RGL34A thru RGL34K
Document Number 88698
22-Sep-05
Vishay General Semiconductor
www.vishay.com
1
DO-213AA (GL34)
*Glass-plastic encapsulation
is covered by
Patent No. 3,996,602,
brazed-lead assembly to
Patent No. 3,930,306
Patented*
®
Surface Mount Glass Passivated Junction Fast
Switching Rectifier
Major Ratings and Characteristics
IF(AV) 0.5 V
VRRM 50 V to 800 V
IFSM 10 A
trr 150 ns, 250 ns
VF1.3 V
Tj max. 175 °C
Features
• Superectifier structure for high reliability
condition
• Patented glass-plastic encapsulation technique
• Ideal for automated placement
• Fast switching for high efficiency
• Meets environmental standard MIL-S-19500
• Meets MSL level 1, per J-STD-020C
• Solder Dip 260 °C, 40 seconds
Typical Applications
For use in fast switching rectification of power supply,
inverters, converters, and freewheeling diodes for
consumer, automotive and Telecommunication
Mechanical Data
Case: DO-213AA, molded epoxy over glass body
Epoxy meets UL-94V-0 Flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002B and JESD22-B102D
E3 suffix for commercial grade, HE3 suffix for high
reliability grade (AEC Q101 qualified)
Polarity: Two bands indicate cathode end - 1st band
denotes device type and 2nd band denotes repetitive
peak reverse voltage rating
Maximum Ratings
(TA = 25 °C unless otherwise noted)
Fast switching device: 1st band is Red Symbol RGL34A RGL34B RGL34D RGL34G RGL34J RGL34K Unit
Polarity color bands (2nd Band) Gray Red Orange Yellow Green Blue
Maximum repetitive peak reverse
voltage
VRRM 50 100 200 400 600 800 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 V
Max. average forward rectified current at
TT = 55 °C
IF(AV) 0.5 A
Peak forward surge current 8.3 ms
single half sine-wave superimposed on
rated load
IFSM 10 A
Max. full load reverse current, full cycle
average TA = 55 °C
IR(AV) 30 µA
Operating junction and storage
temperature range
TJ, TSTG - 65 to + 175 °C
www.vishay.com
2
Document Number 88698
22-Sep-05
RGL34A thru RGL34K
Vishay General Semiconductor
Electrical Characteristics
(TA = 25 °C unless otherwise noted)
Thermal Characteristics
(TA = 25 °C unless otherwise noted)
Notes:
(1) Thermal resistance from junction to ambient, 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal
(2) Thermal resistance from junction to terminal, 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal
Ratings and Characteristics Curves
(TA = 25 °C unless otherwise specified)
Parameter Test condition Symbol RGL34 RGL34B RGL34D RGL34G RGL34J RGL34K Unit
Maximum
instantaneous
forward voltage
at 0.5 A VF 1.3 V
Maximum DC reverse
current at rated DC
blocking voltage
TA = 25 °C
TA = 125 °C
IR 5.0
50
µA
Maximum reverse
recovery time
at IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A
trr 150 250 ns
Typical junction
capacitance
at 4.0 V, 1 MHz CJ 4pF
Fast switching device: 1st band is Red Symbol RGL34 RGL34B RGL34D RGL34G RGL34J RGL34K Unit
Maximum thermal resistance RθJA
RθJT
150(1)
70(2)
°C/W
Figure 1. Forward Current Derating Curve
Average Forward Rectified Current (A)
0
0.3
0.4
0.5
0 25 50 75 100 125 150 175
Terminal Temperature ( °C)
0.2
0.1
ResistiveorInductive Load
Figure 2. Maximum Non-Repetitive Peak Forward Surge Current
0
10
12
2.0
4.0
6.0
8.0
1 10010
Peak Forward Surge Current (A)
Number of Cycles at 60 Hz
TJ = TJ max.
8.3 ms Single Half Sine-Wave
RGL34A thru RGL34K
Document Number 88698
22-Sep-05
Vishay General Semiconductor
www.vishay.com
3
Package outline dimensions in inches (millimeters)
Figure 3. Typical Instantaneous Forward Characteristics
Figure 4. Typical Reverse Characteristics
0.40.2 0.80.6 1.2 1.41.0 1.6
0.01
0.1
10
1
InstantaneousForward Current (A)
InstantaneousForward Voltage (V)
TJ = 25 °C
Pulse Width = 300 µs
1% Duty Cycle
020 6040 10080
Percent of Rated Peak Reverse Voltage (%)
0.01
0.1
10
1
Instantaneous Reverse Current (µA)
TJ = 100 °C
TJ = 25 °C
Figure 5. Typical Junction Capacitance
Reverse Voltage (V)
Junction Capacitance (pF)
10
1
1 10 100
TJ = 25 °C
f = 1.0 MHz
Vsig = 50mVp-p
SOLDERABLE ENDS
1st BAND
2nd BAND
0.022 (0.559)
0.016 (0.406)
0.145 (3.683)
0.131(3.327)
D1=
0.066
0.060
(1.676)
(1.524)
D2=D1
+0
- 0.008 (0.20)
1st band denotes type and polarity
2nd band denotes voltage type
D2
DO-213AA (GL34)
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
