Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: 1.732.919.3119 • FAX: 1.732.751.5778 • www.dialight.com
This selector guide provides a brief overview of our standard vehicle LED light sources.
Found something you like, but your parameters are slightly different? Complete this form and
fax it to us for consideration - with more than 65 years experience, we may already have your
solution available!
Common modifications include:
Different voltage
Indicate the Series _________, color ________________, voltage _________, circle AC or DC
Internal regulators are not always possible; please indicate whether a regulator is needed, circle
YES or NO. Dialight will provide standard wire leads,
indicate length desired _________, circle unit of measure: inch or mm.
Mounting
Indicate grommet _________, or flange mount _____________________, flange color _________
Coating
Hard coating; circle YES or NO.
Connectorized assembly
Indicate the Series _________, color ________________, voltage _________, length of wires
from front of mounting panel to end of connector ________________, circle unit of measure inch or
mm, wire color for anode ________________, wire color for cathode ________________, desired
connector style indicated by manufacturer name _____________________________________ and
p/n ______________________ .
Custom requirement - please provide us a drawing of your requirement and include all of the
following information so we can expedite our response, and fax to 732-919-5778 or email
info@dialight.com:
Estimated initial order ____________ and Mounting considerations ____________
estimated purchase quantity in first year ____________ Finish ___________________
Target cost __________ Space constraints _________________
Dialight Distributor of choice _________________ Environmental issues ______________
Voltage - AC (also indicate FMVSS, SAE or other
frequency in Hz) or DC or both ____________________ safety requirements _______________
Color _____________________________ NEMA or IP water sealing
Lens style _________________________ requirements _____________________
DRAWING
15
MODIFICATION STATION