DS14C88 www.ti.com SNLS080C - MAY 1998 - REVISED APRIL 2013 DS14C88 Quad CMOS Line Driver Check for Samples: DS14C88 FEATURES DESCRIPTION * * * * The DS14C88, pin-for-pin compatible to the DS1488/MC1488, is a quad line drivers designed to interface data terminal equipment (DTE) with data circuit-terminating equipment (DCE). This device translates standard TTL/CMOS logic levels to levels conforming to EIA-232-D and CCITT V.28 standards. 1 2 Meets EIA-232D and CCITT V.28 Standards LOW Power Consumption Wide Power Supply Range: 5V to 12V Available in SOIC Package The device is fabricated in low threshold CMOS metal gate technology. The device provides very low power consumption compared to its bipolar equivalents: 500 A (DS14C88) versus 25 mA (DS1488). The DS14C88 simplifies designs by eliminating the need for external slew rate control capacitors. Slew rate control in accordance with EIA-232D is provided on-chip, eliminating the output capacitors. Connection Diagram Figure 1. SOIC or PDIP Package- Top View See Package Number NFF0014A or D0014A These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 1998-2013, Texas Instruments Incorporated DS14C88 SNLS080C - MAY 1998 - REVISED APRIL 2013 www.ti.com Absolute Maximum Ratings (1) (2) (3) (4) Supply Voltage V+ Pin +13V V- Pin -13V (V+) +0.3V to GND -0.3V Driver Input Voltage |(V+) - VO| 30V Driver Output Voltage |(V-) - VO| 30V Continuous Power Dissipation @+25C (5) NFF0014A Package 1513 mW D0014A Package 1063 mW Junction Temperature +150C Lead Temperature (Soldering 4 seconds) +260C -65C to +150C Storage Temperature Range (1) (2) (3) (4) (5) "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be Ensured. They are not meant to imply that the devices should be operated at these limits. The tables of "Electrical Characteristics" specify conditions for device operation. If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications. This Product does not meet 2000V ESD rating. ESD Rating (HBM, 1.5 k, 100 pF) 1.0 kV. Derate NFF0014A Package 12.1 mW/C, and D0014A Package 8.5 mW/C above +25C. Recommended Operating Conditions Min Max Units V Supply (GND = 0V) +4.5 +12.6 V V- Supply (GND = 0V) -4.5 -12.6 V + Operating Free Air Temp. (TA) DS14C88 0 +75 C Electrical Characteristics Over Recommended Operating Conditions, unless otherwise specified Parameter IIL Maximum Low Input Current Test Conditions Min Typ VIN = GND + Max Units +10 A IIH Maximum High Input Current VIN = V -10 VIL Low Level Input Voltage V+ +7V, V- -7V GND 0.8 V V+ < +7V, V-> -7V GND 0.6 V + VIH High Level Input Voltage VOL Low Level Output Level 2.0 VIN = VIH RL = 3 k or 7 k V V V+ = 4.5V, V- = -4.5V -4.0 -3.0 V V+ = 9V, V- = 9V -8.0 -6.5 V -10.5 -9.0 V + - V = 12V, V = -12V VOH High Level Output Level VIN = VIL RL = 3 k or 7 k V+ = 4.5V, V- = -4.5V 3.0 4.0 V V+ = 9V, V- = -9V 6.5 8.0 V V+ = 12V, V- = -12V 9.0 10.5 V High Level Output Short Circuit Current (1) VIN = 0.8V, VO = GND IOS- Low Level Output Short Circuit Current (1) VIN = 2.0V, VO = GND ROUT Output Resistance V+ = V- = GND = 0V -2V VO +2V (2) (Figure 2 ) (2) 2 + - V = +12V, V = -12V IOS+ (1) A -45 mA +45 mA 300 IOS+ and IOS- values are for one output at a time. If more than one output is shorted simultaneously, the device dissipation may be exceeded. Power supply (V+, V-) and GND pins are connected to ground for the Output Resistance Test (RO). Submit Documentation Feedback Copyright (c) 1998-2013, Texas Instruments Incorporated Product Folder Links: DS14C88 DS14C88 www.ti.com SNLS080C - MAY 1998 - REVISED APRIL 2013 Electrical Characteristics (continued) Over Recommended Operating Conditions, unless otherwise specified Parameter ICC+ Positive Supply Current Test Conditions Max Units V = 4.5V, V = -4.5V 10 A V+ = 9V, V- = -9V 30 A V+ = 12V, V- = -12V 60 A V+ = 4.5V, V- = -4.5V 50 A - V = 9V, V = -9V 300 A V+ = 12V, V- = -12V 500 A V+ = 4.5V, V- = -4.5V -10 A - V = 9V, V = -9V -10 A V+ = 12V, V- = -12V -10 A V+ = 4.5V, V- = -4.5V -30 A - V = 9V, V = -9V -30 A V+ = 12V, V- = -12V -60 A Typ Max Units V = +4.5V, V = -4.5V 1.5 6.0 s V+ = +9.0V, V- = -9.0V 1.2 5.0 s V+ = +12V, V- = -12V 1.2 4.0 s V = +4.5V, V = -4.5V 1.5 6.0 s V+ = +9.0V, V- = -9.0V 1.35 5.0 s V+ = +12V, V- = -12V 1.3 4.0 s VIN = VILmax RL = OPEN VIN = VIHmin RL = OPEN ICC- Negative Supply Current Min + VIN = VILmax RL = OPEN + VIN = VIHmin RL = OPEN + Typ - + Switching Characteristics (1) (2) Over Recommended Operating Conditions, unless otheriwse specified (Figure 3, Figure 4) Parameter tPLH tPHL Propagation Delay Low to High Propagation Delay High to Low Test Conditions + + - (3) tr Rise Time tf Fall Time (3) tsk Typical Propagation Delay Skew 0.2 1.0 s 0.2 1.0 s V+ = +4.5V, V- = -4.5V 250 ns V+ = +9.0V, V- = -9.0V 200 ns 150 ns + - V = +12V, V = -12V SR (1) (2) (3) Output Slew Rate (3) Min - RL = 3 k to 7 k CL = 15 pF to 2500 pF 30 V/s AC input test waveforms for test purposes: tr = tf 20 ns, VIH = 2V, VIL = 0.8V (0.6V at V+ = 4.5V, V- = -4.5V) Input rise and rall times must not exceed 5 s. The output slew rate, rise time, and fall time are measured from the +3.0V to the -3.0V level on the output waveform. Submit Documentation Feedback Copyright (c) 1998-2013, Texas Instruments Incorporated Product Folder Links: DS14C88 3 DS14C88 SNLS080C - MAY 1998 - REVISED APRIL 2013 www.ti.com Parameter Measure Information Figure 2. Output Resistance Test Circuit (Power-Off) Figure 3. Driver Load Circuit (4) Figure 4. Driver Switching Waveform (4) CL include jig and probe capacitances. TYPICAL APPLICATION INFORMATION Figure 5. EIA-232D Data Transmission 4 Submit Documentation Feedback Copyright (c) 1998-2013, Texas Instruments Incorporated Product Folder Links: DS14C88 DS14C88 www.ti.com SNLS080C - MAY 1998 - REVISED APRIL 2013 REVISION HISTORY Changes from Revision B (April 2013) to Revision C * Page Changed layout of National Data Sheet to TI format ............................................................................................................ 4 Submit Documentation Feedback Copyright (c) 1998-2013, Texas Instruments Incorporated Product Folder Links: DS14C88 5 PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) DS14C88M/NOPB ACTIVE SOIC D 14 55 Green (RoHS & no Sb/Br) SN Level-1-260C-UNLIM 0 to 70 DS14C88M DS14C88MX/NOPB ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) SN Level-1-260C-UNLIM 0 to 70 DS14C88M (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 1-Oct-2016 TAPE AND REEL INFORMATION *All dimensions are nominal Device DS14C88MX/NOPB Package Package Pins Type Drawing SOIC D 14 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 2500 330.0 16.4 Pack Materials-Page 1 6.5 B0 (mm) K0 (mm) P1 (mm) 9.35 2.3 8.0 W Pin1 (mm) Quadrant 16.0 Q1 PACKAGE MATERIALS INFORMATION www.ti.com 1-Oct-2016 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) DS14C88MX/NOPB SOIC D 14 2500 367.0 367.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE AND DISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES "AS IS" AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI's products are provided subject to TI's Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI's provision of these resources does not expand or otherwise alter TI's applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2020, Texas Instruments Incorporated