TCFH100N - Bussmann / Eaton

UL Class CF CUBEFuse holders

2011/65/EU

Catalog symbols

• TCFH(amps)N (600 V UL Listed)

• TCFH(amps)NW (690 V UL Recognized)

Description

The Bussmann™ series CUBEFuse™ holder is a

finger-safe modular system of single-pole 30, 60,

100, 200, 225 and 400 amp holders. All holders

dovetailed together to create the desired number

of poles for the application, including mixed amp

ratings between the 30, 60 and 100 amp holders.

The 200, 225 and 400 amp holders require

installing lugs to make conductor connections.

These are listed on page 3.

The CUBEFuse holder is available as the 600 V

UL® Listed version utilizing the time-delay Low-

Peak™ CUBEFuse (TCF up to 400 A) or fast-acting

CUBEFuse (FCF up to 100 A), or the 690 V UL

Recognized version utilizing the fast-acting wind

CUBEFuse (WCF up to 100 A).

Ratings

• Volts

• 600 Vac / 300 Vdc (UL Listed)

• 690 Vac (UL Recognized up to 100 A)

• Amps

• 30, 60, 100, 200, 225, 400 A

• SCCR

• 300 kA RMS Sym. (30, 60, 100 A UL Listed)

• 200 kA RMS Sym. (200, 225, 400 A UL

Listed)

• 200 kA RMS Sym. (CSA® Certified 100 A and

below)

• 100 kA DC (UL Listed and CSA Certified 100

A and below)

• 50 kA RMS Sym. (UL Recognized)

Agency information

• 600 V UL Listed, Guide IZLT, File E14853

• 690 V UL Recognized, Guide IZLT2, File E14853

• CSA Certified, Class 6225-01, File 47235, cURus

component Certified (30, 60 and 100 A holders)

• CE (100 A and below)

• RoHS compliant

Mounting

• 35 mm DIN-Rail/panel (Up to 100 A)

• Panel mount (200 to 400 A)

Operating and storage temperature range

• -40°C to 80°C (-40°F to 176°F)

Catalog no.

Max holder

amps

Fuse amp

range

600 V UL Listed

TCFH30N 30 1-30

TCFH60N 60 1-60

TCFH100N 100 1-100

TCFH200N 200 110-200

TCFH225N 225 110-225

TCFH400N 400 110-400

690 V UL Recognized

TCFH30NW 30 1-30

TCFH60NW 60 1-60

TCFH100NW 100 1-100

Features

• Finger-safe construction for enhanced safety*

• Amp rating rejection helps prevent overfusing

by rejecting higher fuse amp ratings

• Smallest installed fuse and holder footprint of

any Class J or R installation

• All holders dovetail together to create the

required number of poles, mixed 30, 60 and 100

A holders dovetail together

• 30, 60 and 100 A holders have dual wire rated

box lug terminals for wiring ease

• 200, 225 and 400 A holders available with

a variety of lugs and terminal shrouds for

application flexibility

• Up to 300 kA SCCR withstands high fault

currents

* 200, 225 and 400 A holders require installed shrouds.

Technical Data 9007 Effective March 2019

Supersedes February 2019

BUSSMANN

SERIES

Technical Data 9007

Effective March 2019

UL Class CF CUBEFuse holders

Eaton.com/bussmannseries

30, 60 and 100 A CUBEFuse holder fuse applications

Holder

catalog no. Volts

CUBEFuse type and amp range

TCF and TCF_RN FCF_RN WCF_RN

TCFH30N

600

1-30 1-30

—TCFH60N 1-60 1-60

TCFH100N 1-100 1-100

TCFH30NW

690 — —

1-30

TCFH60NW 1-60

TCFH100NW 1-100

Conductor ratings and torque for 30, 60 and 100 A holders

Ratings are for 75°C Cu AWG solid/stranded conductors. Torque is in

N•m (lb-in).

Terminal

wire

rating

Holder catalog no.

TCFH30N /

TCFH30NW

TCFH60N /

TCFH60NW

TCFH100N /

TCFH100NW

Single 8-10; 2.8 (25),

12-18; 2.6 (20)

10-14; 2.6 (20),

4-8; 3.9 (35)

10-18; 2.6 (20)**,

1-8; 4.5 (40)†

Dual 10-18; 2.8 (25)* 10-18; 2.6 (20),

6-8; 3.9 (35) 6; 5.1 (45)†

* 10-18 AWG stranded, 14-18 AWG solid

** Solid and stranded

† Stranded

Carton quantity and weight

Amp rating Qty. Weight per carton lb (kg)

30 12 2.42 (1.10)

60 12 2.57 (1.17)

100 61.38 (0.63)

All 30, 60 and 100 A CUBEFuse holders

dovetail together to create the desired

number of poles. Each holder accepts

CUBEFuse amp ratings up to its rating.

E.g., the 60 amp holder will accept a

CUBEFuse from 1 to 60 A.

Amps H I J K L M

Max

height

with

fuse

30 2.3 (58) 0.76 (19) 1.36 (34) 0.15 (4) — — 2.36 (60)

60 2.6 (66) 1.03 (26) 1.60 (41) 0.17 (4) — — 2.73 (69)

100 2.91 (74) 1.05 (27) 2.01 (51) 0.15 (4) 0.80 (20) 2.51 (64) 3.27 (83)

Dimensions — in (mm)

Recommended Bussmann series fuses

Type Amp range Data sheet

600 volt UL Listed

Time-delay indicating Low-Peak™ 6-100 A 9000

Time-delay non-indicating Low-Peak 1-100 A

Fast-acting non-indicating 1-100 A 2147

690 volt UL Recognized

Fast-acting wind power 1-100 A 9009

Technical Data 9007

Effective March 2019

UL Class CF CUBEFuse holders

Eaton.com/bussmannseries

200, 225 and 400 A CUBEFuse holder fuse applications

Holder catalog no. Volts CUBEFuse amp range

TCFH200N

600 Vac/300 Vdc

110-200

TCFH225N 110-225

TCFH400N 110-400*

* Achieving 400 A continuous current requires three ganged holders

and installed lug catalog number CCP2-L4B-3 to permit the necessary

copper conductor size.

Available lug kits

For complete installation, the 200, 225 and 400 A CUBEFuse holders

require lugs. The table below contains the information necessary for

ordering the desired lug kit for the application.

Accessories

Catalog no.

Holder

amps Description

CCP2-TS2-3

200/225

3-pole terminal shroud

CCP2-PB2 Phase barriers (pack of 2)

CCP2-CWK2 1/4” QC terminals. Use with CCP2-L2-1A,

CCP2-MW2-3 and CCP2-MW2-6 lugs (pack of 12)

CCP2-TS6-3 400 3-pole terminal shroud

CCP2-PB6 Phase barriers (pack of 2)

Recommended Bussmann series fuses

Type Amp range Data sheet

Time-delay indicating Low-Peak 110-400 A 9000

Time-delay non-indicating Low-Peak

Available lugs, conductor ratings and terminal torques

Catalog no. Description

Lugs per

cat. no.

Wire range

AWG (mm2)

Wire type/

temp.

Conductor

torque N•m

(lb-in)

Lug mounting screw

torque N•m (lb-in)

200/225 A holders

CCP2-L2-1 Stainless steel lug 1350-4 (185-25) Cu 75°C 20.3 (180) 0.9 (8)

CCP2-L2-1A Aluminum lug* 1350-4 (185-25) Cu/Al 75°C 28.2 (250) 13.5 (120)

CCP2-MW2-3 3-port multi-wire terminal with shroud*† 32-14 (35-2.5) Cu/Al 75°C 7.9 (70) 10.8 (95)

CCP2-MW2-6 6-port multi-wire terminal with shroud*† 36-14 (16-2.5) Cu/Al 75°C 2.8 (25) 10.8 (95)

* These lugs also accept 1/4” quick connect control wire terminals. Order catalog number CCP2-CWK2 (package of 12 terminals).

400 A holders

CCP2-L4-1 Stainless steel lug 1500-3 (240-35) Cu 75°C 42.0 (375)

22.0 (200)

CCP2-L4-1A Aluminum lug 1500-3 (240-35) Cu/Al 75°C 42.0 (375)

CCP2-L4B-3 Stainless steel lug kit with shroud† 3750-500 (400-240) Cu 75°C 57.0 (500)

CCP2-L4B-3A Aluminum lug kit with shroud† 3750-500 (400-240) Cu/Al 75°C 62.0 (550)

CCP2-L6-3 2-port stainless steel lug kit with shroud 3(2) 500-2 (240-35) Cu 75°C 42.0 (375)

CCP2-L6-3A 2-port aluminum lug kit with shroud 3(2) 500-2 (240-35) Cu/Al 75°C 42.0 (375)

CCP2-MW6-6 6-port multi-wire terminal with shroud† 31/0-14 (50-2.5) Cu/Al 75°C

10-14 = 3.9 (35)

8 = 4.5 (40)

4-6 = 5.0 (45

1/0-2 = 5.6 (50)

† This is a lug kit with three lugs and a shroud for installation on three ganged CUBEFuse holders.

Carton quantity

Catalog no. Description Qty.

200/225 A holders

TCFH200N 1-pole 200 A holder 1

TCFH225N 1-pole 225 A holder 1

CCP2-L2-1 Stainless steel lug 1

CCP2-L2-1A Aluminum lug 1

CCP2-MW2-3 3-port multi-wire terminal with shroud 3

CCP2-MW2-6 6-port multi-wire terminal with shroud 3

CCP2-CWK2 1/4” quick connect control wire terminals 12

CCP2-TS2-3 3-pole terminal shroud 1

CCP2-PB2 Phase barriers (pack of 2) 2

400 A holders

TCFH400N 1-pole 400 A holder 1

CCP2-L4-1 Stainless steel lug 1

CCP2-L4-1A Aluminum lug 1

CCP2-L4B-3 Aluminum lug kit with shroud 3

CCP2-L4B-3A Aluminum lug kit with shroud 3

CCP2-MW6-6 6-port multi-wire terminal with shroud 3

CCP2-TS6-3 3-pole terminal shroud 1

CCP2-PB6 Phase barriers (pack of 2) 2

Lug

Terminal shroud

All 200, 225 and 400 amp holders

require installing lugs. Only

three ganged holders can accept

terminal shrouds. See table below.

Technical Data 9007

Effective March 2019

UL Class CF CUBEFuse holders

Eaton.com/bussmannseries

167.7

(6.6)

27.5

(1.1)

43.66

(1.7)

2xØ 4.2 (0.2)

33.4

(1.3)

400 A holder

276.0

(10.9)

99.6

(3.9)

139.2

(5.5)

3-pole ganged 400 A holder with installed shroud

40.7

(1.6)

25.3

(1.0)

34.9

(1.4)

23.9

(0.9)

124.5

(4.9)

2xØ 4.2 (0.2)

Dimensions — mm (in)

200/225 A holder

87.6

(3.4)

282.6

(11.1)

104.8

4.1)

108.1

(4.2)

3-pole ganged 200 A holder with installed shroud

Technical Data 9007

Effective March 2019

UL Class CF CUBEFuse holders

Eaton.com/bussmannseries

Ordering a complete 200/225 A holder installation

For a complete installation, select from the following required and optional components, and accessories.

Catalog no.

Holders Amps Poles

Required

TCFH200N 200

Order required quantity for installation

TCFH225N 225

And

Lug kits Description

CCP2-L2-1 Stainless steel lug, 75° Cu only, 350 kcmil-4, 1 per pack

CCP2-L2-1A Aluminum lug, 75°C Cu/Al, 350 kcmil-4, 1 per pack

CCP2-MW2-3 3-port multi-wire lug, 75°C Cu/Al, 2-14, 3 per pack, includes terminal shroud

CCP2-MW2-6 6-port multi-wire lug, 75°C Cu/Al, 6-14, 3 per pack, includes terminal shroud

And

Accessories

Terminal shrouds Description

CCP2-TS2-3 3-pole terminal shroud with phase shields, 1 per pack

Phase barriers Description

CCP2-PB2 Phase barriers, 2 per pack

And

Control terminals Description

CCP2-CWK2 1/4” quick-connect control wire terminals - mounts on installed lug (cannot be used

with lug CCP2-L2-1), 12 per pack

UL Class CF CUBEFuse holdersTechnical Data 9007

Effective March 2019

The only controlled copy of this data sheet is the electronic read-only version located on the Eaton network drive. All other copies of this document

are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help

the end user with design applications. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue

or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this

bulletin. Once a product has been selected, it should be tested by the user in all possible applications.

Eaton, Bussmann, CUBEFuse, and Low-Peak

are valuable trademarks of Eaton in the US

and other countries. You are not permitted to

use the Eaton trademarks without prior writ-

ten consent of Eaton.

CSA is a registered trademark of the Canadian

Standards Group

UL is a registered trademark of the

Underwriters Laboratories, Inc.

Eaton

1000 Eaton Boulevard

Cleveland, OH 44122

United States

Eaton.com

Bussmann Division

114 Old State Road

Ellisville, MO 63021

United States

Eaton.com/bussmannseries

Printed in USA

Publication No. 9007 – BU-SB18087

March 2019

For Eaton’s Bussmann series

product information,

call 1-855-287-7626 or visit:

Eaton.com/bussmannseries