3M™Sorbents
For Maintenance, Petroleum, and Chemicals
3Innovation
3M™Sorbents Are Versatile And Effective
3M sorbents can be used in a wide variety of applications
ranging from simple maintenance to emergency spill clean-
up. Our sorbents are designed to be used for specific jobs
and materials. Some can be used for general maintenance
applications while others are designed to handle petroleum
or chemical spills and cleanup.
This brochure will provide an overview and some details
on each of our sorbents. It is divided into three main
sections, with gray for maintenance sorbents, red for
petroleum sorbents and yellow for chemical sorbents.
Ordering Information starts on page 18. On page 17 we
detail ways in which sorbent costs can be reduced. For
Customer Service, please call 1-800-328-1667 or visit
our web site at www.3M.com/occsafety.
Contents
3M™Maintenance Sorbents, General. . . . . . . . . . . . . . . . . 1
3M™Maintenance Sorbent Folded, High Capacity. . . . . . . 2
3M™Maintenance Sorbent Pads, High Capacity . . . . . . . . 3
3M™Maintenance Sorbent Rolls, High Capacity . . . . . . . 3
3M™Maintenance Sorbent Mini-Booms . . . . . . . . . . . . . . 3
3M™Maintenance Sorbent Pillow . . . . . . . . . . . . . . . . . . 3
3M™Maintenance Sorbent Drum Cover . . . . . . . . . . . . . . 4
3M™Maintenance Sorbent Rugs . . . . . . . . . . . . . . . . . . . 4
Cost Comparison: 3M™Sorbents vs Clay Granules . . . . . 4
3M™Petroleum Sorbents, General . . . . . . . . . . . . . . . . . . 5
3M™Petroleum Sorbent Folded, High Capacity . . . . . . . . 6
3M™Petroleum Sorbent Pads, High Capacity . . . . . . . . . . 7
3M™Petroleum Sorbent Rolls, High Capacity . . . . . . . . . 7
3M™Petroleum Sorbent Mini-Booms . . . . . . . . . . . . . . . . 7
3M™Petroleum Sorbent Mini-Pillow . . . . . . . . . . . . . . . . .8
3M™Petroleum Sorbent Drum Cover, High Capacity . . . . 8
3M™Petroleum Sorbent Pads . . . . . . . . . . . . . . . . . . . . . . 8
3M™Petroleum Sorbent Rolls . . . . . . . . . . . . . . . . . . . . . 8
3M™Petroleum Sorbent Boom . . . . . . . . . . . . . . . . . . . . . 9
3M™Petroleum Sorbent Double Boom . . . . . . . . . . . . . . . 9
3M™Petroleum Sorbent Sweep . . . . . . . . . . . . . . . . . . . . 9
3M™Petroleum Sorbent Pillow . . . . . . . . . . . . . . . . . . . . 9
3M™Petroleum Sorbent Particulate . . . . . . . . . . . . . . . . 10
3M™Petroleum Sorbent Static Resistant Pads,
High Capacity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3M™Petroleum Sorbent Static Resistant Roll,
High Capacity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3M™Chemical Sorbents, General . . . . . . . . . . . . . . . . . . 11
3M™Chemical Sorbent Folded, High Capacity . . . . . . . . 12
3M™Chemical Sorbent Pads, High Capacity . . . . . . . . . 13
3M™Chemical Sorbent Rolls, High Capacity . . . . . . . . . 13
3M™Chemical Sorbent Mini-Booms . . . . . . . . . . . . . . . 13
3M™Chemical Sorbent Pillow . . . . . . . . . . . . . . . . . . . . 13
3M™Chemical Sorbent Pads . . . . . . . . . . . . . . . . . . . . . 14
3M™Chemical Sorbent Rolls . . . . . . . . . . . . . . . . . . . . . 14
3M™Chemical Sorbent Particulate . . . . . . . . . . . . . . . . . 14
3M™Chemical Sorbent Spill Kits and Response Pack . . 15
3M™Petroleum Sorbent Spill Kits and Response Pack . . 16
10 Ways To Reduce Sorbent Costs . . . . . . . . . . . . . . . . 17
3M™Sorbent Ordering Information . . . . . . . . . . . . . . 18-24
Warning/Caution. . . . . . . . . . . . . . . . . . . . . . . . Back Cover
Symbol Key
Throughout this brochure you’ll notice the symbols shown
below. These symbols indicate which sorbents can and
cannot be used with different fluids.
= For use with petroleum-based products
= For use with water-based products
= For use with chemical-based products
= Not for use with
34446
1
3M™Maintenance Sorbents
3M™Maintenance Sorbents
are designed to absorb
non-aggressive liquids*,
making them ideal for
plant maintenance. They’re
lightweight and versatile
and take just minutes to
put in place. Maintenance
sorbents are dust-free and
contain no abrasive
granules that can damage
expensive equipment.
3M sorbents can also be
incinerated or fuel blended,
leaving less than 0.2% ash.
3M sorbents can be wrung
out and reused numerous
times with virtually no loss
of sorbent capacity. 3M
offers configurations that
allow you to get at the
source of a leak before it
becomes a bigger problem.
A gray color allows the
sorbent to blend into
plant appearance. As
maintenance sorbents
become saturated, they
take on a darker gray color,
making the user aware
that they are ready to be
changed while retaining
a clean appearance.
•Industrial machinery
leaks, drips, spills and
splashes of non-aggres-
sive maintenance fluids
•Wiping down oily tools
and equipment
•Tabletops and under work
surfaces
•Indoor vehicle/equipment
parking areas—fork
trucks, compressors,
and lift equipment
•Areas where an oily mist
is problematic
•Under oily machined
metal parts while they
drip off prior to packing
and shipping
•Sorbent Folded
•Sorbent Pads
•Sorbent Rolls
•Sorbent Mini-Booms
•Sorbent Pillows
•Sorbent Rugs
•Sorbent Drum Covers
A Complete Range of Products Includes: Suggested Applications
*Non-aggressive liquids are those used in daily operations which do not
require the use of personal protective equipment, and include: oils,
coolants, cutting fluids, aqueous-based liquids and
petroleum-based products.
34305
44852
2
3M™Maintenance Sorbent Folded M-FL550DD, High Capacity
3M™Maintenance Sorbent Folded M-FL550DD, High
Capacity is the easy-to-use solution for cleaning up spills,
drips and fluid leaks. You get four sorbent configurations
from one folded sorbent dispenser box. 3M Maintenance
Sorbent Folded offers:
•Four sorbents in one. It can be used as a boom, pillow,
pad, or roll, which means you stock one product to meet
your sorbent needs.
•Perforations every 16 inches allow you to select the
length required, so there’s less wasted sorbent.
•A handy dispenser box for easy, on-site use.
•3M’s high capacity sorbent technology:
a) has increased fluid-holding capacity which means
less sorbent used
b) allows for simple reclamation for recycling of valuable
liquids and re-use
of sorbent
c) minimizes sorbent
waste for disposal
•Each individual dispenser
contains suggestions for
sorbent use.
Application Guide
Carry Tear Unopened Around Corner Unfold Open
3M™Maintenance Sorbents
34294
6581
44850 44858 44860 44849 44859 44856
3
3M™Maintenance Sorbents
3M™Maintenance Sorbent Pads, High Capacity
Standard pads are highly
absorbent and nongranular,
with a low-profile design
that is perfect for placing
in, under, and around
machines to catch drips.
M-PD1520DD
Production pads are twice
as thick for extra absorbency.
They are ideal for tight areas,
cleaning up small spills, and
wiping down oily tools and
equipment. Designed to be
placed on machinery to
catch leaks at the source,
production pads eliminate the need to clean machines and
floors. Ideal for use in drip pans.
M-PD720GG
3M™Maintenance Sorbent Rolls, High Capacity
Designed to cover large surfaces, rolls can be easily cut to
fit tight corners. They are available in three convenient
widths—15, 33, and 38 inches—perfect for lining drawers,
covering workbenches, or masking larger areas from mists
and oversprays. Rolls of sorbent material are used to cover
and sorb large spills, or in areas where spills may occur.
Convenient in that they can be cut to the desired length,
they are also the most economical way to purchase sorbent.
M-RL15150DD
3M™Maintenance Sorbent Mini-Booms
Available in three lengths, mini-booms are ideal for
placing around equipment to contain spills and to prevent
leaks from spreading to adjacent work areas. A 3 inch
diameter scrim on the outside of a mini-boom identifies
the use while containing particulate sorbent material
designed for that application.
M-MB304
3M™Maintenance Sorbent Pillow, M-PL715
Small and lightweight, pillows are tear-resistant and feature a high capacity for holding
liquid. They can be placed quickly at the source of a leak, helping to save hours of cleanup
time. Sorbent pillows are ideal for use in a drip pan, under equipment, or at the source of
a large leak.
M-MB312
M-MB308
M-RL38150DDM-RL33150DD
6582 6583
6586 6580 6588
6592 6593 6594
6587
4
3M™Maintenance Sorbent Drum Cover M-DC22DD
The 3M™Maintenance Sorbent Drum Cover M-DC22DD High Capacity is designed to be
used on a 55 gallon drum to catch drips and spills that occur during the dispensing of all
types of non-aggressive materials used in daily operations. With cut-outs for dispensing
bungs and a skirt which fits neatly around the base of the drum to catch any drips that
would normally end up on the floor, the 3M Sorbent Drum Cover is the most versatile
on the market.
3M™Maintenance Sorbents
3M™Maintenance Sorbent Rugs
Sorbent rugs are used in areas where foot and vehicle
traffic is an issue. Designed to absorb liquids while
enduring the punishment of being tread upon, sorbent rugs
are durable and versatile. The 3M™Maintenance Sorbent
Rug M-RG36300E is a non-selective sorbent which will
“sorb” most non-aggressive liquids and is designed for use
in industrial maintenance applications. The 3M™Maintenance
Sorbent Rug M-RGC36100E with Coating can be used on
a clean and smooth floor to ensure the material does not
slip when walked on. The coating also acts as a fluid barrier,
protecting the surface below the rug.
M-RG36300E M-RGC36100E
Cost Comparison: 3M™Sorbents vs. Clay Granules
2/3 case M-PD1520DD (66 pads)
1 case will absorb approximately
37.5 gallons
(1 case = 100 pads)
Materials
5.7 - 50 lb. bags
1 - 50 lb. bag will absorb
approximately 4.4 gallons
6.7 lbs. sorbent + 182.5 lbs. oil = 189.2 lbs.
189.2 lbs. at 6 lbs. per minute
clean-up = 32 minutes of worker time
Labor
285 lbs. clay + 182.5 lbs. oil = 467.5 lbs.
467.5 lbs. at 2 lbs. per minute
clean-up = 234 minutes (plus breaks) of worker time
0.5 drum to hold sorbent and fluid for disposal
Drums and Disposal
1.6 drums to hold clay granules
and fluid for disposal
Calculations are estimated for cleaning up 25 gallons of fluid.
3M sorbent capacities are based on 3M laboratory data. Clay
granule data was obtained from the Sorptive Mineral Institute.
Labor savings are based on data collected by 3M and a major
U.S. manufacturer and reflect an expected labor savings in
most operations.
7063
6584 6585
44853
3884
3883 3888
44854
44855
5
3M™Petroleum Sorbents
•Controlling, cleaning up
and recovering oil and
petroleum based liquids
from effluent discharge,
streams, ponds, lakes,
rivers, and other bodies
of water
•In-plant spills under leak-
ing equipment and
machinery in place of clay
granules
•In drains and sumps
to collect petroleum
products from runoff
•Sorbent Folded
•Sorbent Pads
•Sorbent Mini-Booms
•Sorbent Mini-Pillows
•Sorbent Booms
•Sorbent Sweeps
•Sorbent Drum Covers
•Sorbent Particulate
A Complete Range of Products Includes: Suggested Applications
In service for over 20 years,
3M™Petroleum Sorbents
are used extensively for
controlling, cleaning up,
and recovering oil and
petroleum-based liquids
from effluent discharge,
streams, ponds, lakes,
rivers, and other bodies of
water. They are also used
for in-plant spills under
leaking equipment and
machinery. 3M petroleum
sorbents are dust-free and
contain no abrasive
granules that can damage
expensive equipment.
That’s because they’re
made from an innovative
microfiber material which
contains millions of tiny
pockets that are able to
absorb and hold petroleum-
based liquids.
3M petroleum sorbents
allow you to reclaim the
oil for easy recycling and
re-use. There’s less volume
for disposal after the fluid
is removed. What’s more,
3M petroleum sorbents can
be incinerated—with only
.02% ash residue.
•Repels water
while absorbing
petroleum-based liquids
•Does not deteriorate,
disintegrate, or sink
•Can be wrung out and
reused or disposed of
by incineration or fuel
blending in accordance
with local regulations
•Resists temperature and
humidity extremes
Features/Benefits
3808
3882
6
3M™Petroleum Sorbent Folded P-FL550DD, High Capacity
Folded sorbents are the easy-to-use solution for cleaning
spills, drips and fluid leaks. You get four sorbent configura-
tions from one folded sorbent dispenser box. 3M Petroleum
Sorbent Folded also offers:
•Four sorbents in one. It can be used as a boom, pillow,
pad, or roll, which means you stock fewer products to
meet your sorbent needs.
•Perforations every 16 inches allow you to select the
length required, so there’s less wasted sorbent.
•High water repellency:
- Saves money as oil, not water is recovered.
- Can be used outside as well as in-plant.
•A handy dispenser box for easy, on-site use.
•3M’s high volume sorbent technology:
a) has increased fluid-holding capacity which means
less sorbent is used
b) allows for simple
reclamation for
recycling of
valuable liquids
c) minimizes sorbent
waste for disposal
•Each individual dispenser
contains suggestions for
sorbent use.
Application Guide
Carry Tear Unopened Around Corner Unfold Open
3M™Petroleum Sorbents
3812
6712
7
3M™Petroleum Sorbents
3M™Petroleum Sorbent Pads, High Capacity
Conveniently sized, pads allow the user to quickly spread
sorbent on and in the path of a spill. Pads may also be used
on a work surface in anticipation of a spill, or as a wipe.
The 3M™Petroleum Sorbent Pads are a selective sorbent
which will “sorb” hydrocarbon-based liquids (oleophilic)
and repel aqueous-based liquids (hydrophobic). High
capacity sorbents have a scrim on one side to increase
strength and eliminate linting.
HP-156 HP-157 (Actual size 34" x 38")
3M™Petroleum Sorbent Mini-Booms
The 3M™Petroleum Sorbent Mini-Booms are a selective
sorbent which will “sorb” hydrocarbon-based liquids
(oleophilic) and repel aqueous-based liquids
(hydrophobic). Mini-booms are typically used because
of their tube-like shape to encircle spills and contain
leaks. A 3 inch diameter scrim on the outside of a mini-
boom identifies the use while containing particulate sor-
bent material designed for that application.
T-4
3M™Petroleum Sorbent Roll HP-100, High Capacity
Designed to cover large areas, petroleum sorbent rolls are perfect for lining drawers,
covering workbenches, or masking areas from oversprays. HP-100 rolls can be cut to
cover small areas or can be laid on open waters, shorelines, or discharge streams. One
bale of HP-100 petroleum sorbent material will absorb up to 73 gallons of petroleum-based
liquid. With a scrim on one side, HP-100 can be wrung out and reused many times over to
reduce waste and reclaim fluids.
HP-255 and HP-256
Twice as thick as a standard pad, these petroleum sorbent
pads offer high capacity in a low-profile design. That
means you can get extra sorbency into tight areas. They
can be placed directly on machinery or tucked in and
around machines to catch and contain leaking lubricants.
These pads can also be used to wipe contaminated
surfaces. As with the HP-156 and HP-157, they absorb
petroleum-based liquids and repel water.
HP-255 HP-256
T-12T-8
6756 6754
6755 6757
6723 6724 7068
6758
8
3M™Petroleum Sorbents
3M™Petroleum Sorbent Mini-Pillow T-30
Pillows are designed with a scrim that encases particulate sorbent material. Pillows are
small, lightweight, and tear-resistant, and can be used in areas where more capacity is
desired than can easily be achieved using a sorbent pad. The 3M™Petroleum Sorbent
Mini-Pillow is a selective sorbent which will “sorb” hydrocarbon-based liquids (oleophilic)
and repel aqueous-based liquids (hydrophobic).
3M™Petroleum Sorbent Drum Cover P-DC22DD, High Capacity
The 3M™Petroleum Sorbent Drum Cover P-DC22DD is designed for use on a 55-gallon
drum to catch drips and spills that occur during the dispensing of hydrocarbon materials.
With cut-outs for dispensing bungs and a skirt which fits neatly around the base of the
drum to catch drips that would normally end up on the floor, the 3M Drum Cover is the
most versatile on the market. The 3M™Petroleum Sorbent Drum Cover is a selective
sorbent which will “sorb” hydrocarbon-based liquids (oleophilic) and repel aqueous-based
liquids (hydrophobic), allowing them to be used in outdoor areas where drums may be
exposed to the elements. High capacity sorbents have a scrim on one side to increase
strength and eliminate linting.
3M™Petroleum Sorbent Pads
The 3M™Petroleum Sorbent Pad T-151 is a selective sor-
bent which will “sorb” hydrocarbon-based liquids
(oleophilic) and repel aqueous-based liquids (hydrophobic).
Each bale of T-151 pads absorbs 43.5 gallons, contains
200 pads that are 17 inches by 19 inches, and weighs 20
pounds. Conveniently sized, pads will allow the user to
quickly spread sorbent on and in the path of a thin spill.
T-151 pads are half as thick as the T-156 pad, making them
an excellent wipe for petroleum-based liquids of all types.
The T-156 and T-157 sorbent pads are extremely easy to
apply, retrieve, and reuse. Pads are recommended for con-
gested areas such as under docks, in shallow water, rocky
shorelines, marshes, and beaches. Pads can also be used to
wipe off oil-contaminated rocks, boats, and equipment.
Like rolls, they are ideal for in-plant use in place of
clay granules.
T-151 T-156
T-157 (Actual size 34" x 38")
3M™Petroleum Sorbent Rolls
These rolls can be used on all sizes of spills and discharges.
They can be cut to cover small areas or laid directly on open
waters, shorelines, or discharge streams. In addition, they can
be placed on docks, in boats, and under leaking machines.
T-100 T-190
6722
7069
6714 6715
6716
6711 6717
9
3M™Petroleum Sorbents
3M™Petroleum Sorbent Boom T-270
These booms can be linked together by built-in connectors to overlap and deploy over
large areas. Designed for long-term deployment, they are recommended for controlling
and absorbing spills and effluent discharges in ditches, streams, rivers, lakes, and terminal
docks and piers. They are UV resistant, will not deteriorate or disintegrate and have an
inner scrim to eliminate linting. Unlike non-sorbent containment booms, these booms
absorb the oil as they aid in containing it.
3M™Petroleum Sorbent Double Boom T-280
This double boom features a unique double-cylinder design to maximize absorption and
minimize the escape of traces of oil in flowing water. It also is constructed more rigidly
to facilitate handling in those hard-to-get at areas and to make it easier to turn over for
full saturation.
3M™Petroleum Sorbent Sweep T-126
These sweeps are excellent for sweeping thin slicks on water where mechanical skimmers
fail. Constructed with a durable rope encased in reinforced sorbent material, these sweeps
facilitate sweeping action over large surface areas. Sweeps can also be placed downstream
from booms to recover any escaping traces of oil.
3M™Petroleum Sorbent Pillow T-240
The 3M™Petroleum Sorbent Pillow T-240 is a selective sorbent which will “sorb”
hydrocarbon-based liquids (oleophilic) and repel aqueous-based liquids (hydrophobic).
These open mesh bags of particulate sorbent are excellent for handling large quantities
of light oil in confined spaces such as sumps, catch basins, bilges, or settlement ponds.
Designed for long term use, they are UV resistant and will not deteriorate or sink.
6720
6721
6713
6719
10
3M™Petroleum Sorbents
3M™Petroleum Sorbent Particulate T-210
The 3M™Petroleum Sorbent Particulate T-210 is a selective sorbent which will “sorb”
hydrocarbon-based liquids (oleophilic) and repel aqueous-based liquids (hydrophobic).
Particulate materials are used in packaging applications where breakage of a container
could cause a release of a petroleum product. Particulate is also useful when combined
with a wire fence as a barrier to filter out oils and other hazardous liquids in flowing
water. It can be used for manual placement or for mechanical blowing in open areas
on large spills.
3M™Petroleum Sorbent Static Resistant Pads, High Capacity
3M Static Resistant Petroleum Sorbents are specifically
designed to be used for the safe cleanup of highly flammable
petroleum-based liquids. They are specially treated to
resist static charge build-up and can be used effectively
and efficiently when conditions are likely to produce static
arcing—such as when relative humidity is low (below 20%)
or when temperatures fall below freezing.
3M Static Resistant Petroleum Sorbents absorb up to twice
as much oil and flammable liquid by weight as standard
melt-blown static resistant sorbents—on land and on water.
This results in less sorbent waste, lower cleanup costs, and
less time spent cleaning up spills.
HP-556 HP-557 (Actual size 34" x 38")
3M™Petroleum Sorbent Static Resistant Roll HP-500, High Capacity
3M Static Resistant Petroleum Sorbents are specifically designed to be used for the safe
cleanup of highly flammable petroleum-based liquids. They are specially treated to resist
static charge build-up and can be used effectively and efficiently when conditions are
likely to produce static arcing—such as when relative humidity is low (below 20%) or
when temperatures fall below freezing.
3M Static Resistant Petroleum Sorbents absorb up to twice as much oil and flammable
liquid by weight as standard melt-blown static resistant sorbents—on land and on water.
This results in less sorbent waste, lower cleanup costs, and less time spent cleaning
up spills.
3M™Petroleum Sorbents Static Resistant
6718
6760 6761
6759
11
3M™Chemical Sorbents
•Cleaning up hazardous
chemical spills, drips,
and leaks
•Ideal for rapid response
containment and cleanup
•Hazardous material
shipping
•Cover bench tops in
anticipation of a spill
•Wiping up contaminated
areas
•Sorbent Folded
•Sorbent Pads
•Sorbent Rolls
•Sorbent Mini-Booms
•Sorbent Pillows
•Sorbent Particulate
A Complete Range of Products Includes: Suggested Applications
3M™ Chemical Sorbents
are powerful enough to
handle acids (including
hydrofluoric acid), bases,
coolants and most other
hazardous fluids. They are a
safer choice because they
resist reactions with most
hazardous chemicals. They
will also absorb petroleum-
based fluids, non-aggressive
chemicals and aqueous
based solutions, reducing
the need to stock several
different sorbent types for
emergency response.
34319
3766
12
3M™Chemical Sorbent Folded C-FL550DD, High Capacity
Folded sorbents are the easy-to-use solution for emergency
response situations. That’s because they’re actually four
sorbent configurations in one folded sorbent dispenser box.
3M Chemical Sorbent Folded also offers:
•Four sorbents in one. It can be used as a boom, pillow,
pad, or roll, allowing you to stock just one product for
emergency response.
•Perforations every 16 inches—allow you to select the
length you need, so there will be less wasted sorbent.
•Made from chemically inert polypropylene material—
recommended for use with chemicals such as acids and
bases as well as aqueous- or hydrocarbon-based fluids.
•Comes in a handy dispenser box for easy, on-site storage
and improved response time.
•Uses 3M’s high-capacity sorbent technology—increased
fluid-holding capacity which means less sorbent is used
and there’s less sorbent
waste for disposal.
•Includes directions for
sorbent use right on
the box.
Application Guide
Carry Tear Unopened Around Corner Unfold Open
3M™Chemical Sorbents
34306
6564
13
3M™Chemical Sorbents
3M™Chemical Sorbent Pads C-PD914DD, High Capacity
Highly absorbent and non-granular, pads feature a low-profile design, so they can be easily
placed in tight areas. These pads are ideal for cleaning up small spills and wiping down
contaminated areas. Twenty-five pads per dispenser box.
3M™Chemical Sorbent Rolls, High Capacity
Designed to cover large surfaces, rolls can be easily cut
to cover small areas or fit tight corners. They can be used
to cover bench tops in anticipation of a spill while also
acting as a work surface. They are available in two
convenient widths—15 and 38 inches.
C-RL15150DD C-RL38150DD
3M™Chemical Sorbent Mini-Booms
Available in three lengths,
mini-booms are ideal for
placing around hazardous
liquid spills to prevent
them from spreading. They
work quickly, giving you
time to ensure proper
cleanup while minimizing
employee exposure. P-208 P-212P-200
3M™Chemical Sorbent Pillow P-300
Small, lightweight pillows feature a high capacity for holding liquid. They can be placed
quickly at the source of a leak or thrown into the contained spill, helping to save hours of
cleanup time.
6565
6566 6567
6574 6575 6576
6577
14
3M™Chemical Sorbents
3M™Chemical Sorbent Pads P-110
Chemical sorbent pads are designed with quick and easy response in mind. Pads are a
convenient 11 inches by 13 inches in size. Packaged in convenient dispenser boxes, they
can be stored in confined spaces or mounted on the wall near where spills may occur.
Fifty pads per dispenser box.
3M™Chemical Sorbent Rolls
Chemical sorbent rolls are
designed with quick and
easy response in mind.
Rolls come in 13, 19 and
38 inch widths, and each
are 100 feet long.
P-190 P-380P-130
3M™Chemical Sorbent Particulate P-500
Particulate materials are used in packaging applications where breakage of a container
could cause a release of a hazardous liquid. This material may also be sprinkled over a
spill or broadcast over a large area. The 3M™Chemical Sorbent Particulate P-500 is a
non-selective sorbent which will “sorb” most aggressive chemicals and is designed for
use in spill response applications.
6570
6571 6573 6578
6579
15
3M™Chemical Sorbent
Spill Kits and Response Pack
•3 rolls Chemroll
Chemical Sorbent
Folded per case.
•Each Chemroll is 5" x 26'
with perforations every
16" (19" x 26' fully
opened) and comes
complete with one
temporary disposal bag
and tie.
•2 rolls of Chemical
Sorbent Folded
(C-FL550DD); each
roll is 5" x 50' folded
(19" x 50' fully opened).
•30 Chemical Sorbent
Pads (C-PD1719DD);
each pad is 17" x 19".
•3 temporary disposal
bags and ties.
•1 yellow, 20-gallon
drum with lid and
plastic closure ring.
3M™ Chemical Sorbent
Folded Spill Kit C-SKFL5,
Chemroll, 5 Gallon
Contents
3M™ Chemical Sorbent
Folded Spill Kit C-SKFL31,
31 Gallon
Contents
Chemical folded sorbent spill kits are the perfect solution
for emergency response flexibility. With all of the features
of 3M folded sorbent, they can be used with most
hazardous liquids. The 3M™Chemroll 5-Gallon Spill Kit
is compact for easy storage—ideal for rapid response. It
can be squeezed and molded into confined areas such as
behind truck seats and in the trunks of cars. Encased in a
clear plastic shrink wrap, it resists damage from exposure.
Center dispense option allows you to use only the amount
you need, leaving the rest enclosed for future use. The
31-gallon spill kit is packed in an element-resistant
20-gallon drum which is color coded yellow for
easy identification.
3M™Chemical Sorbent Spill Response Pack SRP-Chem
The SRP-Chem is designed for use in laboratories, shipping docks or other areas where
hazardous chemicals are shipped, stored or transferred.
•Compact size for convenient storage.
•Ideal for spills up to 3.5 gallons.
•Contains 3 chemical sorbent mini-booms and 10 chemical sorbent pads.
•Includes poly bag for temporary storage of used sorbents.
•Use instructions included on inside of carrying case.
•Outside of carrying case functions as a warning sign.
6569 6568
6572
16
3M™Petroleum Sorbent
Spill Kits and Response Pack
•3 rolls Petroll Chemical
Sorbent Folded per case.
•Each Petroll is 15" x 26'
with perforations every
16" (19" x 26' fully
opened) and comes
complete with one
temporary disposal bag
and tie.
•2 rolls of Petroleum
Sorbent Folded
(P-FL550DD); each
roll is 5" x 50' folded
(19" x 50' fully opened).
•30 Petroleum Sorbent
Pads (HP-156); each pad
is 17" x 19".
•3 temporary disposal
bags and ties.
•1 white, 20-gallon
drum with lid and
plastic closure ring.
3M™ Petroleum Sorbent
Folded Spill Kit P-SKFL5,
Petroll, 5 Gallon
Contents
3M™ Petroleum Sorbent
Folded Spill Kit P-SKFL31,
31 Gallon
Contents
These folded sorbent spill kits combine all the features
of 3M folded sorbents in two convenient sizes of 5 and 31
gallons. The 3M™Petroll 5-Gallon Spill Kit is compact for
easy storage—ideal for rapid response. The 31-gallon spill
kit is packed in an element-resistant 20-gallon drum which
is color coded white for easy identification.
3M™Petroleum Sorbent Spill Response Pack SRP-Petro
The SRP-Petro is designed to quickly absorb and contain small petroleum spills and leaks.
•High absorbency; absorbs up to 4 gallons of petroleum based liquids.
•Compact size; convenient for trucks, shipping departments and for areas of oil transfer.
•Contains 3 mini-booms and 5 highly absorbent pads to clean up small spills.
•Includes poly bag for temporary storage of used sorbents.
•Use instructions included on inside of carrying case.
•Outside of carrying case functions as a warning sign.
6710 6709
6725
17
Choose an efficient sorbent. If you select a sorbent with
high capacity, you will use less; and there will be less
waste after use, reducing disposal costs.
A waste minimization and disposal cost reduction
program should include participation from purchasing,
user and environmental responsibilities to cover all PLD
(purchase + labor + disposal) factors. Consider the disposal
options up front. Can the sorbent be landfilled, incinerated,
or used in a waste-to-fuel burner?
Sorbent Selection
10 Ways To Reduce Sorbent Costs
Pick the right product for the application. To separate oil
from water, use a selective sorbent; also use a selective
sorbent to pick up oil outdoors where rain or other water
may be present. For other situations, to pick up both oil-
and water-based fluids, a non-selective sorbent is best.
Take a plant tour to identify the best sorbent product for the
job. Many convenient formats—rolls, pads, booms, pillows,
rugs and drum covers—are available to meet your needs.
Use a multi-format sorbent, such as 3M™Folded Sorbent,
to meet a variety of needs and save on inventory.
Identify Needs
Cutting to length or width needed avoids over use. Get the
cost benefit of purchasing in bulk rolls.
Use Dispensers
To get the benefit of efficient sorbents, it is necessary to
leave them in position longer. Let them work for you and
fewer changes will be necessary.
Use Sorbents to Full Capacity
Use a centrifuge to separate sorbed fluids for reclaiming
or recycling. Sorbents may be reusable. An EPA study has
demonstrated savings of 51% to 75% when sorbents are
reused from 2 to 8 times.
Separate Fluids
Waste disposal costs vary widely depending on the category
of the waste and the method of disposal. Disposal cost for a
55 gallon drum may range from approximately $120 for
landfilling of non-hazardous waste to $300 for burning for
fuel recovery to $800 for incineration. Don’t mix hazardous
and non-hazardous waste. As an example, mixing a small
amount of chlorinated solvent with a drum of recyclable
oils will classify the whole drum as hazardous waste and
greatly increase the disposal cost.
Identify Waste Streams
If a compressible sorbent is used, the volume of waste
can be reduced by compacting. Removal of fluids with a
wringer or centrifuge will give an initial reduction in
volume. A drum or trash compactor will reduce the volume
further. Since disposal costs are based primarily on volume,
significant savings may be achieved. In some areas mobile
extraction and compacting services are available.
Compress Waste
Costs associated with use of sorbent materials are often
underestimated and overlooked. Economical use can be as
simple as using sorbent on the equipment or at the source
of the leak before it spreads across the floor. User training
is essential to change attitudes and get buy-in for total
overall cost savings.
Training
Call your local 3M representative or the 3M technical
hot line at 1-800-243-4630 for help with product selection
and other cost-saving ideas. Your regional EPA office can
help you find the waste disposal service companies in
your area and help you select the most cost-effective
disposal method.
Use Resources
1
Selective vs. Non-Selective Sorbent
2
10
3
4
5
6
9
8
7
18
3M™Sorbent Ordering Information
Prod Code Approximate Dimension Product
Photo
Shipping Wts
& Measures Packaging
See Details
on pageUPC and Stock ID Nos. Sorbent Capacity
Maintenance Sorbent Folded, High Capacity
M-FL550DD 5" x 50' /Box
31.5 Gallons/Case
L: 20.63 in
W: 15.62 in
H: 20.25 in
Wt: 18 lb
Cube: 3.77 ft3
3 Boxes Per Case 2
50051138 29071 4
70-0704-0791-4
Maintenance Sorbent Production Pads, High Capacity
M-PD720GG 7 1/2" x 20 1/2" Production
Pad
31.5 Gallons/Case
L: 21 in
W: 16 in
H: 21 in
Wt: 12.6 lb
Cube: 4.082 ft3
100/Case 3
50051138 28994 7
70-0704-0587-6
Maintenance Sorbent Pads, High Capacity
M-PD1520DD 15 1/2" x 20 1/2" Pad
37.5 Gallons/Case
L: 21 in
W: 16 in
H: 21 in
Wt: 11.75 lb
Cube: 4.082 ft3
100/Case 3
50051138 28995 4
70-0704-0588-4
Maintenance Sorbent Rolls, High Capacity
M-RL15150DD 15 1/2" x 150' Roll
31 Gallons/Bale
L: 16 in
W: 21 in
H: 21 in
Wt: 11.4 lb
Cube: 4.082 ft3
1/Case 3
50051138 28996 1
70-0704-0589-2
M-RL33150DD 33" x 150' Roll
66 Gallons/Bale
L: 21 in
W: 21 in
H: 34 in
Wt: 13 lb
Cube: 8.867 ft3
1/Case 3
50051138 29070 7
70-0704-0790-6
M-RL38150DD 38" x 150' Roll
76 Gallons/Case
L: 21 in
W: 21 in
H: 39 in
Wt: 25.9 lb
Cube: 8.867 ft3
1/Case 3
50051138 28997 8
70-0704-0590-0
Maintenance Sorbent Mini Booms
M-MB304 3" x 4' Mini Boom
12 Gallons/Case
L: 24 in
W: 16 in
H: 13.7 in
Wt: 12.6 lb
Cube: 3.041 ft3
12/Case 3
50051138 21526 7
70-0703-1355-9
*Actual product dimensions may be greater than indicated. Thickness may vary slightly during shipping and storage.
Lead time approximately 10 working days from date of order received to date of order shipped.
6581
6582
6583
6586
6580
6588
6592
19
*Actual product dimensions may be greater than indicated. Thickness may vary slightly during shipping and storage.
Lead time approximately 10 working days from date of order received to date of order shipped.
Prod Code Approximate Dimension Product
Photo
Shipping Wts
& Measures Packaging
See Details
on pageUPC and Stock ID Nos. Sorbent Capacity
Maintenance Sorbent Mini Booms
M-MB308 3" x 8" Mini Boom
12 Gallons/Case
L: 24 in
W: 16 in
H: 13.7 in
Wt: 12.6 lb
Cube: 3 ft3
6/Case 3
50051138 21527 4
70-0703-1356-7
M-MB312 3" x 12' Mini Boom
12 Gallons/Case
L: 24 in
W: 16 in
H: 13.7 in
Wt: 12.6 lb
Cube: 3.041 ft3
4/Case 3
50051138 21528 1
70-0703-1357-5
Maintenance Sorbent Pillow, High Capacity
M-PL715 7" x 15" Pillow
8 Gallons/Case
L: 18.1 in
W: 15 in
H: 12.2 in
Wt: 7.8 lb
Cube: 1.915 ft3
16/Case 3
50051138 21531 1
70-0703-1360-9
Maintenance Sorbent Drum Cover, High Capacity
M-DC22DD 22" Drum Cover w/Skirt. For
55 Gallon Drum
19 Gallons/Case
L: 26.5 in
W: 14 in
H: 9.8 in
Wt: 8 lb
Cube: 2.1 ft3
25/Case 4
50051138 28998 5
70-0704-0591-8
Maintenance Sorbent Rug
M-RG36300E 36" x 300' Rug
32 Gallons/Rug
L: 9 in
W: 9 in
H: 37 in
Wt: 55 lb
Cube: 1.734 ft3
1/Case 4
50051138 29002 8
70-0704-0624-7
Maintenance Sorbent Rug, Coated
M-RGC36100E 36" x 100' Rug w/Coating
10.5 Gallons/Rug
L: 18 in
W: 18 in
H: 37 in
Wt: 24 lb
Cube: 6.936 ft3
1/Case 4
00051138 29003 0
70-0704-0623-9
Petroleum Sorbent Folded, High Capacity
P-FL550DD 5" x 50' /Box
31.5 Gallons/Case
L: 20.63 in
W: 15.62 in
H: 20.25 in
Wt: 18 lb
Cube: 3.77 ft3
3 Boxes Per Case 6
50051138 29141 4
70-0704-0897-9
Petroleum Sorbent Pads, High Capacity
HP-156 17" x 19"
37.5 Gallons/Bale
L: 19.9 in
W: 17 in
H: 21 in
Wt: 11 lb
Cube: 4.108 ft3
100 Pads/Bale 7
5 00 51138 28911 4
70-0703-1732-9
HP-157 34" x 38"
75 Gallons/Bale
L: 38 in
W: 40 in
H: 13 in
Wt: 38 lb
Cube: 11.43 ft3
50 Pads/Bale 7
5 00 51138 29116 2
70-0704-0855-7
6593
6594
6587
7063
6584
6585
6712
6756
6754
20
Prod Code Approximate Dimension Product
Photo
Shipping Wts
& Measures Packaging
See Details
on pageUPC and Stock ID Nos. Sorbent Capacity
Petroleum Sorbent Pads, High Capacity
HP-255 17" x 19"
33 Gallons/Bale
L: 19 in
W: 17 in
H: 21 in
Wt: 11 lb
Cube: 3.922 ft3
50 Pads/Bale 7
50051138 21543 4
70-0703-1379-9
HP-256 17" x 19"
66 Gallons/Bale
L: 19.5 in
W: 17.5 in
H: 35 in
Wt: 20 lb
Cube: 6.908 ft3
100 Pads/Bale 7
50051138 21544 1
70-0703-1380-7
Petroleum Sorbent Roll, High Capacity
HP-100 38" x 144'
73 Gallons/Roll
L: 39 in
W: 21 in
H: 21 in
Wt: 20 lb
Cube: 9.953 ft3
1 Roll/Bale 7
0 00 51138 21542 2
70-0703-1378-1
Petroleum Sorbent Mini-Booms
T-4 3" Diameter x 4'
12 Gallons/Case
L: 24 in
W: 16 in
H: 13.7 in
Wt: 13 lb
Cube: 3.041 ft3
12 Mini-Booms/ Case 7
50051138 21354 6
70-0702-2136-4
T-8 3" Diameter x 8'
12 Gallons/Case
L: 24 in
W: 16 in
H: 13.7 in
Wt: 13 lb
Cube: 3.041 ft3
6 Mini-Booms/ Case 7
50051138 21355 3
70-0702-2137-2
T-12 3" Diameter x 12'
12 Gallons/Case
L: 24 in
W: 16 in
H: 13.7 in
Wt: 13 lb
Cube: 3.041 ft3
4 Mini-Booms/ Case 7
50051138 21356 0
70-0702-2138-0
Petroleum Sorbent Mini-Pillow
T-30 7" x 15"
8 Gallons/Case
L: 18.1 in
W: 15 in
H: 12.2 in
Wt: 7.3 lb
Cube: 1.915 ft3
16 Pillows/ Case 8
50051138 21545 8
70-0703-1396-3
Petroleum Sorbent Drum Cover, Petroleum Only
P-DC22DD 22" Drum Cover w/Skirt for
55 Gallon Drum
19 Gallons/Case
L: 26.5 in
W: 13.5 in
H: 9.13 in
Wt: 8 lb
Cube: 1.887 ft3
25/Case 8
5 00 51138 29234 3
70-0705-1594-8
*Actual product dimensions may be greater than indicated. Thickness may vary slightly during shipping and storage.
Lead time approximately 10 working days from date of order received to date of order shipped.
6755
6757
6758
6723
6724
7068
6722
7069
21
Prod Code Approximate Dimension Product
Photo
Shipping Wts
& Measures Packaging
See Details
on pageUPC and Stock ID Nos. Sorbent Capacity
Petroleum Sorbent Pads
T-151 17" x 19"
43.5 Gallons/Bale
L: 18.88 in
W: 18 in
H: 20.5 in
Wt: 20.75 lb
Cube: 4.027 ft3
200 Pads/Bale 8
50021200 16049 8
98-0711-0197-0
T-156 17" x 19"
40.5 Gallons/Bale
L: 19.5 in
W: 17.5 in
H: 20.5 in
Wt: 21.5 lb
Cube: 4.046 ft3
100 Pads/Bale 8
50021200 16050 4
98-0711-0198-8
T-157 34" x 38"
81 Gallons/Bale
L: 38.5 in
W: 36 in
H: 12 in
Wt: 40 lb
Cube: 9.624 ft3
50 Pads/Bale 8
50021200 16051 1
98-0711-0756-3
Petroleum Sorbent Rolls
T-100 38" x 144'
84 Gallons/Roll
L: 38.9 in
W: 24.4 in
H: 24.8 in
Wt: 40 lb
Cube: 13.62 ft3
1 Roll/Bale 8
0 00 21200 16047 9
98-0711-0191-3
T-190 19" x 144'
42 Gallons/Roll
L: 20 in
W: 21 in
H: 21 in
Wt: 20 lb
Cube: 5.102 ft3
1 Roll/Bale 8
0 00 51138 21648 1
70-0703-1602-4
Petroleum Sorbent Boom
T-270 8" Diameter x 10'
10 lbs./Boom
20 Gallons/Boom
L: 33 in
W: 22 in
H: 24 in
Wt: 55 lb
Cube: 10.08 ft3
4 Booms/ Bale 9
50021200 16054 2
98-0711-0633-4
Petroleum Sorbent Double Boom
T-280 4" Diameter x 10'
6.5 lbs./Double Boom
10 Gallons/Boom
L: 32 in
W: 20 in
H: 20 in
Wt: 27.5 lb
Cube: 7.399 ft3
4 Double Booms/ Bale 9
50021200 16085 6
98-0711-0807-4
Petroleum Sorbent Sweep
T-126 21" x 100'
25 Gallons/Sweep
L: 21 in
W: 17.5 in
H: 19.5 in
Wt: 15 lb
Cube: 4.146 ft3
1 Sweep/ Bale 9
00021200 16048 6
98-0711-0196-2
Petroleum Sorbent Pillow
T-240 5" x 14" x 25"
2.4 lbs./Pillow
3.5 Gallons/Pillow
L: 22 in
W: 18 in
H: 24 in
Wt: 27.5 lb
Cube: 5.499 ft3
10 Pillows/ Bale 9
50021200 16053 5
98-0711-0199-6
*Actual product dimensions may be greater than indicated. Thickness may vary slightly during shipping and storage.
Lead time approximately 10 working days from date of order received to date of order shipped.
6714
6715
6716
6711
6717
6720
6721
6713
6719
22
Prod Code Approximate Dimension Product
Photo
Shipping Wts
& Measures Packaging
See Details
on pageUPC and Stock ID Nos. Sorbent Capacity
Petroleum Sorbent Particulate
T-210 25 lbs./Bag
35 Gallons/Bag
L: 24 in
W: 22 in
H: 20 in
Wt: 27 lb
Cube: 6.107 ft3
1 Bag/ Bale 10
00021200 16052 3
98-0711-0412-3
Petroleum Sorbent Static Resistant Pads, High Capacity
HP-556 17" x 19"
37.5 Gallons/Bale
L: 19.9 in
W: 17 in
H: 21 in
Wt: 10 lb
Cube: 4.108 ft3
100 Pads/ Bale 10
50051138 29068 4
70-0704-0788-0
HP-557 34" x 38"
75 Gallons/Bale
L: 38 in
W: 40 in
H: 13 in
Wt: 22 lb
Cube: 11.43 ft3
50 Pads/ Bale 10
50051138 29069 1
70-0704-0789-8
Petroleum Sorbent Static Resistant Roll, High Capacity
HP-500 38" x 144'
73 Gallons/Roll
L: 39 in
W: 21 in
H: 21 in
Wt: 20 lb
Cube: 9.953 ft3
1 Roll/ Bale 10
50051138 29067 7
70-0704-0787-2
Chemical Sorbent Folded, High Capacity
C-FL550DD 5" x 50'
31.5 Gallons/Case
L: 21 in
W: 16 in
H: 21 in
Wt: 18 lb
Cube: 4.082 ft3
3 Boxes/ Case 12
50051138 29296 1
70-0705-1716-7
Chemical Sorbent Pads, High Capacity
C-PD914DD 9 1/4" x 14 1/2"
23.5 Gallons/Case
L: 20.62 in
W: 15.62 in
H: 20.25 in
Wt: 11.9 lb
Cube: 3.77 ft3
25 Pads per Dispenser Box
6 Boxes/ Case 13
50051138 29096 7
70-0704-0823-5
Chemical Sorbent Rolls, High Capacity
C-RL15150DD 15 1/4" x 150'
31 Gallons/Case
L: 21 in
W: 16 in
H: 21 in
Wt: 13.4 lb
Cube: 4.082 ft3
1 Roll Per Case 13
50051138 29097 4
70-0704-0824-3
C-RL38150DD 38" x 150'
76 Gallons/Case
L: 21 in
W: 21 in
H: 39 in
Wt: 27 lb
Cube: 9.95 ft3
1 Roll Per Case 13
50051138 29098 1
70-0704-0825-0
*Actual product dimensions may be greater than indicated. Thickness may vary slightly during shipping and storage.
Lead time approximately 10 working days from date of order received to date of order shipped.
6718
6760
6761
6759
6564
6565
6566
6567
23
Prod Code Approximate Dimension Product
Photo
Shipping Wts
& Measures Packaging
See Details
on pageUPC and Stock ID Nos. Sorbent Capacity
*Actual product dimensions may be greater than indicated. Thickness may vary slightly during shipping and storage.
Lead time approximately 10 working days from date of order received to date of order shipped.
Chemical Sorbent Mini-Booms
P-200 3" Diameter x 4'
12 Gallons/Case
L: 24 in
W: 16 in
H: 13.7 in
Wt: 12.7 lb
Cube: 3.041 ft3
12 Mini-Booms/ Case 13
50051138 17596 7
70-0701-8931-4
P-208 3" Diameter x 8'
12 Gallons/Case
L: 24 in
W: 16 in
H: 13.7 in
Wt: 13.3 lb
Cube: 3.041 ft3
6 Mini-Booms/ Case 13
50051138 21343 0
70-0702-2130-7
P-212 3" Diameter x 12'
12 Gallons/Case
L: 24 in
W: 16 in
H: 13.7 in
Wt: 12.8 lb
Cube: 3.041 ft3
4 Mini-Booms/ Case 13
50051138 21344 7
70-0702-2131-5
Chemical Sorbent Pillow
P-300 7" x 15"
8 Gallons/Case
L: 18.1 in
W: 15 in
H: 12.2 in
Wt: 7.75 lb
Cube: 1.915 ft3
16 Pillows/ Case 13
50051138 17597 4
70-0701-8932-2
Chemical Sorbent Pad
P-110 11" x 13"
17 Gallons/Case
L: 26.3 in
W: 12.6 in
H: 14.6 in
Wt: 14.3 lb
Cube: 2.797 ft3
50 Pads/Dispenser
4 Dispensers/Case 14
50051138 17593 6
70-0701-8928-0
Chemical Sorbent Rolls
P-130 13" x 100'
19 Gallons/Case
L: 27 in
W: 13.7 in
H: 14.1 in
Wt: 15 lb
Cube: 3.016 ft3
2 Rolls/ Case 14
50051138 17594 3
70-0701-8929-8
P-190 19" x 100'
28 Gallons/Case
L: 27 in
W: 13.7 in
H: 20.1 in
Wt: 22.7 lb
Cube: 4.3 ft3
2 Rolls/ Case 14
50051138 09095 6
70-0701-9163-3
P-380 38" x 100'
28 Gallons/Case
L: 14 in
W: 14 in
H: 39.25 in
Wt: 21.5 lb
Cube: 4.445 ft3
1 Roll/ Case 14
00051138 21345 9
70-0702-2132-3
Chemical Sorbent Particulate, Chopped
P-500 12 lbs. Chopped/Bag
14 Gallons/Bag
L: 16.8 in
W: 11.8 in
H: 21.7 in
Wt: 13.5 lb
Cube: 2.488 ft3
1 Bag/ Case 14
00051138 17598 6
70-0701-8933-0
Chemical Sorbent Folded Spill Kit, Chemroll, 5 Gallon
C-SKFL5 Chemroll
15 Gallons/Case
L: 15.5 in
W: 13.5 in
H: 13.5 in
Wt: 7.5 lb
Cube: 1.633 ft3
3 Rolls/Case 15
50051138 46288 3
70-0706-1181-2
6574
6575
6576
6577
6570
6571
6573
6578
6579
6569
24
Prod Code Approximate Dimension Product
Photo
Shipping Wts
& Measures Packaging
See Details
on pageUPC and Stock ID Nos. Sorbent Capacity
Chemical Sorbent Folded Spill Kit, 31 Gallon
C-SKFL31 31 Gallon Spill Kit
20 Gallon Drum
L: 22.5 in
W: 22.5 in
H: 18.5 in
Wt: 20 lb
Cube: 5.417 ft3
1 Kit 15
50051138 46287 6
70-0706-1180-4
Chemical Sorbent Spill Response Pack
SRP-Chem 10.5 Gallons/Case L: 21.4 in
W: 17.2 in
H: 13.6 in
Wt: 12.7 lb
Cube: 2.894 ft3
3 Packs/ Case 15
50051138 28910 7
70-0703-1718-8
Petroleum Sorbent Folded Spill Kit, Petroll, 5 Gallon
P-SKFL5 Petroll
15 Gallons/Case
L: 15.5 in
W: 13.5 in
H: 13.5 in
Wt: 7.5 lb
Cube: 1.633 ft3
3 Rolls/ Case 16
50051138 46289 0
70-0706-1182-0
Petroleum Sorbent Spill Kit, 31 Gallon
P-SKFL31 31 Gallon Spill Kit
20 Gallon Drum
L: 22.5 in
W: 22.5 in
H: 18.5 in
Wt: 20 lb
Cube: 5.417 ft3
1 Kit 16
50051138 46286 9
70-0706-1179-6
Petroleum Sorbent Spill Response Pack
SRP-Petro 12 Gallons/Case L: 21.4 in
W: 17.2 in
H: 13.6 in
Wt: 12.7 lb
3 Packs/ Case 16
50051138 28950 3
70-0703-1784-0
*Actual product dimensions may be greater than indicated. Thickness may vary slightly during shipping and storage.
Lead time approximately 10 working days from date of order received to date of order shipped.
6568
6572
6710
6709
6725 Cube: 2.894 ft3
Printed in USA
©3M, December 2003 70-0708-8969-9
Failure to properly handle
and dispose of sorbents
contaminated by hazardous
materials can result in serious
physical injury or death and/
or environmental harm. For
proper handling, consult the
Material Safety Data Sheet
for the material absorbed,
applicable safety and health
standards, contact your
supervisor, or call 3M at
1-800-243-4630. To reduce
the risk of serious physical
injury or death, always use
respiratory protection and
protective clothing
appropriate for handling the
material to be absorbed.
Transportation and disposal
of spent sorbents must
comply with all applicable
federal, state and local laws
and regulations.
Caution
Sorbents may become
slippery when used on
flooring. Do not walk on
sorbent or place in high
traffic areas.
WARNING
3
General Offices
3M Center
St. Paul, MN 55144-1000
3M Canada Company
OH&ES
P.O. Box 5757
London, Ontario N6A 4T1
Canada 10% Post-consumer waste paper.
In U.S., contact:
Technical Assistance
1-800-243-4630
Customer Service
1-800-328-1667
Fax On Demand
1-800-646-1655
Internet
www.3M.com/occsafety
Material Safety Data Sheets
(MSDS)
1-651-737-7222
In Canada, contact:
3M Canada Company,
OH&ESD
P.O. Box 5757
London, Ontario N6A 4T1
Technical Assistance
(Canada only)
1-800-267-4414
Sales Assistance
1-800-265-1840, ext. 6137
Fax On Demand
1-800-646-1655
Internet
www.3M.com/CA/occsafety
Outside U.S. and Canada:
Technical Assistance In Mexico
01-800-712-0646
5270-2255, 5270-2119
(Mexico City only)
Technical Assistance In Brazil
0800-132333
Fax On Demand
OUS Locations
1-651-732-6530
For other 3M products
1-800-3M-HELPS or
1-651-737-6501
For More Information
