INTEGRATED CIRCUITS DIVISION
www.ixysic.com
DS-CPC1302-R06 1
CPC1302
Dual Optocoupler
High-Voltage Darlington Output
e3
Pb
Part Number Description
CPC1302G 8-Pin DIP (50/Tube)
CPC1302GS 8-Pin Surface Mount (50/Tube)
CPC1302GSTR 8-Pin Surface Mount (1000/Reel)
Parameter Rating Units
Breakdown Voltage - BVCEO 350 VP
Current Transfer Ratio - CTR 1000-8000 %
Applications
Features
Description
Ordering Information
Pin Configuration
Telecom Switching
Tip/Ring Circuits
Hook Switch
Modem Switching (Laptop, Notebook, Pocket Size)
Loop Detect
Ringing Detect
Current Sensing
350VP Breakdown Voltage
3750Vrms Input/Output Isolation
Machine Insertable, Wave Solderable
Surface Mount Tape & Reel Version Available
The CPC1302 is a dual optocoupler with two
identical, independent channels, each having a
unidirectional input and a high-voltage Darlington
output. Light output from the highly efficient GaAlAs
infrared LED activates its associated, optically
coupled silicon NPN photo-Darlington output
transistor. The input LED and the output transistor are
separated by a 3750Vrms isolation barrier.
With a LED current of only 1mA, a current transfer
ratio of 1000% to 8000% is guaranteed at the
collector of the 350V Darlington output transistor.
The CPC1302's low input current capability with
high current transfer ratios, output voltage capability,
and isolation barrier rating make it ideal for many
applications such as telecom, industrial, and power
control.
Approvals
UL 1577 Approved Component: File E76270
CSA Certified Component: Certificate 1172007
EN 60950 Certified Component:
TUV Certificate B 10 05 49410 006
1
2
8
7
3
4
A
K
A
K
C
E
C
E
6
5
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
2R06
CPC1302
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Absolute Maximum Ratings @ 25ºC
Electrical Characteristics @ 25ºC
Parameters Conditions Symbol Min Typ Max Units
Output Characteristics
Phototransistor Breakdown Voltage ICEO=100µA BVCEO 350 - - VP
Emitter-Collector Breakdown Voltage IE=0.1mA BVECO 0.3 - - V
Phototransistor Output (Dark) Current VCEO=200V, IF=0mA ICEO - - 100 nA
Saturation Voltage IC=10mA, IF=1mA VCE(sat)
--1V
IC=100mA, IF=10mA - - 1.2 V
Current Transfer Ratio IF=1mA, VCE=1V CTR 1000 5500 8000 %
Output Capacitance VCEO=50V, f=1MHz COUT -13-pF
Input Characteristics
Input Control Current IC=10mA, VCE=1V IF- 0.07 1 mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Input Reverse Current VR=5V IR- - 10 µA
Common Characteristics
Input to Output Capacitance - CI/O -3-pF
Parameter Ratings Units
Breakdown Voltage, BVCEO 350 VP
Reverse Input Voltage 5 V
Input Control Current 50 mA
Peak (10ms) 1 A
Input Power Dissipation 1 (Each) 150 mW
Phototransistor Power Dissipation 2 (Each) 150 mW
Isolation Voltage, Input to Output 3750 Vrms
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C
1 Derate linearly 1.33 mW / oC
2 Derate linearly 1.5 mW / oC
Characteristic Symbol Test Condition Typ Units
Rise Time tR
VCC=10V
IF=10mA
RL=100
40
s
Fall Time tF5
Turn-On Time ton 5
Storage Time tS20
Turn-Off Time toff 60
Turn-On Time ton VCC=10V
IF=16mA
RL=180
1
Storage Time tS40
Turn-Off Time toff 80
Switching Characteristics @ 25ºC
Switching Time Test Circuit VCC
VCE
RL
IF
Pulse Width=5ms
Duty Cycle=50%
IF
10%
90%
ton toff
t S
VCE t Ft R
INTEGRATED CIRCUITS DIVISION
CPC1302
www.ixysic.com 3
R06
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
LED Forward Voltage (V)
1.10 1.15 1.20 1.25 1.30 1.35 1.40 1.45 1.50 1.55
LED Current (mA)
0
10
20
30
40
50
LED Current (IF) vs.
LED Forward Voltage (VF)
(TA=25ºC)
LED Forward Voltage (V)
1.10 1.15 1.20 1.25 1.30 1.35 1.40 1.45 1.50 1.55
LED Current (mA)
0.1
1
10
100
LED Current (IF) vs.
LED Forward Voltage (VF)
(TA=25ºC)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
LED Forward Voltage (V)
1.0
1.1
1.2
1.3
1.4
1.5
1.6
LED Forward Voltage
vs. Temperature
IF=50mA
IF=20mA
IF=10mA
IF=5mA
IF=2mA
100000
0.1 110 100
10000
1000
100
10
LED Current (mA)
CTR (%)
VCE=1.5V
VCE=1.0V
A
CTR vs. LED Current (IF)
(T = 25ºC)
LED Forward Current (mA)
Collector Current IC (mA)
0.01
1000
100
10
1
0.1 1 10 100
VCE=1.0V
VCE=1.5V
Collector Current vs. LED Current (IF)
(TA = 25ºC)
Collector Current vs. Temperature
Temperature (ºC)
Collector Current IC (mA)
(VCE = 1.2V)
375
300
225
150
75
0
-40 -20 0 20 40 60 80 100
I
F
=10mA
I
F
=5mA
I
F
=1mA
I
F
=0.5mA
Collector-Emitter Voltage VCE (V)
Collector Current IC (mA)
0
180
160
140
120
100
80
60
40
20
00.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Collector Current vs.
Collector-Emitter Voltage
(TA=25ºC)
IF = 1mA
IF = 0.5mA
IF = 2mA
IF = 5mA
IF = 10mA
Temperature (ºC)
Leakage Current (µA)
Leakage vs. Temperature
(VCEO=350V)
3.0
2.5
2.0
1.5
1.0
0.5
0-40 -20 0 20 40 60 80 120100
Breakdown Voltage vs. Temperature
Temperature (ºC)
Breakdown Voltage BVCEO (VP)
-40
450
440
430
420
410
400
390
380
370
-15 10 35 60 85
Load Resistance (:)
10 100 1K 10K 100K
Switching Time (Ps)
0.1
1
10
100
1000
Switching Time vs. Load Resistance
(TA=25ºC)
toff , IF=16mA
toff , IF=1.6mA
ton , IF=1.6mA
ton , IF=16mA
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
4R06
CPC1302
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Rating
CPC1302G / CPC1302GS MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device Maximum Temperature x Time
CPC1302G / CPC1302GS 250ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
e3
Pb
INTEGRATED CIRCUITS DIVISION
CPC1302
www.ixysic.com 5
R06
MECHANICAL DIMENSIONS
Dimensions
mm
(inches)
PCB Hole Pattern
2.540 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
9.144 ± 0.508
(0.360 ± 0.020)
0.457 ± 0.076
(0.018 ± 0.003)
9.652 ± 0.381
(0.380 ± 0.015)
7.239 TYP.
(0.285)
7.620 ± 0.254
(0.300 ± 0.010)
4.064 TYP
(0.160)
0.813 ± 0.102
(0.032 ± 0.004)
8-0.800 DIA.
(8-0.031 DIA.) 2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
Pin 1
0.254 ± 0.0127
(0.010 ± 0.0005)
Dimensions
mm
(inches)
PCB Land Pattern
2.540 ± 0.127
(0.100 ± 0.005)
9.652 ± 0.381
(0.380 ± 0.015)
6.350 ± 0.127
(0.250 ± 0.005)
9.525 ± 0.254
(0.375 ± 0.010)
0.457 ± 0.076
(0.018 ± 0.003)
0.813 ± 0.102
(0.032 ± 0.004)
4.445 ± 0.127
(0.175 ± 0.005)
7.620 ± 0.254
(0.300 ± 0.010)
0.635 ± 0.127
(0.025 ± 0.005)
0.254 ± 0.0127
(0.010 ± 0.0005)
2.54
(0.10)
8.90
(0.3503)
1.65
(0.0649)
0.65
(0.0255)
3.302 ± 0.051
(0.130 ± 0.002)
Pin 1
CPC1302G
CPC1302GS
INTEGRATED CIRCUITS DIVISION
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1302-R06
©Copyright 2012, IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/16/2012
For additional information please visit our website at: www.ixysic.com
6
CPC1302
Dimensions
mm
(inches)
User Direction of Feed
NOTES:
1. Dimensions carry tolerances of EIA Standard 481-2
2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
Embossment
Embossed Carrier
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
330.2 DIA.
(13.00 DIA.)
K1
=4.20
(0.165)
0
K =4.90
(0.193)
P=12.00
(0.472)
W=16.00
(0.63)
Bo=10.30
(0.406)
Ao=10.30
(0.406)
MECHANICAL DIMENSIONS
CPC1302GSTR Tape & Reel
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
IXYS:
CPC1302GS CPC1302GSTR CPC1302G