S-5842A Series www.ablicinc.com DUAL TRIP TEMPERATURE SWITCH IC (THERMOSTAT IC) Rev.2.3_02 (c) ABLIC Inc., 2008-2015 The S-5842A Series is a dual trip temperature switch IC (thermostat IC) which detects two points of temperature. The S-5842A Series operates at the power supply voltage of 2.5 V and the lower current consumption of 10 A typ. A temperature sensor with the negative temperature coefficient, a reference voltage generation circuit, a comparator and a delay circuit are integrated on one chip, and enclosed into the packages SOT-23-6 and SNT-6A. Features Detection temperature: Accuracy of detection temperature: Low voltage operation: Low current consumption: Selectable output form: Selectable output type: Selectable output logic: Operation temperature range: Lead-free, Sn 100%, halogen-free*1 Detection temperature = 10C to 110C, 1C step 2.5C (Only for either detection temperature) VDD = 2.5 V min. (Detection temperature = 20C to 110C) VDD = 2.7 V min. (Detection temperature = 0C to 110C) VDD = 2.8 V min. (Detection temperature = 10C to 110C) IDD = 10 A typ. (Ta = 25C) CMOS output, Nch open-drain output Separate, Integrate "H", "L" Ta = 40C to 125C *1. Refer to " Product Name Structure" for details. Applications Fan control Air-conditioning system Mobile phone Game console Various electronics devices Packages SOT-23-6 SNT-6A 1 DUAL TRIP TEMPERATURE SWITCH IC (THERMOSTAT IC) S-5842A Series Rev.2.3_02 Block Diagrams 1. CMOS output product (Output type: Separate) VDD Temperature sensor Delay circuit Reference voltage generation circuit Logic circuit (selectable) RTH VSS Logic circuit (selectable) Delay circuit DETH DETL RTL Figure 1 2. Nch open-drain output product (Output type: Separate) VDD Temperature sensor Delay circuit Reference voltage generation circuit VSS Delay circuit RTH Figure 2 2 Logic circuit (selectable) Logic circuit (selectable) RTL DETH DETL DUAL TRIP TEMPERATURE SWITCH IC IC (THERMOSTAT IC) S-5842A Series Rev.2.3_02 3. CMOS output product (Output type: Integrate) VDD Temperature sensor Delay circuit Reference voltage generation circuit Logic circuit (selectable) Delay circuit RTH VSS Logic circuit (selectable) DETH DETL RTL Figure 3 4. Nch open-drain output product (Output type: Integrate) VDD Temperature sensor Delay circuit Reference voltage generation circuit VSS Logic circuit (selectable) Delay circuit RTH Logic circuit (selectable) DETH DETL RTL Figure 4 3 DUAL TRIP TEMPERATURE SWITCH IC (THERMOSTAT IC) S-5842A Series Rev.2.3_02 Product Name Structure Users are able to select the output form and type, option for detection temperature's spec and package for the S-5842A Series. 1. Product name 1. 1 SOT-23-6 S - 5842A x xxx - M6T1 x Environmental code U: Lead-free (Sn 100%), halogen-free S: Lead-free, halogen-free *1 Product name (abbreviation) and packing specifications M6T1: SOT-23-6, Tape *2 Option Output form and output type*3 A: CMOS output B: Nch open-drain output C: CMOS output D: Nch open-drain output 1. 2 Separate type Separate type Integrate type Integrate type SNT-6A S - 5842A x xxx - I6T1 U Environmental code U: Lead-free (Sn 100%), halogen-free Product name (abbreviation) and packing specifications I6T1: SNT-6A, Tape *1 *2 Option Output form and output type*3 A: CMOS output B: Nch open-drain output C: CMOS output D: Nch open-drain output Separate type Separate type Integrate type Integrate type *1. Refer to the tape drawing. *2. Refer to " Selection of Product Option". Settings are available in alphabetical order as AAA to ZZZ. *3. Refer to " Selection of Product Option". 2. Packages Table 1 4 Package Drawing Codes Package Name SOT-23-6 Dimension MP006-A-P-SD Tape MP006-A-C-SD Reel MP006-A-R-SD Land SNT-6A PG006-A-P-SD PG006-A-C-SD PG006-A-R-SD PG006-A-L-SD DUAL TRIP TEMPERATURE SWITCH IC IC (THERMOSTAT IC) S-5842A Series Rev.2.3_02 3. Product name list 3. 1 SOT-23-6 Table 2 Option for Detection Temperature's Spec Product Name S-5842AAAAF-M6T1y Output Form and Type CMOS, Separate CMOS, S-5842AAAAG-M6T1y Separate CMOS, S-5842AAAAL-M6T1U Separate CMOS, S-5842AAAAN-M6T1y Separate CMOS, S-5842ACAAM-M6T1y Integrate *1 Either of two detection temperatures accuracy than the other (TDH, TDL). Remark 1. 2. 3. DETH Pin (for Higher Temperature) DETL Pin (for Lower Temperature) Hysteresis Detection Temperature (TDH) Accuracy of Detection Temperature*1 Hysteresis Temperature (THYSH) Output Logic Detection Temperature (TDL) Accuracy of Detection Temperature*1 Temperature 95C 5C "L" 55C 2.5C 5C "L" 60C 5C "H" 0C 2.5C 5C "L" 45C 2.5C 2C "H" 0C 2C "H" 50C 5C "L" 40C 2.5C 5C "L" 45C 2C "L" 0C 2.5C 2C "L" (THYSL) Output Logic (TDH, TDL), an accuracy of 2.5C is set only for the one that user specifies a higher Please contact our sales office for products other than those specified above. Refer to " Selection of Product Option" for details. y: S or U Please select products of environmental code = U for Sn 100%, halogen-free products. 5 DUAL TRIP TEMPERATURE SWITCH IC (THERMOSTAT IC) S-5842A Series 3. 2 Rev.2.3_02 SNT-6A Table 3 Option for Detection Temperature's Spec Product Name S-5842AAAAL-I6T1U S-5842AAAAT-I6T1U S-5842ABAAA-I6T1U S-5842ABAAC-I6T1U Output Form and Type CMOS, Separate CMOS, Separate Nch open-drain, Separate Nch open-drain, Separate Nch open-drain, S-5842ABAAJ-I6T1U Separate Nch open-drain, S-5842ABAAP-I6T1U Separate Nch open-drain, S-5842ABAAV-I6T1U Separate Nch open-drain, S-5842ABAAW-I6T1U Separate Nch open-drain, S-5842ABAAX-I6T1U Separate CMOS, S-5842ACAAS-I6T1U Integrate Nch open-drain, S-5842ADAAH-I6T1U Integrate Nch open-drain, S-5842ADAAK-I6T1U Integrate Nch open-drain, S-5842ADAAQ-I6T1U Integrate *1 Either of two detection temperatures accuracy than the other (TDH, TDL). Remark 6 DETH Pin (for Higher Temperature) DETL Pin (for Lower Temperature) Hysteresis Detection Temperature (TDH) Accuracy of Detection Temperature*1 Hysteresis Temperature (THYSH) Output Logic Detection Temperature (TDL) Accuracy of Detection Temperature*1 Temperature 45C 2.5C 2C "H" 0C 2C "H" 45C 2C "H" 0C 2.5C 2C "L" 62C 2C "H" 3C 2.5C 2C "L" 60C 2C "H" 0C 2.5C 2C "L" 40C 2C "H" 5C 2.5C 2C "L" 70C 5C "L" 50C 2.5C 5C "H" 65C 5C "L" 50C 2.5C 5C "L" 62C 2C "H" 2C 2.5C 2C "H" 55C 5C "H" 10C 2.5C 5C "L" 45C 2C "L" 0C 2.5C 2C "L" 70C 2.5C 5C "L" 5C 5C "H" 60C 2.5C 5C "L" 5C 5C "H" 60C 2C "H" 0C 2.5C 2C "L" (THYSL) Output Logic (TDH, TDL), an accuracy of 2.5C is set only for the one that user specifies a higher Please contact our sales office for products other than those specified above. Refer to " Selection of Product Option" for details. DUAL TRIP TEMPERATURE SWITCH IC IC (THERMOSTAT IC) S-5842A Series Rev.2.3_02 Pin Configurations 1. SOT-23-6 Table 4 Top view Pin No. 6 5 4 1 2 3 4 5 6 1 2 3 Figure 5 *1. *2. Symbol VDD DETL RTL*1 RTH*2 VSS DETH Description Power supply pin Output pin for lower temperature detection TEST pin TEST pin GND pin Output pin for higher temperature detection Set the RTL pin open in use. Set the RTH pin open in use. . 2. SNT-6A Table 5 Pin No. Top view 1 2 3 1 2 3 4 5 6 6 5 4 Figure 6 *1. *2. Symbol DETH VSS RTH*1 RTL*2 DETL VDD Description Output pin for higher temperature detection GND pin TEST pin TEST pin Output pin for lower temperature detection Power supply pin Set the RTH pin open in use. Set the RTL pin open in use. 7 DUAL TRIP TEMPERATURE SWITCH IC (THERMOSTAT IC) S-5842A Series Rev.2.3_02 Absolute Maximum Ratings Table 6 (Ta = 25C unless otherwise specified) Item Symbol VSS 6.5 V V VSS 0.3 to VDD 0.3 V VSS 0.3 to VSS 6.5 V IOHH, IOHL 13 mA IOLH, IOLL 13 *1 650 400*1 40 to 125 65 to 150 mA VDD Pin voltage VRTH, VRTL Output voltage Nch open-drain output product Output pin current Unit VSS 0.3 to VDD 0.3 Power supply voltage (VSS = 0 V) CMOS output product Absolute Maximum Rating VDETH, VDETL SOT-23-6 Power PD dissipation SNT-6A Operation ambient temperature Topr Storage temperature Tstg *1. When mounted on board [Mounted board] (1) Board size : 114.3 mm 76.2 mm t1.6 mm (2) Board name : JEDEC STANDARD51-7 mW mW C C Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. 8 DUAL TRIP TEMPERATURE SWITCH IC IC (THERMOSTAT IC) S-5842A Series Rev.2.3_02 DC Electrical Characteristics 1. CMOS output product Table 7 (Ta = 25C unless otherwise specified) Item Symbol Power supply voltage VDD *1 Condition Detection temperature = 20C to 110C Detection temperature = 0C to 110C Detection temperature = 10C to 110C Min. Typ. Max. Unit Test Circuit 2.5 5.5 V 1 2.7 5.5 V 1 2.8 5.5 V 1 Detection temperature TDET 2.5 TDET TDET 2.5 C 1 TDH or TDL Difference of detection TD VDD = 3.5 V TDET C 1 *2 temperature 5, 2, Hysteresis temperature C 1 THYSH VDD = 3.5 V *3 of DETH pin 2, 5 5, 2, Hysteresis temperature C 1 THYSL VDD = 3.5 V *3 of DETL pin 2, 5 Output current "H" IOHH VDD = 3.5 V, VDETH = 3.0 V 0.5 3.2 mA 2 of DETH pin Output current "H" IOHL VDD = 3.5 V, VDETL = 3.0 V 0.5 3.2 mA 2 of DETL pin Output current "L" IOLH VDD = 3.5 V, VDETH = 0.5 V 0.5 3.0 mA 2 of DETH pin Output current "L" IOLL VDD = 3.5 V, VDETL = 0.5 V 0.5 3.0 mA 2 of DETL pin Current consumption IDD VDD = 3.5 V 10 16 A 1 during operation *1. TDET: set value for detection temperature, TDH: actual detection temperature for higher temperature, TDL: actual detection temperature for lower temperature Either of two detection temperatures (TDH, TDL), an accuracy of 2.5C is set only for the one that user specifies a higher accuracy than the other (TDH, TDL). *2. TDET: set value for detection temperature for higher temperature set value for detection temperature for lower temperature TD: actual difference of detection temperature Set two points of detection temperature so that the difference of detection temperature (TDET) is in 0C to 65C. Users are able to set TDET in 0C, 5C, 10C 60C, 65C. *3. Users are able to select the hysteresis temperature in 5C, 2C, 2C, or 5C. [Fahrenheit Celsius Conversion equation] C = (F 32) 5 / 9 F = 32 C 9 / 5 9 DUAL TRIP TEMPERATURE SWITCH IC (THERMOSTAT IC) S-5842A Series Rev.2.3_02 2. Nch open-drain output product Table 8 Item Symbol Power supply voltage Detection temperature Difference of detection temperature*2 Hysteresis temperature of DETH pin*3 Min. TDH or TDL Detection temperature = 20C to 110C Detection temperature = 0C to 110C Detection temperature = 10C to 110C TD VDD = 3.5 V THYSH VDD = 3.5 V VDD *1 Condition (Ta = 25C unless otherwise specified) Test Typ. Max. Unit Circuit 2.5 5.5 V 1 2.7 5.5 V 1 2.8 5.5 V 1 TDET 2.5 TDET TDET 2.5 C 1 TDET C 1 C 1 5, 2, 2, 5 5, 2, 2, 5 Hysteresis temperature C 1 VDD = 3.5 V THYSL *3 of DETL pin Leakage current ILEAKH VDD = 3.5 V, VDETH = 5.5 V 100 nA 2 of DETH pin Leakage current VDD = 3.5 V, VDETL = 5.5 V 100 nA 2 ILEAKL of DETL pin Output current "L" IOLH VDD = 3.5 V, VDETH = 0.5 V 0.5 3.0 mA 2 of DETH pin Output current "L" VDD = 3.5 V, VDETL = 0.5 V 0.5 3.0 mA 2 IOLL of DETL pin Current consumption IDD VDD = 3.5 V 10 16 1 A during operation *1. TDET: set value for detection temperature, TDH: actual detection temperature for higher temperature, TDL: actual detection temperature for lower temperature Either of two detection temperatures (TDH, TDL), an accuracy of 2.5C is set only for the one that user specifies a higher accuracy than the other (TDH, TDL). *2. TDET: set value for detection temperature for higher temperature set value for detection temperature for lower temperature TD: actual difference of detection temperature Set two points of detection temperature so that the difference of detection temperature (TDET) is in 0C to 65C. Users are able to set TDET in 0C, 5C, 10C 60C, 65C. *3. Users are able to select the hysteresis temperature in 5C, 2C, 2C, or 5C. [Fahrenheit Celsius Conversion equation] C = (F 32) 5 / 9 F = 32 C 9 / 5 AC Electrical Characteristics Table 9 Item Noise suppression time 10 Symbol tdelay Condition VDD = 3.5 V, Ta = detection temperature Min. Typ. Max. Unit Test Circuit 550 s DUAL TRIP TEMPERATURE SWITCH IC IC (THERMOSTAT IC) S-5842A Series Rev.2.3_02 Test Circuits A R 100 k VDD V Open RTH Open RTL *1 DETH S-5842A Series CL R V *1 100 k DETL CIN VSS V CL *1. Resistor (R) is unnecessary for the CMOS output product. Figure 7 Test Circuit 1 A VDD V Open RTH Open RTL DETH S-5842A Series CIN CL V A DETL VSS V A CL Figure 8 Test Circuit 2 11 DUAL TRIP TEMPERATURE SWITCH IC (THERMOSTAT IC) S-5842A Series Rev.2.3_02 Selection of Product Option 1. Description of product option The S-5842A Series is a temperature switch IC (thermostat IC) which detects two points of temperature, and outputs a signal to the exterior. Users are able to select the combination of output type, form and logic, two detection temperatures (TDH, TDL), and hysteresis temperature (THYSH, THYSL). Output form: Set the output logic for each DETH pin and DETL pin. CMOS output Nch open-drain output Output type: for DETH pin and DETL pin, users are able to select two types of output as follows. Separate type: The DETH pin's output inverts during detection of higher temperature The DETL pin's output inverts during detection of lower temperature Integrate type: The DETH pin's output inverts during detection of higher temperature The DETL pin's output inverts during detection of higher and lower temperature Detection temperature (TDH, TDL): TDH is the detection temperature for higher temperature, TDL is the detection temperature for lower temperature. Of two points of detection temperatures (TDH, TDL), select the detection temperature *1 that is to be set the higher accuracy (2.5C accuracy). The detection temperature for higher temperature is selectable in 20C to 110C, in 1C step. The detection temperature for lower temperature is selectable in 10C to 110C, in 1C step. Set two points of detection temperature so that the difference of detection temperature (TDET) is in 0C to 65C. Users are able to set TDET in 0C, 5C, 10C 60C, 65C. The minimum operation voltage varies according to the detection temperature for lower temperature. Detection temperature = 20C to 110C: Detection temperature = 0C to 110C: Detection temperature = 10C to 110C: VDD = 2.5 V min. VDD = 2.7 V min. VDD = 2.8 V min. *1 Either of two detection temperatures (TDH, TDL), an accuracy of 2.5C is set only for the one that user specifies a higher accuracy than the other (TDH, TDL). Hysteresis temperature (THYSH, THYSL): THYSH is the hysteresis temperature for detection temperature for higher temperature, THYSL is the hysteresis temperature for detection temperature for lower temperature. These are selectable in 5C, 2C, 2C, or 5C. 5C: Output recovers when temperature has dropped to 5C from the detection temperature. 2C: Output recovers when temperature has dropped to 2C from the detection temperature. 2C: Output recovers when temperature has risen to 2C from the detection temperature. 5C: Output recovers when temperature has risen to 5C from the detection temperature. Output logic: Set the output logic for each DETH, DETL pin in Ta detection temperature (TDH, TDL) or release temperature (TDH THYSH, TDL THYSL). (1) Hysteresis temperature: 5C, 2C The output logic is "H" in Ta detection temperature The output logic is "L" in Ta detection temperature (2) Hysteresis temperature: 2C, 5C The output logic is "H" in Ta release temperature The output logic is "L" in Ta release temperature 12 Rev.2.3_02 DUAL TRIP TEMPERATURE SWITCH IC IC (THERMOSTAT IC) S-5842A Series 2. Example of product spec Example of Product Spec Operation THYSH Output form: CMOS output Output type: Separate type [DETH pin] Detection voltage: TDH Hysteresis temperature: THYSH ( 0) Output logic: "H" H L DETH pin output TDH THYSL [DETL pin] Detection voltage: TDL Hysteresis temperature: THYSL ( 0) Output logic: "H" Temp H L DETL pin output Temp TDL Figure 9 Operation for CMOS Output and Separate Type THYSH Output form: CMOS output Output type: Integrate type [DETH pin] Detection temperature: TDH Hysteresis temperature: THYSH ( 0) Output logic: "H" L DETH pin output TDH THYSL [DETL pin] Detection temperature: TDL Hysteresis temperature: THYSL ( 0) Output logic: "H" H THYSH Temp H L DETL pin output TDL TDH Temp Figure 10 Operation for CMOS Output and Integrate Type 13 DUAL TRIP TEMPERATURE SWITCH IC (THERMOSTAT IC) S-5842A Series Rev.2.3_02 Operation 1. Separate type The followings are the operation with its specs when the S-5842A Series is Separate type. The timing chart is shown in Figure 11. Output form and type: CMOS output, Separate type Option : DETH pin Detection temperature Hysteresis temperature Output logic DETL pin Detection temperature Hysteresis temperature Output logic (1) (2) (3) (4) TDH = 95C THYSH = 5C "H" TDL = 55C THYSL = 5C "H" (5) Detection temperature (TDH = 95C) Hysteresis temperature (THYSH = 5C) Difference of detection temperature (TD = 40C) Detection temperature (TDL = 55C) Hysteresis temperature (THYSL = 5C) Ambient temperature (Ta) H DETH pin output (Output logic "H") L H DETL pin output (Output logic "H") Figure 11 L Timing Chart for CMOS Output and Separate Type Detecting the temperature is started after power-on. In case; (1) Ambient temperature (Ta) detection temperature (TDL = 55C) The DETH pin output and the DETL pin output keep "L". (2) The ambient temperature (Ta) rises; detection temperature (TDL = 55C) ambient temperature (Ta) detection temperature (TDH = 95C) The DETH pin output keeps "L", the DETL pin output gets "H". (3) Furthermore, the ambient temperature (Ta) rises; ambient temperature (Ta) detection temperature (TDH = 95C) The DETL pin output keeps "H", the DETH pin output gets "H". (4) After that, the ambient temperature (Ta) falls; release temperature (TDH THYSH = 90C) ambient temperature (Ta) release temperature (TDL THYSL = 50C) The DETH pin output gets "L", the DETL pin output keeps "H". (5) Furthermore the ambient temperature (Ta) falls; ambient temperature (Ta) release temperature (TDL THYSL = 50C) The DETH pin output keeps "L", the DETL pin output gets "L". 14 DUAL TRIP TEMPERATURE SWITCH IC IC (THERMOSTAT IC) S-5842A Series Rev.2.3_02 2. Integrate type The followings are the operation with its specs when the S-5842A Series is Separate type. The timing chart is shown in Figure 12. Output form and type: CMOS output, Integrate type Option : DETH pin Detection temperature Hysteresis temperature Output logic DETL pin Detection temperature Hysteresis temperature Output logic (1) (2) (3) (4) TDH = 95C THYSH = 5C "H" TDL = 55C THYSL = 5C "H" (5) Hysteresis temperature (THYSH = 5C) Detection temperature (TDH = 95C) Difference of detection temperature (TD = 40C) Detection temperature (TDL = 55C) Hysteresis temperature (THYSL = 5C) Ambient temperature (Ta) H DETH pin output (Output logic "H") L H DETL pin output (Output logic "H") Figure 12 L Timing Chart for CMOS Output and Integrate Type Detecting the temperature is started after power-on. In case; (1) Ambient temperature (Ta) detection temperature (TDL = 55C) The DETH pin output and the DETL pin output keep "L". (2) The ambient temperature (Ta) rises; detection temperature (TDL = 55C) ambient temperature (Ta) detection temperature (TDH = 95C) The DETH pin output keeps "L", the DETL pin output gets "H". (3) Furthermore, the ambient temperature (Ta) rises; ambient temperature (Ta) detection temperature (TDH = 95C) The DETH pin output gets "H", the DETL pin output gets "L". (4) After that, the ambient temperature (Ta) falls; release temperature (TDH THYSH = 90C) ambient temperature (Ta) release temperature (TDL THYSL = 50C) The DETH pin output gets "L", the DETL pin output gets "H". (5) Furthermore the ambient temperature (Ta) falls; ambient temperature (Ta) release temperature (TDL THYSL = 50C) The DETH pin output keeps "L", the DETL pin output gets "L". 15 DUAL TRIP TEMPERATURE SWITCH IC (THERMOSTAT IC) S-5842A Series Rev.2.3_02 3. Delay circuit The S-5842A Series sets the noise suppression time (tdelay) via the delay circuit. By this, the S-5842A Series prevents false detection operations of DETH pin and DETL pin output. The followings are the operation of the DETH pin output when the output logic is "H". 3. 1 The temperature is the detection temperature or less The output from a comparator is "H", and the DETH pin output is "L". Due to noise or others, the output from a comparator is inverted to "L" once; however, the DETH pin output keeps "L" if this status is tdelay or shorter. 3. 2 The temperature exceeds the detection temperature The output from a comparator gets "L". And the DETH pin output gets "H" after the period has passed tdelay or longer. Standard Circuit R VDD Open RTH Open RTL 100 k DETH R*1 CL S-5842A Series CIN *1 100 k DETL VSS CL *1. Resistor (R) is unnecessary for CMOS output product. Figure 13 Caution The above connection diagram will not guarantee successful operation. Perform thorough evaluation using actual application to set the constant. 16 Rev.2.3_02 DUAL TRIP TEMPERATURE SWITCH IC IC (THERMOSTAT IC) S-5842A Series Precautions Either of two detection temperatures (TDH, TDL), an accuracy of 2.5C is set only for the one that user specifies a higher accuracy than the other (TDH, TDL). Set a capacitor (CIN) of 0.1 F or more between the VDD pin and VSS pin for stabilization. To prevent error due to noise during power-on, set a capacitor (CL) of approx. 0.1 F for the DETH pin and the DETL pin. The S-5842A Series may oscillate by connecting a capacitor to the RTH pin and the RTL pin. Set the RTH pin and the RTL pin open in use. The DETH / DETL pin output a signal that of (Ta detection temperature) by short-circuit the RTH / RTL pin to VSS. Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic protection circuit. ABLIC Inc. claims no responsibility for any disputes arising out of or in connection with any infringement by products, including this IC, of patents owned by a third party. 17 DUAL TRIP TEMPERATURE SWITCH IC (THERMOSTAT IC) S-5842A Series Rev.2.3_02 Characteristics (Typical Data) 1. Current consumption during operation vs. Power supply voltage characteristics 12 IDD [A] 11 +125C 10 -40C 9 8 +85C 7 +25C 6 0.0 1.0 2.0 3.0 4.0 VDD [V] 5.0 6.0 2. Output current "H" of DETH / DETL pin vs. Power supply voltage characteristics (CMOS output product only) IOHH, IOHL [mA] VDETH = VDD 0.5 V, VDETL = VDD 0.5 V 7 6 5 4 3 2 1 0 -40C +25C +85C 0.0 1.0 2.0 +125C 3.0 4.0 VDD [V] 5.0 6.0 3. Output current "L" of DETH / DETL pin vs. Power supply voltage characteristics VDETH = 0.5 V, VDETL = 0.5 V IOLH, IOLL [mA] 10 8 6 -40C +25C 4 2 +85C +125C 0 0.0 1.0 2.0 3.0 4.0 VDD [V] 5.0 6.0 4. Noise suppression time vs. Power supply voltage characteristics 1000 tdelay [s] 750 500 250 0 0.0 18 1.0 2.0 3.0 4.0 VDD [V] 5.0 6.0 DUAL TRIP TEMPERATURE SWITCH IC IC (THERMOSTAT IC) S-5842A Series Rev.2.3_02 5. Response against heat (Output voltage vs. Time) 5. 1 When SNT-6A is put into the air of 100C from the air of 25C at t = 0 s VDD = 3.5 V, CL = 0 F, Detection temperature = 62C, Output logic "H" 4 VDETH [V] 3 2 1 0 -1 0 10 t [s] 20 30 When SNT-6A is put into the liquid of 100C from the air of 25C at t = 0 s VDD = 3.5 V, CL = 0 F, Detection temperature = 62C, Output logic "H" 4 3 VDETH [V] 5. 2 -10 2 1 0 -1 -10 0 10 t [s] 20 30 19 DUAL TRIP TEMPERATURE SWITCH IC (THERMOSTAT IC) S-5842A Series 6. Response against startup 6. 1 Power-on at Ta = 25C TDH = 110C, TDL = 45C, Output logic "H", CL = 0 F VDD (= 3.5 V) 2 V / div. GND DETH 2 V / div. GND DETL 2 V / div. GND t (200 s / div.) 6. 2 Power-on at Ta = 80C TDH = 110C, TDL = 45C, Output logic "H", CL = 0 F VDD (= 3.5 V) 2 V / div. GND DETH 2 V / div. GND DETL 2 V / div. GND t (200 s / div.) 6. 3 Power-on at Ta = 120C TDH = 110C, TDL = 45C, Output logic "H", CL = 0 F VDD (= 3.5 V) 2 V / div. GND DETH 2 V / div. GND DETL 2 V / div. GND t (200 s / div.) 20 Rev.2.3_02 Rev.2.3_02 DUAL TRIP TEMPERATURE SWITCH IC IC (THERMOSTAT IC) S-5842A Series 7. Accuracy of detection temperature High accuracy detection voltage: TDH TDH = 110C, TDL = 45C Measured data on one wafer picked up Accuracy of detection temperature at TDH = 110C (Higher accuracy) Ratio [%] 7. 1 Accuracy of detection temperature at TDL = 45C Ratio [%] 7. 2 70 60 50 40 30 20 10 0 0.0 2.0 2.5 2.5 2.0 1.0 1.0 Deviation in detection temperature [C] 70 60 50 40 30 20 10 0 2.5 2.0 1.0 0.0 1.0 2.0 2.5 Deviation in detection temperature [C] 21 DUAL TRIP TEMPERATURE SWITCH IC (THERMOSTAT IC) S-5842A Series Rev.2.3_02 Marking Specifications 1. SOT-23-6 Top view 6 5 4 (1) to (3): Product code (Refer to Product name vs. Product code) (4): Lot number (1) (2) (3) (4) 1 2 3 Product name vs. Product code Product Name Product Code (1) (2) (3) S-5842AAAAF-M6T1y U I F S-5842AAAAG-M6T1y U I G S-5842AAAAL-M6T1U U I L S-5842AAAAN-M6T1y U I N S-5842ACAAM-M6T1y U J M Remark 1. y: S or U 2. Please select products of environmental code = U for Sn 100%, halogen-free products. 22 DUAL TRIP TEMPERATURE SWITCH IC IC (THERMOSTAT IC) S-5842A Series Rev.2.3_02 2. SNT-6A Top view 6 5 4 (1) to (3): Product code (Refer to Product name vs. Product code) (4) to (6): Lot number (1) (2) (3) (4) (5) (6) 1 2 3 Product name vs. Product code Product Name S-5842AAAAL-I6T1U Product Code (1) (2) (3) U I L S-5842AAAAT-I6T1U U I T S-5842ABAAA-I6T1U U H A S-5842ABAAC-I6T1U U H C S-5842ABAAJ-I6T1U U H J S-5842ABAAP-I6T1U U H P S-5842ABAAV-I6T1U U H V S-5842ABAAW-I6T1U U H W S-5842ABAAX-I6T1U U H X S-5842ACAAS-I6T1U U J S S-5842ADAAH-I6T1U U G H S-5842ADAAK-I6T1U U G K S-5842ADAAQ-I6T1U U G Q 23 2.90.2 1.90.2 6 0.95 4 5 1 2 3 +0.1 0.15 -0.05 0.95 0.350.15 No. MP006-A-P-SD-2.1 TITLE SOT236-A-PKG Dimensions No. MP006-A-P-SD-2.1 ANGLE UNIT mm ABLIC Inc. 4.00.1(10 pitches:40.00.2) +0.1 o1.5 -0 +0.2 o1.0 -0 2.00.05 0.250.1 4.00.1 1.40.2 3.20.2 3 2 1 4 5 6 Feed direction No. MP006-A-C-SD-3.1 TITLE SOT236-A-Carrier Tape No. MP006-A-C-SD-3.1 ANGLE UNIT mm ABLIC Inc. 12.5max. 9.00.3 Enlarged drawing in the central part o130.2 (60) (60) No. MP006-A-R-SD-2.1 TITLE SOT236-A-Reel No. MP006-A-R-SD-2.1 ANGLE QTY UNIT mm ABLIC Inc. 3,000 1.570.03 6 1 5 4 2 3 +0.05 0.08 -0.02 0.5 0.480.02 0.20.05 No. PG006-A-P-SD-2.1 TITLE SNT-6A-A-PKG Dimensions No. PG006-A-P-SD-2.1 ANGLE UNIT mm ABLIC Inc. +0.1 o1.5 -0 4.00.1 2.00.05 0.250.05 +0.1 1.850.05 o0.5 -0 4.00.1 0.650.05 3 2 1 4 5 6 Feed direction No. PG006-A-C-SD-2.0 TITLE SNT-6A-A-Carrier Tape No. PG006-A-C-SD-2.0 ANGLE UNIT mm ABLIC Inc. 12.5max. 9.00.3 Enlarged drawing in the central part o130.2 (60) (60) No. PG006-A-R-SD-1.0 SNT-6A-A-Reel TITLE No. PG006-A-R-SD-1.0 ANGLE QTY. UNIT mm ABLIC Inc. 5,000 0.52 1.36 2 0.52 0.2 0.3 1. 2. 1 (0.25 mm min. / 0.30 mm typ.) (1.30 mm ~ 1.40 mm) 0.03 mm SNT 1. Pay attention to the land pattern width (0.25 mm min. / 0.30 mm typ.). 2. Do not widen the land pattern to the center of the package ( 1.30 mm ~ 1.40 mm ). Caution 1. Do not do silkscreen printing and solder printing under the mold resin of the package. 2. The thickness of the solder resist on the wire pattern under the package should be 0.03 mm or less from the land pattern surface. 3. Match the mask aperture size and aperture position with the land pattern. 4. Refer to "SNT Package User's Guide" for details. 1. 2. (0.25 mm min. / 0.30 mm typ.) (1.30 mm ~ 1.40 mm) No. PG006-A-L-SD-4.1 TITLE SNT-6A-A -Land Recommendation No. PG006-A-L-SD-4.1 ANGLE UNIT mm ABLIC Inc. Disclaimers (Handling Precautions) 1. All the information described herein (product data, specifications, figures, tables, programs, algorithms and application circuit examples, etc.) is current as of publishing date of this document and is subject to change without notice. 2. The circuit examples and the usages described herein are for reference only, and do not guarantee the success of any specific mass-production design. ABLIC Inc. is not responsible for damages caused by the reasons other than the products described herein (hereinafter "the products") or infringement of third-party intellectual property right and any other right due to the use of the information described herein. 3. ABLIC Inc. is not responsible for damages caused by the incorrect information described herein. 4. Be careful to use the products within their specified ranges. Pay special attention to the absolute maximum ratings, operation voltage range and electrical characteristics, etc. ABLIC Inc. is not responsible for damages caused by failures and / or accidents, etc. that occur due to the use of the products outside their specified ranges. 5. When using the products, confirm their applications, and the laws and regulations of the region or country where they are used and verify suitability, safety and other factors for the intended use. 6. When exporting the products, comply with the Foreign Exchange and Foreign Trade Act and all other export-related laws, and follow the required procedures. 7. The products must not be used or provided (exported) for the purposes of the development of weapons of mass destruction or military use. ABLIC Inc. is not responsible for any provision (export) to those whose purpose is to develop, manufacture, use or store nuclear, biological or chemical weapons, missiles, or other military use. 8. The products are not designed to be used as part of any device or equipment that may affect the human body, human life, or assets (such as medical equipment, disaster prevention systems, security systems, combustion control systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment, aviation equipment, aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle use or other uses. Do not apply the products to the above listed devices and equipments without prior written permission by ABLIC Inc. Especially, the products cannot be used for life support devices, devices implanted in the human body and devices that directly affect human life, etc. Prior consultation with our sales office is required when considering the above uses. ABLIC Inc. is not responsible for damages caused by unauthorized or unspecified use of our products. 9. Semiconductor products may fail or malfunction with some probability. The user of the products should therefore take responsibility to give thorough consideration to safety design including redundancy, fire spread prevention measures, and malfunction prevention to prevent accidents causing injury or death, fires and social damage, etc. that may ensue from the products' failure or malfunction. The entire system must be sufficiently evaluated and applied on customer's own responsibility. 10. The products are not designed to be radiation-proof. The necessary radiation measures should be taken in the product design by the customer depending on the intended use. 11. The products do not affect human health under normal use. However, they contain chemical substances and heavy metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips may be sharp. Be careful when handling these with the bare hands to prevent injuries, etc. 12. When disposing of the products, comply with the laws and ordinances of the country or region where they are used. 13. The information described herein contains copyright information and know-how of ABLIC Inc. The information described herein does not convey any license under any intellectual property rights or any other rights belonging to ABLIC Inc. or a third party. Reproduction or copying of the information from this document or any part of this document described herein for the purpose of disclosing it to a third-party without the express permission of ABLIC Inc. is strictly prohibited. 14. For more details on the information described herein, contact our sales office. 2.0-2018.01 www.ablicinc.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Seiko Instruments: S-5842AAAAF-M6T1S S-5842ABAAA-I6T1U S-5842ABAAC-I6T1U