TD3043 Zero-Volt Switching Triac Driver DESCRIPTION The TD3043 consists of a single input LED optically coupled to a zero-volt crossing triac driver. The TD3043 provides high input-to-output isolation and is designed to drive high-powered triacs. Typical uses include interfacing logic level control signals to equipment powered from 110Vac and 220Vac lines. FEATURES APPLICATIONS x Zero-volt switching x Home appliances x 400V blocking voltage x Motor/Drive controls x High input-to-output isolation (5000 Vrms) x Solid state relays x High reliability x Solenoid/Valve control x Solenoids x Exercise equipment x Temperature Controls OPTIONS/SUFFIXES -TR MAXIMUM RATINGS 0.4" Lead Spacing Option x x -S Surface Mount Option x -H 0.4" Lead Spacing SCHEMATIC DIAGRAM 1. Anode 2. Cathode 3. NC 4. MAIN TERMINAL 5. SUBSTRATE DO NOT CONNECT 6. MAIN TERMINAL PARAMETER UNIT MIN TYP MAX Storage Temperature C -55 125 Operating Temperature C -40 85 Continuous Input Current mA 40 Transient Input Current mA 400 Reverse Input Control Voltage V 6 Total Power Dissipation mW 330 Soldering Temperature (10 seconds) C 260 APPROVALS x x rev 1.0 UL and C-UL Approved File #E201932 VDE Approved, License#40011225 Solid State Optronics, Inc. 1.888.377.4776 www.ssousa.com TD3043 Zero-Volt Switching Triac Driver ELECTRICAL CHARACTERISTICS - 25 PARAMETER UNIT MIN TYP MAX 1.2 1.5 TEST CONDITIONS INPUT SPECIFICATIONS LED Forward Voltage V LED Reverse Voltage V Reverse Leakage Current PA 6 12 If = 10mA Ir = 10uA 10 Vr=4V OUTPUT SPECIFICATIONS Blocking Voltage V Peak Blocking Current nA 60 500 V 1.8 3 Critical Rate of Rise V/ 400 Ps Io = 1uA VDRM=Rated ITM=100mA 600 COUPLED SPECIFICATIONS rev 1.0 Isolation Voltage V Trigger Current mA Inhibit Voltage V Isolation Resistance G: Holding Current P$ Leakage Current P$ 5000 T = 1 minute 5 5 Main Terminal Voltage=3V 20 IF=5mA 50 DC500V 100 1 IF=Rated, VDRM=Rated, Off State Solid State Optronics, Inc. 1.888.377.4776 www.ssousa.com TD3043 Zero-Volt Switching Triac Driver PERFORMANCE DATA VTM,ON-STATE VOLTAGE (VOLTS) Ta,AMBIENT TEMPERATURE (C) Ta,AMBIENT TEMPERATURE (C) rev 1.0 Ta,AMBIENT TEMPERATURE (C) Fig.5 Trigger Current versus Temperature IFT , NORMALIZED IDRM2 NORMALIZED Fig.4 IDRM2 ,Leakage in Inhibit State versus Temperature Fig.3 Leakage with LED Off versus Temperature IDRM1,PEAK BLOCKING CURRENT (nA) Fig.2 Inhibit Voltage versus Temperature VINH, NORMALIZED ITM,ON-STATE CURRENT (mA) Fig.1 On-State Characteristics Ta,AMBIENT TEMPERATURE (C) Solid State Optronics, Inc. 1.888.377.4776 www.ssousa.com TD3043 Zero-Volt Switching Triac Driver MECHANICAL DIMENSIONS 6 PIN DUAL IN-LINE PACKAGE (Through Hole) 0.4" Lead Spacing 6 PIN SURFACE MOUNT DEVICE (SMD) TOLERANCE :+ 0.25mm Unit in (mm) rev 1.0 Solid State Optronics, Inc. 1.888.377.4776 www.ssousa.com