CD4099BM/CD4099BC 8-Bit Addressable Latch General Description Features The CD4099B is an 8-bit addressable latch with three address inputs (A0-A2), an active low enable input (E), active high clear input (CL), a data input (D), and eight outputs (Q0 - Q7). Data is entered into a particular bit in the latch when that bit is addressed by the address inputs and the enable (E) is low. Data entry is inhibited when enable (E) is high. When clear (CL) and enable (E) are high, all outputs are low. When clear (CL) is high and enable (E) is low, the channel demultiplexing occurs. The bit that is addressed has an active output which follows the data input while all unaddressed bits are held low. When operating in the addressable latch mode (E e CL e low), changing more than one bit of the address could impose a transient wrong address. Therefore, this should only be done while in the memory mode (E e high, CL e low). Y Y Y Y Y Y Y Y Wide supply voltage range 3.0V to 15V High noise immunity 0.45 VDD (typ.) Low power TTL fan out of 2 driving 74L compatibility or 1 driving 74LS Serial to parallel capability Storage register capability Random (addressable) data entry Active high demultiplexing capability Common active high clear Connection Diagram CD4099B Dual-In-Line Package Order Number CD4099B TL/F/5984 - 1 Top View Truth Table Mode Selection E CL Addressed Latch L H L H L L H H Follows Data Holds Previous Data Follows Data Reset to ``0'' C1995 National Semiconductor Corporation TL/F/5984 Unaddressed Latch Mode Holds Previous Data Holds Previous Data Reset to ``0'' Reset to ``0'' Addressable Latch Memory Demultiplexer Clear RRD-B30M105/Printed in U. S. A. CD4099BM/CD4099BC 8-Bit Addressable Latch February 1988 Absolute Maximum Ratings (Notes 1 & 2) Recommended Operating Conditions (Note 2) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. DC Supply Voltage (VDD) Input Voltage (VIN) Storage Temperature Range (TS) Power Dissipation (PD) Dual-In-Line Small Outline Lead Temperature (TL) (Soldering, 10 seconds) DC Supply Voltage (VDD) Input Voltage (VIN) Operating Temperature Range (TA) CD4099BM CD4099BC b 0.5 to a 18 VDC b 0.5 to VDD a 0.5 VDC b 65 C to a 150 C 3.0 to 15 VDC 0 to VDD VDC b 55 C to a 125 C b 40 C to a 85 C 700 mW 500 mW 260 C DC Electrical Characteristics CD4099BM (Note 2) Symbol Parameter b 55 C Conditions Min IDD Quiescent Device Current VOL Low Level Output Voltage a 25 C Max VDD e 5V, VIN e VDD or VSS VDD e 10V, VIN e VDD or VSS VDD e 15V, VIN e VDD or VSS lIOl s 1 mA VDD e 5V VDD e 10V VDD e 15V Min a 125 C Min Units Typ Max Max 5.0 10 20 0.02 0.02 0.02 5.0 10 20 150 300 600 mA mA mA 0.05 0.05 0.05 0 0 0 0.05 0.05 0.05 0.05 0.05 0.05 V V V High Level Output Voltage lIOl s 1 mA VDD e 5V VDD e 10V VDD e 15V VIL Low Level Input Voltage VDD e 5V, VO e 0.5V or 4.5V VDD e 10V, VO e 1.0V or 9.0V VDD e 15V,VO e 1.5V or 13.5V VIH High Level Input Voltage VDD e 5V, VO e 0.5V or 4.5V VDD e 10V, VO e 1.0V or 9.0V VDD e 15V, VO e 1.5V or 13.5V 3.5 7.0 11.0 3.5 7.0 11.0 2.75 5.5 8.25 3.5 7.0 11.0 V V V IOL Low Level Output Current (Note 3) VDD e 5V, VO e 0.4V VDD e 10V, VO e 0.5V VDD e 15V, VO e 1.5V 0.64 1.6 4.2 0.51 1.3 3.4 0.88 2.25 8.8 0.36 0.9 2.4 mA mA mA IOH High Level Output VDD e 5V, VO e 4.6V Current (Note 3) VDD e 10V, VO e 9.5V VDD e 15V, VO e 13.5V b 0.64 b 1.6 b 4.2 b 0.51 b 1.3 b 3.4 b 0.88 b 2.25 b 8.8 b 0.36 b 0.9 b 2.4 mA mA mA IIN Input Current VOH 4.95 9.95 14.95 4.95 9.95 14.95 1.5 3.0 4.0 VDD e 15V, VIN e 0V VDD e 15V, VIN e 15V 5.0 10 15 2.25 4.5 6.75 4.95 9.95 14.95 V V V 1.5 3.0 4.0 1.5 3.0 4.0 b 0.10 b 10 b 5 b 0.10 b 1.0 0.10 10b5 0.10 1.0 V V V mA mA DC Electrical Characteristics CD4099BC (Note 2) Symbol Parameter b 40 C Conditions Min IDD Quiescent Device Current VDD e 5V, VIN e VDD or VSS VDD e 10V, VIN e VDD or VSS VDD e 15V, VIN e VDD or VSS VOL Low Level Output Voltage lIOl s 1mA VDD e 5V VDD e 10V VDD e 15V High Level Output Voltage lIOl s 1 mA VDD e 5V VDD e 10V VDD e 15V VIL Low Level Input Voltage VDD e 5V, VO e 0.5V or 4.5V VDD e 10V, VO e 1.0V or 9.0V VDD e 15V, VO e 1.5V or 13.5V VIH High Level Input Voltage VDD e 5V, VO e 0.5V or 4.5V VDD e 10V, VO e 1.0V or 9.0V VDD e 15V, VO e 1.5V or 13.5V VOH Max 20 40 80 0.02 0.02 0.02 20 40 80 150 300 600 mA mA mA 0.05 0.05 0.05 0 0 0 0.05 0.05 0.05 0.05 0.05 0.05 V V V 4.95 9.95 14.95 5 10 15 2.25 4.5 6.75 3.5 7.0 11.0 2.75 5.5 8.25 Min Units Max 1.5 3.0 4.0 3.5 7.0 11.0 a 85 C Typ 4.95 9.95 14.95 2 a 25 C Min Max 4.95 9.95 14.95 1.5 3.0 4.0 V V V 1.5 3.0 4.0 3.5 7.0 11.0 V V V V V V DC Electrical Characteristics CD4099BC (Note 2) (Continued) Symbol Parameter Conditions b 40 C Min IOL Low Level Output Current (Note 3) VDD e 5V, VO e 0.4V VDD e 10V, VO e 0.5V VDD e 15V, VO e 1.5V IOH High Level Output Current (Note 3) VDD e 5V, VO e 4.6V VDD e 10V, VO e 9.5V VDD e 15V, VO e 13.5V IIN Input Current VDD e 15V, VIN e 0V VDD e 15V, VIN e 15V Max a 25 C a 85 C Max Min Units Min Typ Max 0.52 1.3 3.6 0.44 1.1 3.0 0.88 2.25 8.8 0.36 0.9 2.4 mA mA mA b 0.52 b 1.3 b 3.6 b 0.44 b 1.1 b 3.0 b 0.88 b 2.25 b 8.8 b 0.36 b 0.9 b 2.4 mA mA mA b 0.30 b 10 b 5 b 0.30 b 1.0 0.30 10b5 0.30 1.0 mA mA AC Electrical Characteristics* TA e 25 C, CL e 50 pF, RL e 200k, Input tr e tf e 20 ns, unless otherwise noted Symbol Parameter Typ Max Units 200 75 50 400 150 100 ns ns ns VDD e 5V VDD e 10V VDD e 15V 200 80 60 400 160 120 ns ns ns Propagation Delay Clear to Output VDD e 5V VDD e 10V VDD e 15V 175 80 65 350 160 130 ns ns ns tTLH, tTHL Propagation Delay Address to Output VDD e 5V VDD e 10V VDD e 15V 225 100 75 450 200 150 ns ns ns tTHL, tTLH Transition Time (Any Output) VDD e 5V VDD e 10V VDD e 15V 100 50 40 200 100 80 ns ns ns TWH, TWL Minimum Data Pulse Width VDD e 5V VDD e 10V VDD e 15V 100 50 40 200 100 80 ns ns ns tWH, tWL Minimum Address Pulse Width VDD e 5V VDD e 10V VDD e 15V 200 100 65 400 200 125 ns ns ns tWH Minimum Clear Pulse Width VDD e 5V VDD e 10V VDD e 15V 75 40 25 150 75 50 ns ns ns tSU Minimum Set-Up Time Data to E VDD e 5V VDD e 10V VDD e 15V 40 20 15 80 40 30 ns ns ns tH Minimum Hold Time Data to E VDD e 5V VDD e 10V VDD e 15V 60 30 25 120 60 50 ns ns ns tSU Minimum Set-Up Time Address to E VDD e 5V VDD e 10V VDD e 15V b 15 0 0 50 30 20 ns ns ns tH Minimum Hold Time Address to E VDD e 5V VDD e 10V VDD e 15V b 50 b 20 b 15 15 10 5 ns ns ns CPD Power Dissipation Capacitance Per Package (Note 4) 100 CIN Input Capacitance Any Input 5.0 tPHL, tPLH Propagation Delay Data to Output tPLH, tPHL Propagation Delay Enable to Output tPHL Conditions VDD e 5V VDD e 10V VDD e 15V Min pF 7.5 pF *AC Parameters are guaranteed by DC correlated testing. Note 1: ``Absolute Maximum Ratings'' are those values beyond which the safety of the device cannot be guaranteed; they are not meant to imply that the devices should be operated at these limits. The tables of ``Recommended Operating Condtions'' and ``Electrical Characteristics'' provide conditions for actual device operation. Note 2: VSS e 0V unless otherwise specified. Note 3: IOH and IOL are tested one output at a time. Note 4: Dynamic power dissipation (PD) is given by: PD e (CPD a CL) VCC2f a PQ; where CL e load capacitance; f e frequency of operation; for further details, see application note AN-90, ``54C/74C Family Characteristics''. 3 Logic Diagram CD4099B TL/F/5984 - 2 4 Switching Time Waveforms TL/F/5984 - 3 Physical Dimensions inches (millimeters) Ceramic Dual-In-Line Package (J) Order Number CD4099BMJ or CD4099BCJ NS Package Number J16A 5 CD4099BM/CD4099BC 8-Bit Addressable Latch Physical Dimensions inches (millimeters) (Continued) Molded Dual-In-Line Package (N) Order Number CD4099BMN or CD4099BCN NS Package Number N16E LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: (a49) 0-180-530 85 86 Email: cnjwge @ tevm2.nsc.com Deutsch Tel: (a49) 0-180-530 85 85 English Tel: (a49) 0-180-532 78 32 Fran3ais Tel: (a49) 0-180-532 93 58 Italiano Tel: (a49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.