Stepper gearmotor Data sheet 82 924 052 Series ratio 300 829240 With flat type Hole diam. 3.2mm Shaft ref. Type A B C D E F G H Pushed shaft Round type Standard With flat type 4 -0,018 +0 13,2 max 8 -0,03 +0 3,2 3,5 -0,2 +0 8 With hole type Code Family Type Definition 82 924 052 82924 Stepper gearmotor Motor 82920 1,7W 500 rpm nominal 7,5 /t 48 step/t + Gearbox Ovoide ratio 300 82924052 ratio 300 Product 2 phases 10,7 Ohms/phase General characteristics Motor characteristics (1) Command sequence 829200 Motor type Number of phases W Input power Ohm Phase resistor Mh Phase inductance A Phase current mNm Maintain torque Vcc Voltage per phase deg Step angle % Step precision g.cm Rotor inertia mNm Max. detent torque g Weight Output leads UL style 1569 105C 300V - 4 leads AWG24 Ohm Vcc W rpm Nm A g dBA B 10,7 12,6 0,84 1,0 7,95 Clip CEI60335 CEI60085 CEI60529 CEI60068-2-1/2 Vac class IP C C C D 21,4 32,1 18,9 25,2 1,12 1,41 1,3 1,6 8,56 8,63 0,59 140 35 Screws 600 B 40 -30 -> +70 -40 -> +80 Step 2 + + + 3 + + - 4 + + + Gearbox Charateristics 250 mm +- 10 A 0 6,3 0,49 0,7 6,36 1 + + - 1 2 3 4 5 Type ratio Shaft Front bearing Continuous max. torque Max. Radial force Max. axial force (5) Weight Ovoide (6mm from front face) Nm N N g 81021 300 standard Brass 0,5 80 10 275 1,4 1,2 1 Torque (Nm) Gearmotor characteristics (1) (2) Additional resistor /phase Voltage (phase + add. resistor) Max. output power Speed at max. output power Torque at max. output power Max. current Weight Noise level Motor fixing on gearbox Miscelaneous (1s/2mA/50Hz) Dielectric Motor insulation Degree of protection Temperature range Storage temperature Approvals ROHS EC Drive sequence for Clock Wise rotation 2 7,5 10,7 24 0,59 70 6,3 7,5 5 18,8 6 210 0,8 0,6 0,4 0,2 0 2011/65/UE 2014/30/UE 0 100 200 300 400 500 600 0 0,417 0,833 1,25 1,667 2,083 2,5 700 Hz 2,917 RPM 1,6 1,4 1,2 (3) Continuously rated torque, zero radial and axial loads (4) Max torque for continuous operation at 20 C, decrease this value for higher ambient temperature 0,6 0,4 0,2 0 0 100 200 300 400 500 600 0 0,417 0,833 1,25 1,667 2,083 2,5 A B A+ (over-speed) Max. continuous gearbox torque C 700 Hz 2,917 RPM D D+ (over-speed) Specifications subject to change without notice. Updated 15/09/2016 Crouzet Automatismes 12, rue Jean Jullien-Davin 26902 Valence CEDEX 9 France www.crouzet-motors.com Series 829240 Notes Values without tolerance, are average production values. (1) Cold motor, 20 C ambient temperature, full speed (2) Without taking in count the torque gearbox limts, check gearbox characteristics Power (W) 1 0,8