Technical Data 9007 Effective March 2019 Supersedes February 2019 BUSSMANN SERIES UL Class CF CUBEFuse holders Agency information 2011/65/EU * 600 V UL Listed, Guide IZLT, File E14853 * 690 V UL Recognized, Guide IZLT2, File E14853 * CSA Certified, Class 6225-01, File 47235, cURus component Certified (30, 60 and 100 A holders) * CE (100 A and below) * RoHS compliant Mounting * 35 mm DIN-Rail/panel (Up to 100 A) * Panel mount (200 to 400 A) Operating and storage temperature range Catalog symbols * TCFH(amps)N (600 V UL Listed) * TCFH(amps)NW (690 V UL Recognized) * -40C to 80C (-40F to 176F) Catalog no. Max holder amps Fuse amp range Description 600 V UL Listed The BussmannTM series CUBEFuseTM holder is a finger-safe modular system of single-pole 30, 60, 100, 200, 225 and 400 amp holders. All holders dovetailed together to create the desired number of poles for the application, including mixed amp ratings between the 30, 60 and 100 amp holders. TCFH30N 30 1-30 TCFH60N 60 1-60 The 200, 225 and 400 amp holders require installing lugs to make conductor connections. These are listed on page 3. TCFH100N 100 1-100 TCFH200N 200 110-200 TCFH225N 225 110-225 TCFH400N 400 110-400 TCFH30NW 30 1-30 TCFH60NW 60 1-60 TCFH100NW 100 1-100 690 V UL Recognized The CUBEFuse holder is available as the 600 V UL(R) Listed version utilizing the time-delay LowPeakTM CUBEFuse (TCF up to 400 A) or fast-acting CUBEFuse (FCF up to 100 A), or the 690 V UL Recognized version utilizing the fast-acting wind CUBEFuse (WCF up to 100 A). Features Ratings * Finger-safe construction for enhanced safety* * Amp rating rejection helps prevent overfusing by rejecting higher fuse amp ratings * Smallest installed fuse and holder footprint of any Class J or R installation * All holders dovetail together to create the required number of poles, mixed 30, 60 and 100 A holders dovetail together * 30, 60 and 100 A holders have dual wire rated box lug terminals for wiring ease * 200, 225 and 400 A holders available with a variety of lugs and terminal shrouds for application flexibility Up to 300 kA SCCR withstands high fault currents * Volts * 600 Vac / 300 Vdc (UL Listed) * * * 690 Vac (UL Recognized up to 100 A) Amps * 30, 60, 100, 200, 225, 400 A SCCR * 300 kA RMS Sym. (30, 60, 100 A UL Listed) * 200 kA RMS Sym. (200, 225, 400 A UL Listed) * 200 kA RMS Sym. (CSA(R) Certified 100 A and below) * 100 kA DC (UL Listed and CSA Certified 100 A and below) * * 50 kA RMS Sym. (UL Recognized) * 200, 225 and 400 A holders require installed shrouds. Technical Data 9007 UL Class CF CUBEFuse holders Effective March 2019 30, 60 and 100 A CUBEFuse holder fuse applications Holder catalog no. CUBEFuse type and amp range Volts TCF and TCF_RN FCF_RN 1-30 1-30 1-60 1-60 1-100 1-100 TCFH30N TCFH60N 600 TCFH100N WCF_RN -- TCFH30NW TCFH60NW 1-30 690 -- -- 1-60 TCFH100NW 1-100 Conductor ratings and torque for 30, 60 and 100 A holders Ratings are for 75C Cu AWG solid/stranded conductors. Torque is in N*m (lb-in). Terminal wire rating Dimensions -- in (mm) Holder catalog no. TCFH30N / TCFH30NW TCFH60N / TCFH60NW TCFH100N / TCFH100NW Single 8-10; 2.8 (25), 12-18; 2.6 (20) 10-14; 2.6 (20), 4-8; 3.9 (35) 10-18; 2.6 (20)**, 1-8; 4.5 (40) Dual 10-18; 2.8 (25)* 10-18; 2.6 (20), 6-8; 3.9 (35) 6; 5.1 (45) * 10-18 AWG stranded, 14-18 AWG solid ** Solid and stranded Stranded Carton quantity and weight Amp rating Qty. Weight per carton lb (kg) 30 12 2.42 (1.10) 60 12 2.57 (1.17) 100 6 1.38 (0.63) All 30, 60 and 100 A CUBEFuse holders dovetail together to create the desired number of poles. Each holder accepts CUBEFuse amp ratings up to its rating. E.g., the 60 amp holder will accept a CUBEFuse from 1 to 60 A. Recommended Bussmann series fuses Type Amp range Data sheet 600 volt UL Listed Time-delay indicating Low-PeakTM 6-100 A Time-delay non-indicating Low-Peak 1-100 A Fast-acting non-indicating 1-100 A 2147 1-100 A 9009 9000 690 volt UL Recognized Fast-acting wind power 2 Eaton.com/bussmannseries Max height with Amps H I J K L M fuse 30 2.3 (58) 0.76 (19) 1.36 (34) 0.15 (4) -- -- 2.36 (60) 60 2.6 (66) 1.03 (26) 1.60 (41) 0.17 (4) -- -- 2.73 (69) 100 2.91 (74) 1.05 (27) 2.01 (51) 0.15 (4) 0.80 (20) 2.51 (64) 3.27 (83) UL Class CF CUBEFuse holders Technical Data 9007 Effective March 2019 200, 225 and 400 A CUBEFuse holder fuse applications Holder catalog no. Volts CUBEFuse amp range TCFH200N 110-200 TCFH225N 600 Vac/300 Vdc Terminal shroud 110-225 TCFH400N 110-400* * Achieving 400 A continuous current requires three ganged holders and installed lug catalog number CCP2-L4B-3 to permit the necessary copper conductor size. Available lug kits For complete installation, the 200, 225 and 400 A CUBEFuse holders require lugs. The table below contains the information necessary for ordering the desired lug kit for the application. Lug All 200, 225 and 400 amp holders require installing lugs. Only three ganged holders can accept terminal shrouds. See table below. Available lugs, conductor ratings and terminal torques Catalog no. Description 200/225 A holders CCP2-L2-1 Stainless steel lug CCP2-L2-1A Aluminum lug* CCP2-MW2-3 3-port multi-wire terminal with shroud* CCP2-MW2-6 6-port multi-wire terminal with shroud* Lugs per cat. no. Wire range AWG (mm2) Wire type/ temp. Conductor torque N*m (lb-in) Lug mounting screw torque N*m (lb-in) 1 1 3 3 350-4 (185-25) 350-4 (185-25) 2-14 (35-2.5) 6-14 (16-2.5) Cu 75C Cu/Al 75C Cu/Al 75C Cu/Al 75C 20.3 (180) 28.2 (250) 7.9 (70) 2.8 (25) 0.9 (8) 13.5 (120) 10.8 (95) 10.8 (95) * These lugs also accept 1/4" quick connect control wire terminals. Order catalog number CCP2-CWK2 (package of 12 terminals). 400 A holders CCP2-L4-1 CCP2-L4-1A CCP2-L4B-3 CCP2-L4B-3A CCP2-L6-3 CCP2-L6-3A Stainless steel lug Aluminum lug Stainless steel lug kit with shroud Aluminum lug kit with shroud 2-port stainless steel lug kit with shroud 2-port aluminum lug kit with shroud 1 1 3 3 3 3 500-3 (240-35) 500-3 (240-35) 750-500 (400-240) 750-500 (400-240) (2) 500-2 (240-35) (2) 500-2 (240-35) Cu 75C Cu/Al 75C Cu 75C Cu/Al 75C Cu 75C Cu/Al 75C 42.0 (375) 42.0 (375) 57.0 (500) 62.0 (550) 42.0 (375) 42.0 (375) 22.0 (200) 10-14 = 3.9 (35) CCP2-MW6-6 6-port multi-wire terminal with shroud 3 1/0-14 (50-2.5) Cu/Al 75C 8 = 4.5 (40) 4-6 = 5.0 (45 1/0-2 = 5.6 (50) This is a lug kit with three lugs and a shroud for installation on three ganged CUBEFuse holders. Carton quantity Accessories Catalog no. CCP2-TS2-3 CCP2-PB2 Holder amps 200/225 CCP2-CWK2 CCP2-TS6-3 CCP2-PB6 400 Catalog no. Description 3-pole terminal shroud Phase barriers (pack of 2) 1/4" QC terminals. Use with CCP2-L2-1A, CCP2-MW2-3 and CCP2-MW2-6 lugs (pack of 12) 3-pole terminal shroud Phase barriers (pack of 2) Recommended Bussmann series fuses Type Time-delay indicating Low-Peak Time-delay non-indicating Low-Peak Amp range Data sheet 110-400 A 9000 Description Qty. 200/225 A holders TCFH200N TCFH225N CCP2-L2-1 CCP2-L2-1A CCP2-MW2-3 CCP2-MW2-6 CCP2-CWK2 CCP2-TS2-3 CCP2-PB2 1-pole 200 A holder 1-pole 225 A holder Stainless steel lug Aluminum lug 3-port multi-wire terminal with shroud 6-port multi-wire terminal with shroud 1/4" quick connect control wire terminals 3-pole terminal shroud Phase barriers (pack of 2) 1 1 1 1 3 3 12 1 2 TCFH400N 1-pole 400 A holder 1 CCP2-L4-1 Stainless steel lug 1 CCP2-L4-1A CCP2-L4B-3 CCP2-L4B-3A CCP2-MW6-6 CCP2-TS6-3 CCP2-PB6 Aluminum lug Aluminum lug kit with shroud Aluminum lug kit with shroud 6-port multi-wire terminal with shroud 3-pole terminal shroud Phase barriers (pack of 2) 1 3 3 3 1 2 400 A holders Eaton.com/bussmannseries 3 Technical Data 9007 UL Class CF CUBEFuse holders Effective March 2019 Dimensions -- mm (in) 200/225 A holder 87.6 (3.4) 40.7 (1.6) 104.8 4.1) 25.3 (1.0) 108.1 (4.2) 34.9 (1.4) 2xO 4.2 (0.2) 282.6 (11.1) 3-pole ganged 200 A holder with installed shroud 23.9 (0.9) 124.5 (4.9) 400 A holder 99.6 (3.9) 27.5 (1.1) 2xO 4.2 (0.2) 33.4 (1.3) 167.7 (6.6) 4 Eaton.com/bussmannseries 139.2 (5.5) 43.66 (1.7) 276.0 (10.9) 3-pole ganged 400 A holder with installed shroud UL Class CF CUBEFuse holders Technical Data 9007 Effective March 2019 Ordering a complete 200/225 A holder installation For a complete installation, select from the following required and optional components, and accessories. Catalog no. Holders Amps TCFH200N Poles 200 1 Order required quantity for installation Required TCFH225N 225 And Lug kits Description CCP2-L2-1 Stainless steel lug, 75 Cu only, 350 kcmil-4, 1 per pack CCP2-L2-1A Aluminum lug, 75C Cu/Al, 350 kcmil-4, 1 per pack CCP2-MW2-3 3-port multi-wire lug, 75C Cu/Al, 2-14, 3 per pack, includes terminal shroud CCP2-MW2-6 6-port multi-wire lug, 75C Cu/Al, 6-14, 3 per pack, includes terminal shroud And Accessories Terminal shrouds Description CCP2-TS2-3 3-pole terminal shroud with phase shields, 1 per pack Phase barriers Description CCP2-PB2 Phase barriers, 2 per pack And Control terminals Description CCP2-CWK2 1/4" quick-connect control wire terminals - mounts on installed lug (cannot be used with lug CCP2-L2-1), 12 per pack Eaton.com/bussmannseries 5 Technical Data 9007 UL Class CF CUBEFuse holders Effective March 2019 Ordering a complete 400 A holder installation For a complete installation, select from the following required and optional components, and accessories. Catalog no. Holder Amps Accessories Required TCFH400N Poles 1 400 Order required quantity for installation And Lug kits Description CCP2-L4-1 Stainless steel lug, 75 Cu only, 500 kcmil-3, 1 per pack CCP2-L4-1A Aluminum lug, 75 Cu only, 500 kcmil-3, 1 per pack CCP2-L4B-3 Stainless steel lug, 75 Cu only, 750-500 kcmil, 3 per pack, includes terminal shroud CCP2-L4B-3A Aluminum lug, 75C Cu/Al, 750-500 kcmil, 3 per pack, includes terminal shroud CCP2-L6-3 2-port stainless steel lug, 75 Cu only, 500 kcmil-2, 3 per pack, includes terminal shroud CCP2-L6-3A CCP2-MW6-6 2-port aluminum lug, 75 Cu only, 500 kcmil-2, 3 per pack, includes terminal shroud 6-port multi-wire lug, 75C Cu/Al, 1/0-14, 3 per pack, includes terminal shroud And Terminal shrouds Description CCP2-TS6-3 3-pole terminal shroud with phase shields, 1 per pack Phase barriers Description CCP2-PB6 Phase barriers, 2 per pack The only controlled copy of this data sheet is the electronic read-only version located on the Eaton network drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com Bussmann Division 114 Old State Road Ellisville, MO 63021 United States Eaton.com/bussmannseries (c) 2019 Eaton All Rights Reserved Printed in USA Publication No. 9007 - BU-SB18087 March 2019 Eaton, Bussmann, CUBEFuse, and Low-Peak are valuable trademarks of Eaton in the US and other countries. You are not permitted to use the Eaton trademarks without prior written consent of Eaton. CSA is a registered trademark of the Canadian Standards Group UL is a registered trademark of the Underwriters Laboratories, Inc. For Eaton's Bussmann series product information, call 1-855-287-7626 or visit: Eaton.com/bussmannseries Follow us on social media to get the latest product and support information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Eaton: TCFH100N TCFH30N TCFH60N TCFH225N TCFH400N