T01120 001229 How to connect ground terminal blocks electrically to the mounting rail Screwdriver Movable foot ensures positive connection to the rail DIN 3 rail DIN 1 rail 2. Screw down the center of the block to tighten the movable foot on the rail 1. Position the block on the mounting rail Blocks can slide on the rail before tightening. Ground terminal blocks electrically connected to the mounting rail MA 2,5/5.P M 4/6.P Spacing 5 mm + 0,08 .200" M 4/6.3A.P Spacing 6 mm + 0,05 .238" Spacing 6 mm + 0,05 .238" Compression clamp DIN 1 - 3 2 R 1 Type Part number Green-yellow MA 2,5/5.P MA 2,5/5.P.V0 0195 488.16 Terminal block for ground wire, same size as MA 2,5/5 terminal block. IEC UL CSA NFC-DIN Characteristics Wire size Compression clamp 0165 488.27 Solid wire Stranded wire Short circuit current Rated wire size / Gauge Other characteristics 0,2-4 mm 0,22-2,5 mm 300A/1s 24-12 AWG 24-12 AWG 24-12 AWG 24-12 AWG 2,5 mm/A3 12 AWG 12 AWG Wire stripping length 10 mm .39" Recomm. screwdriver 3.5 mm .14" Recomm. torque Protection 0,4-0,6 Nm 3.5-5.3 lb.in Part number Type Type Green-yellow MA 4/6.P 0165 113.16 MA 4/6.P.V0 0195 113.05 Terminal block for ground wire, same size as M 4/6 terminal block. IEC UL CSA NFC-DIN 0,2-4 mm 0,22-4 mm 480A/1s 24-10 AWG 24-10 AWG 24-10 AWG 24-10 AWG 4 mm/A4 10 AWG 10 AWG Wire stripping length Recomm. screwdriver Recomm. torque 9,5 mm .37" 4 mm .16" 0,5-0,8 Nm 4.4-7 lb.in Protection Part number Green-yellow - UL 94 V0 M 4/6.3A.P.V0 0195 637.12 Terminal block for ground wire, same size as M 4/6.3A terminal block. IEC UL CSA NFC-DIN 0,2-4 mm 0,22-4 mm 480A/1s 22-10 AWG 22-10 AWG 12 AWG max. 12 AWG max. 4 mm/A4 10 AWG 12 AWG Wire stripping length Recomm. screwdriver Recomm. torque Protection 9,5 mm .37" 4 mm .16" 0,5-0,8 Nm 4.4-7 lb.in Approvals Accessories 1 yellow yellow 2 Separator end section grey On rail : Recomm.screwdriver/Recomm.torque R See markers marking method 78 End section Type Part number th. 2,8 mm FEM6 0103 062.21 th. 2,8 mm FEM6 V0 0199 305.02 th. 3 mm SCF6 0118 707.03 3,5 mm .14" / 0,6 Nm 5.5 lb.in 10 12 Type Part number th. 2,8 mm FEM6 0103 062.21 th. 2,8 mm FEM6 V0 0199 305.02 th. SCF6 3 mm 0118 707.03 4 mm .16" / 0,8 Nm 7.0 lb.in 11 12 Type Part number FEM3AP V0 green th.3 mm 0199 876.26 4 mm .16" / 0,8 Nm 7.0 lb.in 11 12