D-Sub Side entry hoods with knurled screws D-Sub Identification Hood1) grey thermoplastic RAL 7032 grey thermoplastic with internal tin-plate screening No. of contacts Part number 9 15 25 37 50 09 67 009 0571 09 67 015 0571 09 67 025 0571 09 67 037 0571 09 67 050 0571 9 15 25 37 50 09 67 009 0573 09 67 015 0573 09 67 025 0573 09 67 037 0573 09 67 050 0573 Drawing Dimensions in mm Upper hood part 9 contacts 15 - 50 contacts f 9-37 way for packaging density of 3 TE (15.24 mm) e a c b d a a max. b min. c d e f 15 39.62 28.40 13.00 14.00 1.00 7.50 25 53.52 42.20 13.00 14.00 1.00 7.50 37 69.80 58.65 13.00 14.00 1.00 7.50 50 67.41 56.18 16.00 17.50 1.50 9.50 Knurled screw Thread UNC 9-50 Thread M3 Lower hood part 3) 09 67 000 99712) 09 67 001 9965* Grey head / Nickel plated steel Thread UNC 9-50 Thread M3 09 67 001 9978 09 67 001 9977 Full metal part Tooling for assembly of hoods 05 146 Top part Bottom part 09 99 000 0215* 09 99 000 0216* * Not normally kept in stock 1) Order knurled screw separately 2) 9 way 1 per hood - 15-50 way 2 per hood Screw driver type ISO PH 1 for philips screw No 1 ISO norm 4757 Operating temperature for all hoods on this page: -30 C ... +100 C 3)