltage (%)

Instantaneous Reverse Current (μA)

TJ = 125 °C

TJ = 25 °C

TJ = 75 °C

GP10-4002, GP10-4003, GP10-4004, GP10-4005, GP10-4006, GP10-4007

www.vishay.com Vishay General Semiconductor

Revision: 19-Apr-17 3Document Number: 87651

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 5 - Maximum Repetitive Peak Reverse Voltage, VRRM Fig. 6 - Typical Junction Capacitance

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

GP10-4002........ 100 V

GP10-4003........ 200 V

GP10-4004........ 400 V

GP10-4005........ 600 V

GP10-4006........ 800 V

GP10-4007........ 1000 V

0.1 10100

100

Reverse Voltage (V)

Junction Capacitance (pF)

= 25 °C

f = 1.0 MHz

sig

= 50 mV

p-p

GP10-4002 thru GP10-4005

GP10-4006 thru GP10-4007

DO-41 (DO-204AL)

1.0 (25.4)

MIN.

1.0 (25.4)

MIN.

0.205 (5.2)

0.160 (4.1)

0.107 (2.7)

0.080 (2.0)

DIA.

0.034 (0.86)

0.028 (0.71)

DIA.

• Lead diameter isfor sufx “E” part numbers

0.026 (0.66)

0.023 (0.58)

Note

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.