Dynapar Veeder-Root Counting Control and Timing Instruments DYNAPAR brand Series 54Z Sensor Veeder-Root brand A103 Totalizing and Preset Counters The 54Z Sensors operate over a wide range of air gaps making them suitable for parts counting and speed sensing applications. The wide operating voltage makes them compatible with most counters, indicators or controllers. The 54Z Series does not require a minimum target speed and can operate from zero up to 20,000 targets per second. Power Requirements: 5-18 VDC, 10 mA plus load. Weight: 2 oz. Operating Temperature: 40 to +105C. Vibration: 15 G, 10 to 2000 Hz. Speed Range: 0 to 20,000 targets/second. Output: 1 sink 17 mA. At 18 V supply; 1 sink 23 mA @ 5 V supply; 1 source 2200 1/2 pull-up. Cable: 105C PVC insulation, 10 feet long. Stock No. Mfr.Os Type Description EACH 687-4104 687-4105 54Z 605213 Pickup Clamp 56.86 6.25 4 The A103 totalizing and preset counters are compact and cost-efficient. Features include a supertwist LCD with .47" (12 mm) high digits and green illumination display backlight capability. 3-volt lithium battery eliminates need for external power. Accepts input signals from dry contact, PNP, or NPN sensors and encoders. High and low speed count inputs. Reset on front panel or remotely. Fits 68 33 mm cut-out. Order quick-attach option modules separately on this page. Front panel rated NEMA 4/IP65. Gears For Series 54Z Stock No. Mfr.Os Type No. of Teeth Pitch Dia. Pitch Rough Hole Bore Largest Hole Possible EACH 687-4106 16002070081 60 3.00" 20" 3/8 " 1.00" 45.41 VEEDER-ROOT brand Series 7990 Tachometer/Totalizer/ Running Hourmeter/Elapsed Time Indicator Low-cost, combined unit, the Series 7990, Model 200 is programmable as tachometer, totalizer, running hourmeter, or precise elapsed time indicator. 8 digit LCD display; 5 digits in tachometer mode, 0.35" high characters. Rugged die-cast metal housing, sealed, meets NEMA 4 standards. Power: 3 volt Lithium battery. Fits 2.6" 1.3" panel cutout, 1" depth. Series 7990 is available without the tachometer mode. Accessories include three snap-on modules, a panel adapter and panel adapter with key-lock reset. Panel adapters retrofit popular electro-mechanical general purpose totalizers. The Screw Terminal Module provides for the convenience of screw terminal connection. The High Voltage AC/DC Input Module features the above, plus provides for input of AC or DC signal of 25 to 270 volts. The TRIAC Input Module features the above, plus provides for AC-type, solid state input devices such as TRIAC switching devices. Stock No. Mfr.Os Type Description EACH 687-3041 687-7990 687-3050 687-3055 687-3060 687-3065 687-3070 799008-101 799008-201 328992-010 328992-020 328992-030 328992-110 328992-120 Totalizer/Running Hourmeter/Elapsed Time Indicator Tachometer/Totalizer/Running Hourmeter/Elapsed Time Indicator Screw Terminal Module High Voltage AC/DC Input Module TRIAC Input Module Panel Adapter, Key Lock Reset Panel Adapter 82.70 102.03 19.16 27.90 31.70 16.90 9.32 Veeder-Root brand OSquireO Predetermining Counters The Backlit LCD Display provides simultaneous count and preset indication. Compact design requires 48 mm panel space, Form C (SPDT) relays, accessory sensor power supply, reset to zero or set to a number operation, two level program and preset data security, NEMA 4/1P65 front panel seal. Power Supply: 95 to 130 VAC, 50/60 Hz, 6 VA max. 10 to 26 VDC, 0.4 A max. Output: Relay Output; Form C, 5 amp resistive at 24 VDC or 120 VAC 3 amp resistive at 240 VAC; 1/8 H.P. at 120/240 VAC. Output Time: 0.01 to 99.99 seconds momentary, or latch. Reset: Pushbutton; selectable enable, remote or automatic. Accessory Power: 12 VDC 25%, 100 mA maximum. Operating Temperature: 32 to 112F (0 to 50C). Stock No. Mfr.Os Type Description EACH 687-9001 687-9002 687-9003 687-9004 A103-000 A103-001 A103-002 A103-007 Totalizer Add/Subtract Totalizer Position Indicator Preset Counter 62.00 82.00 82.00 92.00 DYNAPAR brand A103 Tachometers and Rate Indicators A103 tachometers provide readout of motor, machine shaft or other RPM. Rate indicators provide a readout of virtually any rate: gallons/minute, parts/hour, feet/minute, etc. LCD with backlighting capability. All units use an internal 3-volt single or dual battery. Magnetic input is capacitative coupled; 10 kHz (50% duty cycle); 0.2 V peak (28 WVDC max.). Fits 68 38 mm cutout. Ranges and Resolution: seconds, minutes to 1/10, hours to 1/10, and hours: minutes: seconds. Weight: 2.25 oz. (64 g). Order matching totalizing and preset counters, elapsed time indicators, and quick-action option modules separately on this page. Front panel is rated NEMA 4/IP65 for use in washdown environments. Stock No. Mfr.Os Type Description EACH 687-9005 687-9006 687-9007 687-9008 A103-003 A103-004 A103-005 A103-009 Tachometer Programmable Rate Meter Rate Meter and Totalizer Rate Meter and Totalizer with Pulse Output 68.57 82.00 92.00 101.00 Eagle Signal brand A103 Elapsed and Preset Timers A103 elapsed time indicators and preset timers can be programmed to meet your needs. They display in seconds, minutes, hours, or hours: minutes: seconds. All units use an internal 3-volt single or dual battery. Features include a 7-digit supertwist LCD with .47" (12 mm) high digits and green illumination display backlight capability. Accepts input signals from dry contact, PNP, or NPN sensors. Timing start/stop can be initiated by solid-state signals or mechanical switches. Reset on front panel or remotely. Ranges and Resolution: seconds, minutes to 1/10, hours to 1/10, hours: minutes: seconds. Connections made at screw terminals. Weight: 2.25 oz. (64 g). Order matching counters, rate indicators, and quick-attach option modules separately on this page. Front panel rated NEMA 4/IP65 for use in washdown environments. Stock No. Mfr.Os Type Description EACH 687-9009 687-9010 A103-006 A103-008 Elapsed Time Indicator Preset Timer 59.05 90.97 A103 Series Option Modules Stock No. Mfr.Os Type Count Rate Count Modes Preset 1 Preset 2 Batch Preset Calibrator and Dec. Pt. EACH 687-4100 687-4101 687-4102 687-4103 SQC11000 SQC12000 SQC22000 SQB22000 20.0 Hz 2.5 kHz 2.5 kHz 2.5 kHz add/sub a/s, quad a/s, quad a/s, quad Yes Yes Yes Yes No No Yes No No No No Yes No Yes Yes Yes 173.63 206.47 254.46 242.30 Veeder-Root Series 7999 OMiteO Low cost family of compact totalizers, elapsed-time-indicators, and rate indicators with totalizer. Easy-to-read 8 mm high LCD display. Unidirectional totalizers and timer models are self-powered by a long life lithium battery. Fast panel mounting into a 1" 2" cut out. NEMA-4 rated; CSA certified, UL recognized. Stock No. Mfr.Os Type Description EACH 687-9993 687-1089 687-2015 687-2023 687-2024 687-8940 687-5002 79998D-110 108938-0001 79998D-410 79998D-510 79998D-610 108940-0001 108937-0001 8-digit totalizer, panel reset Adapter module, 5-240 VAC/DC for 79998D-110 8-digit totalizer, bidirectional, panel reset 8-digit timer, sec. or min. and sec., panel reset 8-digit timer, hrs. and min. or hrs. and hun., panel reset 5-240 VAC/DC adapter Screw terminal adapter 34.96 14.90 46.38 44.58 39.47 14.90 12.12 These quick-attach option modules provide a power supply for sensors, display backlighting, timing signals, and mechanical relay output. They accept high or low voltage AC or DC input signals. Low voltage input accepts 15 to 30 VAC or VDC for count input. High voltage input accepts 100 to 260 volt AC/DC for count input. Mechanical relay output is SPDT (Form C); 120/240 VAC, 30 VDC contacts. Stock No. Mfr.Os Type Description EACH 687-9011 687-9012 687-9013 687-9015 687-9016 687-9017 687-9018 687-9019 687-9020 687-9021 A103-A10 A103-A11 A103-A12 A103-A14 A103-A15 A103-A16 A103-A17 A103-A18 A103-A19 A103-A20 HV Input Module Relay Output Module AC Power Supply HV Input/Power Supply Module Power Supply/Relay Module HV Input/Power Supply/Relay Module LV Input Module LV Input/Relay Out Module LV Input/Power Supply LV Input/Power Supply/Relay Module 17.00 17.00 32.00 42.00 42.00 51.96 16.78 27.00 42.00 53.00 Turn To Section 1 For Allied Office Addresses and Local Phone Numbers ALLIED c 191