YAGEO CORPORATION SMD RESISTORS Low Value Wire Resistors RW Series FEATURES The Resistive Elements Consist of a NI-CU or MN-CU Alloys Ideal for All Types of Current Sensing Low Inductance DIMENSIONS Unit : mm Forming Type oD MB 51 H 0~3.0 t P MN oD oD MK H 51 51 H P 0~3.0 P STYLE RW05NI/MN RW06NI/MN RW08NI/MN RW10NI/MN RW12NI/MN RW14NI/MN P 5 0.2 oD 0.5 0.02 0.6 0.02 0.8 0.03 1.0 0.03 1.2 0.04 1.4 0.04 t 0.7 0.1 0.9 0.1 1.1 0.1 1.3 0.1 1.5 0.1 1.7 0.1 10 0.2 15 0.2 10 0.2 15 0.2 20 0.2 0~3.0 Packaging units: Bulk, 1000pcs *The Height(H)will be changed base on different resistance and pitch(P). 11 10 Note : ELECTRICAL CHARACTERISTICS STYLE RW05NI/MN RW06NI/MN RW08NI/MN RW10NI/MN RW12NI/MN RW14NI/MN Power Rating at 70C 1/10W 1/8W 1/4W 1/2W 3/4W 1W Operating Temp. Range -55C to+125C Derated to 0 Load at +125C Resistance Range 0.005~0.03 Temperature Coefficient 100ppm/C Resistance Tolerance 1%, 2%, 5% *Standard resistance is 0.005~0.03, below or over this resistance on request. ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Temperature Coefficient MIL-STD-202F, Method 304 -55C to +125C 100ppm/C Thermal Shock MIL-STD-202F, Method 107 5 Cycles, -55C to +125C 0.5% Low Temperature Operation MIL-R-55342D, Para.4.7.4 One Hour at -55C Followed by 45 Minutes RCWV 0.5% Short Time Overload MIL-R-55342D, Para.4.7.5 2.5 Times RCWV for 5 Seconds 0.5% Resistance to Soldering Heat MIL-R-55342D, Para.4.7.7 Soldered to Test Board at 260C for 10 Seconds 0.5% Moisture Resistance MIL-STD-202F, Method 106 10 Cycles. Total 240 Hours 0.5% Life MIL-STD-202F, Method 108A 1000 Hours at 70C RCWV Intermittent 0.5% Solderability MIL-STD-202F, Method 208 230C for 5 Seconds 95% min. coverage