© Semiconductor Components Industries, LLC, 2005
August, 2005 − Rev. 4 1Publication Order Number:
MMSZ4678ET1/D
MMSZ4678ET1 Series
Zener Voltage Regulators
500 mW SOD−123 Surface Mount
Three complete series of Zener diodes are offered in the convenient,
surface mount plastic SOD−123 package. These devices provide a
convenient alternative to the leadless 34−package style.
Features
500 mW Rating on FR−4 or FR−5 Board
Wide Zener Reverse Voltage Range − 1.8 V to 43 V
Package Designed for Optimal Automated Board Assembly
Small Package Size for High Density Applications
ESD Rating of Class 3 (>16 kV) per Human Body Model
Peak Power − 225 W (8 x 20 ms)
Pb−Free Packages are Available
Mechanical Characteristics:
CASE: Void-free, transfer-molded, thermosetting plastic case
FINISH: Corrosion resistant finish, easily solderable
MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES:
260°C for 10 Seconds
POLARITY: Cathode indicated by polarity band
FLAMMABILITY RATING: UL 94 V−0
MAXIMUM RATINGS
Rating Symbol Max Unit
Peak Power Dissipation @ 20 ms (Note 1)
@ TL 25°CPpk 225 W
Total Power Dissipation on FR−5 Board,
(Note 2) @ TL = 75°C
Derated above 75°C
PD500
6.7 mW
mW/°C
Thermal Resistance, (Note 3)
Junction−to−Ambient RqJA 340 °C/W
Thermal Resistance, (Note 3)
Junction−to−Lead RqJL 150 °C/W
Junction and Storage Temperature Range TJ, Tstg −55 to
+150 °C
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
1. Nonrepetitive current pulse per Figure 11.
2. FR−5 = 3.5 x 1.5 inches, using the minimum recommended footprint.
3. Thermal Resistance measurement obtained via infrared Scan Method.
SOD−123
CASE 425
STYLE 1
1
Cathode 2
Anode
See specific marking information in the device marking
column of the Electrical Characteristics table on page 2 o
f
this data sheet.
DEVICE MARKING INFORMATION
1
2
Devices listed in bold, italic are ON Semiconductor
Preferred devices. Preferred devices are recommended
choices for future use and best overall value.
http://onsemi.com
MARKING DIAGRAM
xxx = Device Code (Refer to page 2)
M = Date Code
G= Pb−Free Package
(Note: Microdot may be in either location)
xxx M G
G
1
Device Package Shipping
ORDERING INFORMATION
MMSZ4xxxET1 SOD−123 3000/Tape & Reel
MMSZ4xxxET3 SOD−123 10000/Tape & Ree
l
For information on tape and reel specifications,
including part orientation and tape sizes, please
refer t o our Tape and Reel Packaging Specification
s
Brochure, BRD8011/D.
MMSZ4xxxET1G SOD−123
(Pb−Free) 3000/Tape & Reel
MMSZ4xxxET3G SOD−123
(Pb−Free) 10000/Tape & Ree
l
MMSZ4678ET1 Series
http://onsemi.com
2
ELECTRICAL CHARACTERISTICS (TA = 25°C unless
otherwise noted, VF = 0.95 V Max. @ IF = 10 mA)
Symbol Parameter
VZReverse Zener Voltage @ IZT
IZT Reverse Current
IRReverse Leakage Current @ VR
VRReverse Voltage
IFForward Current
VFForward Voltage @ IF
Zener Voltage Regulator
IF
V
I
IR
IZT
VR
VZVF
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA)
Device* Device
Marking
Zener Voltage (Note 1) Leakage Current
VZ (V) @ IZT IR @ VR
Min Nom Max mAmAV
MMSZ4684ET1 CG3 3.13 3.3 3.47 50 7.5 1.5
MMSZ4688ET1, G CG7 4.47 4.7 4.94 50 10 3
MMSZ4689ET1, G CG8 4.85 5.1 5.36 50 10 3
MMSZ4690ET1 CG9 5.32 5.6 5.88 50 10 4
MMSZ4691ET1 CH1 5.89 6.2 6.51 50 10 5
MMSZ4692ET1 CH2 6.46 6.8 7.14 50 10 5.1
MMSZ4693ET1 CH3 7.13 7.5 7.88 50 10 5.7
MMSZ4697ET1 CH7 9.50 10 10.50 50 1 7.6
MMSZ4699ET1 CH9 11.40 12 12.60 50 0.05 9.1
MMSZ4701ET1, G CJ2 13.3 14 14.7 50 0.05 10.6
MMSZ4702ET1, G CJ3 14.25 15 15.75 50 0.05 11.4
MMSZ4703ET1 CJ4 15.20 16 16.80 50 0.05 12.1
MMSZ4705ET1 CJ6 17.10 18 18.90 50 0.05 13.6
MMSZ4709ET1 CK1 22.80 24 25.20 50 0.01 18.2
MMSZ4711ET1 CK3 25.65 27 28.35 50 0.01 20.4
MMSZ4717ET1 CK9 40.85 43 45.15 50 0.01 32.6
1. Nominal Zener voltage is measured with the device junction in thermal equilibrium at TL = 30°C ±1°C.
*The “G’’ suffix indicates Pb−Free package available.
MMSZ4678ET1 Series
http://onsemi.com
3
TYPICAL CHARACTERISTICS
VZ, TEMPERATURE COEFFICIENT (mV/ C)°θ
VZ, NOMINAL ZENER VOLTAGE (V)
−3
−2
−1
0
1
2
3
4
5
6
7
8
12111098765432
Figure 1. Temperature Coefficients
(Temperature Range −55°C to +150°C)
TYPICAL TC VALUES
VZ @ IZT
VZ, TEMPERATURE COEFFICIENT (mV/ C)°θ
100
10
110 10
0
VZ, NOMINAL ZENER VOLTAGE (V)
Figure 2. Temperature Coefficients
(Temperature Range −55°C to +150°C)
VZ @ IZT
1.2
1.0
0.8
0.6
0.4
0.2
01501251007550250 T, TEMPERATURE (°C)
Figure 3. Steady State Power Derating
PD versus TA
PD versus TL
Ppk, PEAK SURGE POWER (WATTS)
0.1 PW, PULSE WIDTH (ms)
Figure 4. Maximum Nonrepetitive Surge Power
1 10 100 100
0
1000
100
10
1
RECTANGULAR
WAVEFORM, TA = 25°C
100
VZ, NOMINAL ZENER VOLTAGE
Figure 5. Effect of Zener Voltage on
Zener Impedance
101
ZZT, DYNAMIC IMPEDANCE ( )Ω
1000
100
10
1
TJ = 25°C
IZ(AC) = 0.1 IZ(DC)
f = 1 kHz
IZ = 1 mA
5 mA
20 mA
VF, FORWARD VOLTAGE (V)
Figure 6. Typical Forward Voltage
1
.2
1.11.00.90.80.70.60.50.4
IF, FORWARD CURRENT (mA)
1000
100
10
1
75 V (MMSZ5267BT1)
91 V (MMSZ5270BT1)
150°C75°C 25°C 0°C
TYPICAL TC VALUES
PD, POWER DISSIPATION (WATTS)
MMSZ4678ET1 Series
http://onsemi.com
4
TYPICAL CHARACTERISTICS
C, CAPACITANCE (pF)
100
VZ, NOMINAL ZENER VOLTAGE (V)
Figure 7. Typical Capacitance
1000
100
10
1101
BIAS AT
50% OF VZ NOM
TA = 25°C
0 V BIAS
1 V BIAS
12
VZ, ZENER VOLTAGE (V)
100
10
1
0.1
0.01 1086420
TA = 25°C
I
Z
, ZENER CURRENT (mA)
VZ, ZENER VOLTAGE (V)
100
10
1
0.1
0.0110 30 50 70 90
TA = 25°C
IR, LEAKAGE CURRENT ( A)m
9
0
VZ, NOMINAL ZENER VOLTAGE (V)
Figure 8. Typical Leakage Current
1000
100
10
1
0.1
0.01
0.001
0.0001
0.00001 80706050403020100
+150°C
+25°C
−55°C
IZ, ZENER CURRENT (mA)
Figure 9. Zener Voltage versus Zener Current
(VZ Up to 12 V) Figure 10. Zener Voltage versus Zener Current
(12 V to 91 V)
100
Figure 11. 8 × 20 ms Pulse Waveform
90
80
70
60
50
40
30
20
10
0020406080
t, TIME (ms)
tP
tr
PULSE WIDTH (tP) IS DEFINED
AS THAT POINT WHERE THE
PEAK CURRENT DECAY = 8 ms
HALF VALUE IRSM/2 @ 20 ms
% OF PEAK PULSE CURRENT
PEAK VALUE IRSM @ 8 ms
MMSZ4678ET1 Series
http://onsemi.com
5
PACKAGE DIMENSIONS
SOD−123
CASE 425−04
ISSUE E
STYLE 1:
PIN 1. CATHODE
2. ANODE
1.22
0.048
ÉÉÉ
ÉÉÉ
ÉÉÉ
0.91
0.036
2.36
0.093
4.19
0.165
ǒmm
inchesǓ
SCALE 10:1
ÉÉÉ
ÉÉÉ
ÉÉÉ
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
ÂÂÂÂ
ÂÂÂÂ
ÂÂÂÂ
E
b
DA
L
C
1
2
A1
DIM MIN NOM MAX
MILLIMETERS INCHES
A0.94 1.17 1.35 0.037
A1 0.00 0.05 0.10 0.000
b0.51 0.61 0.71 0.020
c
1.60
0.15
0.055D1.40 1.80
E2.54 2.69 2.84 0.100
−−−
3.68 0.140
L0.25
3.86
0.010
HE
0.046
0.002
0.024
0.063
0.106
0.145
0.053
0.004
0.028
0.071
0.112
0.152
MIN NOM MAX
3.56
HE
−−−
−−− −−−
0.006
−−− −−−
−−− −−−
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its of ficers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
MMSZ4678ET1/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.