MOLDED PLASTIC SMD MICROPROCESSOR CRYSTAL ABSM2 RoHS *H = Pb in high temperature solder (exempt per RoHS 2002/95/EC Annex (7)) Compliant FEATURES: * Suitable for RoHS reflow * Available tight tolerance and temperature stability 12.5 x 4.6 x 3.7mm | | | | | | | | | | | | | | | APPLICATIONS: * Computers, Modems, Microprocessors * Communication, Test equipment * PCMCIA STANDARD SPECIFICATIONS: Parameters Frequency Range Operation Mode Minimum Typical Maximum Units 3.500 ----- 70.000 MHz Notes Fundamental: Standard ----- 3.50 MHz - 30.000 MHz 3rd Overtone: Standard Fundamental: Option. See options below --------- 30.001 MHz - 70.000 MHz C See options Operating Temperature -10 ----- +60 30.001 MHz - 32.000 MHz Storage Temperature -55 ----- +125 C Frequency Tolerance @+25C Frequency Stability over the Operating Temperature ( ref. to +25C) Equivalent series resistance (R1) -50 ----- +50 ppm See options -50 ----- +50 ppm See options Shunt capacitance (C0) ----- ----- 7.0 pF Load capacitance (CL) ----- 18.0 ----- pF Drive Level ----- ----- 100 W Aging -5 ----- +5 ppm Insulation Resistance 500 ----- ----- M See table 1 below Standard (See options if other than STD) @25C3C First year @ 100Vdc 15V Table 1. Standard ESR Frequency (MHz) 3.50 - 3.999 4.000 - 5.999 6.000 - 11.999 12.000 - 32.000 (fund) 30.000 - 35.999 (3rd overtone) 33.000 - 70.000 (3rd overtone) ESR () max. 200 150 100 50 100 80 OPTIONS & PART IDENTIFICATION: (Left blank if standard) ABSM2 MHz - Frequency in MHz Please specify the frequency in MHz. e.g. 16.000MHz ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Packaging Blank: Bulk T: 1000pcs/reel Oscillation Mode Load Capacitance (pF) Please specify CL (min 10pF) in pF or S for series Custom ESR if other than standard R : Specify a value in (e.g.: R40) - F: Fundamental AT for 30MHz<F<32MHz Operating Temp. * E: 0C to +70C B: -20C to +70C C: -30C to +70C N: -30C to +85C D: -40C to +85C Freq. Tolerance* 4: 30 ppm Freq. Stability* Y: 30 ppm H: 35 ppm Z: 100 ppm R: 150 ppm *Frequency tolerance and stability is subject to availability. Please contact Abracon for availability Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.18.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com MOLDED PLASTIC SMD MICROPROCESSOR CRYSTAL ABSM2 RoHS *H = Pb in high temperature solder (exempt per RoHS 2002/95/EC Annex (7)) Compliant 12.5 x 4.6 x 3.7mm | | | | | | | | | | | | | | | OUTLINE DRAWING: Dimensions: Inches (mm) TAPE & REEL: T=Tape and reel (1000pcs/reel) REFLOW PROFILE: Dimensions: mm ATTENTION: Abracon Corporation's products are COTS - Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon's products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.18.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com