Du line Dupline Wireless Base Unit Type G3486 0058 230 (R) Fieldbus Installationbus * Dupline transceiver for building automation applications * Easy to install in both old and new installations * Unlimited number of connected wireless switches G8x86 440x 703 * DIN-rail mounting * Range up to 100 m in open air * Easy to operate Product Description The G3486 0058 230 wireless base station is dedicated for G8x86 440x 703 wireless switches. The units communicate at 868 MHz. The base station is built into a standard H4 plastic housing. It should not be installed in a metal cabinet or other type of installation that might reduce the range. The wireless Base unit is Capable of controlling a unlimited number of wireless switches. The wireless system is built for smarthouse. Ordering key G 3486 0058 230 Type: Dupline(R) Housing Input type Channels Inputs Colour/Input type Supply Input Specifications General Specification * Wireless communication at 868 MHz. Power ON Delay Indication of Power ON Dupline(R) signal Wireless communication ON Association Disable RF Environment Protection degree Pollution degree Operating temperature Storage temperature Humidity (non-condensing) Mechanical resistance Shock Vibration Dimensions Material (see "Techical information") Weight Special conditions Supply Specifications Power supply AC types Rated operational voltage through term. 21 & 22 230 Frequency Voltage drop-out Rated operational power Power dissipation Rated impulse voltage 230 Dielectric voltage Supply - Dupline(R) Overvoltage cat. III (IEC60664) 230 VAC, 15% 45 to 65 Hz 40 ms Typ. 3 VA 3W 4 kV 4 kVAC (rms) Specifications are subject to change without notice (16.06.2006) Dupline(R) is a registered trademark. A product of the CARLO GAVAZZI Group Typ. 2 s Green LED Yellow LED Green LED Red LED Red LED IP 20 3 (IEC 60664) -20C to +50C (-4 to + 122F) -50C to +85C (-58 to +185F) 20 to 80% 15 G (11 ms) 2 G (6 to 55 Hz) 72 x 77 x 70 mm H4 housing 250 g The base should not be installed in shielded boxes such as metal or plated, as these will reduce the range to the associated units. 1 Du line (R) Fieldbus Installationbus Mode of operation The wireless G8x86 44xx 703 switches are programmed as standard Fuga/Opus switches (but with no channel coding for (I/O 5-8, as the leds automatically follow the buttons). The communication between the G8x86 44xx 703 wireless switch and the G3486 0058 230 base is established in the following way: The used Dupline adresses of wireless devices are all programmed at the wireless device. The only "special" interaction regarding wireless devices is the association process. This process makes sure that less device fails, alle leds will flash briefly after trying to communicate with the base unit three times. on both base units until both Association and disabled-leds are off. This indicates "normal operation". To associate a device with the base: 1) Press the "mode" button on the base. The association led lights up. 2) Press a button on the wireless device to be associated. - All leds on the device will light up for about 1 second. 3) Press the "mode" button on the base unit until both Association and disabled-leds are off. This indicates "normal operation". If a device associated with base A is in sight of bases A and B and you want to reassociate the device with base B, do the following: 1) Select the "Disabled" mode on base A. 2) Select the "Associate" mode on base B. 3) Press a button on the wireless device to be associated. - All leds on the device will light up for about 1 second. The LEDs: The "Power" LED indicates that the unit is powered. (230Vac) The "Dupline OK" LED indicates detected Dupline signal. The "RF" LED indicates received wireless communication directed to this base. The "Associate" LED indicates the association mode. The "Disabled" LED indicates that the base ignores any wireless communications. If the connection from a wire- 4) Press the "mode" button your wireless devices are not disturbed by the devices of your neighbour. Dupline(R) 12 12 G3800XXXX I1 I3 I2 I4 G34860058230 M 10 ax. 0 m G82864406703 Mode 868 MHz Power Dupline I1 I3 I2 I4 (R) RF Associate Disable G81864407703 2 Specifications are subject to change without notice (16.06.2006) Dupline(R) is a registered trademark. A product of the CARLO GAVAZZI Group