Light Touch Switches/EVQP6/6P6/7P6/9P6
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– ES66 –
E V Q
Product Code Height
123456 897
Type4th, 5th, 6th
· With Push Plate, Without Push Plate
· Without Grounf Terminal
· Without Push Plate
· With Grounf Terminal
P6첸
6P6
7P6
9P6
4 mm Square SMD Light Touch Switch es
Type:
EVQP6/EVQ6P6/EVQ7P6/EVQ9P6
■Features
●External dimensions : 4.1 mm҂4.1 mm
Height :Without Push Plate 0.35 mm, With Push Plate 0.58 mm
:Without Push Plate·With Ground Terminal 0.43 mm
●Long-life :1000000 cycles min.
(Operating Force 1.6 N Type)
●Dust-proof structure
■Product Chart
■Explanation of Part Numbers
■Specifi cations
Type Snap action / Push-on type SPST
Without Push Plate With Push Plate
Electrical
Rating 10 µA 2 Vdc to 20 mA 15 Vdc (Resistive load)
Contact Resistance 500 mΩ max.
Insulation Resistance 50 MΩ min.
Dielectric With stand ing Voltage
100 Vac for 1 minute
Bouncing 3 ms max. (ON)
10 ms max. (OFF)
Mechanical Operating Force 1.0 N, 1.6 N, 2.4 N
Travel 0.2 mm (EVQ7P6 : 0.15 mm)
Endurance Operating Life 1.0 N, 1.6 N :1000000 cycles min.
2.4 N : 500000 cycles min.
Operating Temperature –20 °C to +70 °C
Storage Temperature –40 °C to +85 °C (Bulk)
–20 °C to +60 °C (Taping)
Minimum Quantity/Packing Unit 10000 pcs. Embossed Taping (Reel Pack)
Quantity/Carton 50000 pcs.
Note: Non washable
Height Without Push Plate
H=0.35 mm
With Push Plate
H=0.58 mm
Without Push Plate
With Ground Terminal
H=0.43 mm
Packaging
Operating Force Embossed Embossed Embossed
1.0 N — — EVQ7P6
1.6 N EVQP6D EVQP6L EVQ6P6
2.4 N EVQP6P EVQP6Y EVQ9P6
■Recommended Applications
●Operating switches for portable electronic equipment
(Mobile phones, Camcorders, Portable audio players, etc.).
Oct. 201200
Light Touch Switches/EVQP6/6P6/7P6/9P6
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– ES67 –
B'
A'
B
A
0.25
0.58
0.43
B'
A'
B
A
φ1.8
φ2.6
(2-1.6)
(2.6)
(1.5)
(2-0.8)
(1.5)
(1.5)
A
B
A'
B'
(1.9)
(1.4)
(1.4)
(0.85)
(1.4)
(3.7)
(2.4)
(1.6)
B
A
B'
A'
4.7
3.7
3.6
2.2
(5-φ0.4)
(0.
8)
(4.3)
0.6
2.9
4.1±0.2
4.1±0.2
Circuit diagram
Part of A-A' terminal is exposed
at area.
Any land pattern or vias shall not
be provided at area.
PWB land pattern for reference
Circuit diagram
PWB land pattern for reference
✽Markin
g
varies accordin
g
to push force.
(1.7)
(0.6)
(3)
(1.6)
B'
A'
B
A
0.35
B
A
B'
A'
Marking✽
0.25
4.1±0.2
(4.3)
4.1±0.2
2.9
0.6
Part of A-A' terminal is exposed
at area.
Any land pattern or vias shall not
be provided at area.
B'
A'
B
A
(1.5) (1.4)
(1.5)
(1.6)
(2.4)
(3.7)
(1.4)
(0.85)
(1.4)
(1.9)
(5-φ0.4)
B'
A'
B
A
(1.4)
4.7
3.7
3.6
2.2
(0.85)
(0.8)
(1.3)
No. 1
■Dimensions in mm (not to scale)
Part Numbers Operating Force Height Operating Life
EVQP6DB351.6 N0.35 mm 1000000 cycles
EVQP6PB352.4 N0.35 mm 500000 cycles
Part Numbers Operating Force Height Operating Life
EVQP6LB551.6 N0.58 mm 1000000 cycles
EVQP6YB552.4 N0.58 mm 500000 cycles
No. 2
EVQP6D
EVQP6P
(Embossed Taping)
Surface mount
For refl ow soldering
Without push plate
EVQP6L
EVQP6Y
(Embossed Taping)
Surface mount
For refl ow soldering
With push plate
Oct. 201200
Light Touch Switches/EVQP6/6P6/7P6/9P6
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– ES68 –
B'
A'
B
A
(0.5)
4.1±0.2
4.1±0.2
2.9
0.6
(4.3)
A
B
A'
B'
4.7
3.7
B
A
Circuit diagram
2.35
2.05
0.7
2.2
3.6
A'
B'
(0.8)
(1.6)
(0.75)
(1.3)
(1.5)
A
B
A'
B'
(1.9)
(1.4)
(0.85)
(1.4)
(3.7)
(2.4)
(1.6)
(1.4) (1.5)
(5-φ0.4)
(2.2)
φ2.6
0.43
0.25
GND
–0.1
+0.15
0.38
Part of A-A' terminal is exposed
at area.
Any land pattern or vias shall not
be provided at area.
PWB land pattern for reference
Operation point
Part Numbers Operating Force Height Operating Life
EVQ7P6B40 1.0 N 0.43 mm 1000000 cycles
EVQ6P6B40 1.6 N 0.43 mm 1000000 cycles
EVQ9P6B40 2.4 N 0.43 mm 500000 cycles
No. 3
EVQ7P6
EVQ6P6
EVQ9P6
(Embossed Taping)
Surface mount
For refl ow soldering
Without push plate
With Ground Terminal
■Dimensions in mm (not to scale)
Oct. 201200
Light Touch Switches/EVQP6/6P6/7P6/9P6
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– ES69 –
T
WA
B
E
C
D
r
t
P2P0
P1
t2
t1
φD0
A
B
Feeding hole
Chip component Tape running direction
Chip pocket
F
W
E
Tape width=12.0 mm
0.3 mm max.
Without Push Plate
With Push Plate
Switch
Mounting surface
Test pole
Leaning angle range
90 °±4°
(vertical direction)
φ1.5
1.3
R0.1±0.05
Slant 0.3 mm max.
Without Push Plate With Push Plate
R0.1±0.05
R0.1±0.05
φ0.8
180
260
MAX.
150
230
90±30 40±10
(Normal Temp.)
Operation Top (°C)
Soldering Time (s)
Fan or Normal Temp.
●Standard Reel Dimensions in mm (not to scale)
■Recommended Operating Conditions
■Recommended Shape of Test Pole
■Recommended Refl ow Soldering Conditions
●Embossed Carrier Tap ing
Unit: mm
Part No.
Height ABWFEP
1P2P0D0 Dia. t1t2
EVQP6
0.35/0.58
4.0±0.2 5.0±0.2 12.0+0.3 5.5±0.1 1.75±0.10 8.0±0.1 2.0±0.1 4.0±0.1 1.5+0.1 0.30±0.05 0.5/0.7+0.2
EVQ6P6
EVQ7P6
EVQ9P6
0.43
–0
–0.1
Item A B C D E
Rate (mm)
φ380.0±2.0 φ80.0±1.0 φ
13.0±0.5 φ21.0±1.0 2.0±0.5
Item W T t r
Rate (mm)
13.5±1.5 17.5±1.0 1.0 to 3.0 1.0±0.5
–0.1
Oct. 201200
