3MTM Four-Wall Header .100 x .100 Latch/Ejector, Straight and Right Angle 3000 Series * Military (with 3M's 3518 & N3518 polarizing key) and centerbump polarization * Optional ejector latches * Mounting holes for securing header to board * Optional polarizing posts available * High temperature insulator option suitable for "no lead" soldering operations * High temperature option suitable for reflow soldering using "paste in hole" techniques * Solder tail and wrap post options * See Regulatory Information Appendix for chemical compliance information Date Modified: February 2, 2007 TS-0772-08 Sheet 1 of 4 Physical Insulator Material: Glass Filled Polyester (PBT) Glass Filled Polyester (PCT) - (High Temp Option) Flammability: UL 94V-0 Color: Gray (PBT), Beige (PCT), Black (PCT) Contact Material: Copper Alloy Plating Underplating: Nickel - Overall (See Ordering Information) Wiping Area: 10 [ 0.25 m ] and 30 [ 0.76 m ] Gold Solder Tails: Tin Lead or Matte Tin (See Ordering Information) Marking: 3M Logo, Part Identification Number and Orientation Triangle Electrical Current Rating: 1 A Insulation Resistance: >1 x 109 at 500 VDC Withstanding Voltage: 1000 VRMS at Sea Level Environmental -55C to +105C Process Rating: 260C - (High Temp PCT insulator verson), single pass, (profile per J-STD-020C) (PBT insulator version), maximum insulator temperature 191C (solder wave process only) Moisture Sensitivity Level: 1 (per J-STD-020C) High Temp. (PCT) versions only Temperature Rating: UL File No.: E68080 3 Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Four-Wall Header .100 x .100 Latch/Ejector, Straight and Right Angle 3000 Series -X2XX Header with Short Ejector/Latch for 3M Sockets without Strain Relief -X0XX Header without Latch Ejector .08 [2.0] -X3XX Header with Long Ejector/Latch for 3M Sockets with Strain Relief .08 [2.0] .573 .010 [ 14.55 ] .424 .010 [ 10.77 ] 1.07 Ref [27.2] .97 Ref [24.6] .37 Ref [9.4] .025 .002 Sq Typ [ 0.64 ] .46 Ref [11.7] D .100 2.54 .020 0.51 .24 [6.1] .28 7.1 REF. .34 8.6 .25 6.4 .13 3.3 .30 [7.6] .100 2.54 2X O .100 [2.54] SEE NOTE #2 REF. POSITION #1 B Dim. E CL "Y" F Typ Position 1 Orientation Triangle Section A-A (Straight) .025 .002 Sq Typ [ 0.64 ] .24 [6.1] F Typ CL .30 [7.6] "Y" Dim. E .049 Ref [1.24] .100 Ref [2.54] .21 [5.3] Notch A (See Table 1 & Note1) Notch B (See Table 1) Notch C (See Table 1 & Note 1) .16 [4.1] A B .68 [17.3] .12 [3.0] .35 [8.9] .020 [0.51] A 2X o .100 [2.54] (See Note 2) C B .197 [5.00] .20 [5.1] A Section B-B (Right Angle) TS-0772-08 Sheet 2 of 4 3 Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Four-Wall Header .100 x .100 Latch/Ejector, Straight and Right Angle Table 1 Dimensions 3000 Series Pin Quantity 3M Part Number A B C D Polarization Notches Provided 10 14 16 20 24 26 30 34 40 50 60 64 3793 3314 3408 3428 3627 3429 3440 3431 3432 3433 3372 3764 1.26 [32.1] 1.46 [37.2] 1.56 [39.7] 1.76 [44.8] 1.96 [49.8] 2.06 [52.4] 2.26 [57.4] 2.46 [62.6] 2.76 [70.2] 3.26 [82.9] 3.76 [95.6] 3.96 [100.7] 1.105 [28.07] 1.305 [33.15] 1.405 [35.69] 1.605 [40.77] 1.805 [45.85] 1.905 [48.39] 2.105 [53.47] 2.305 [58.55] 2.605 [66.17] 3.105 [78.87] 3.605 [91.57] 3.805 [96.65] .865 [21.97] 1.065 [27.05] 1.165 [29.59] 1.365 [34.67] 1.565 [39.75] 1.665 [42.29] 1.865 [47.37] 2.065 [52.45] 2.365 [60.07] 2.865 [72.77] 3.365 [85.47] 3.565 [90.55] .71 [18.0] .91 [23.1] 1.01 [25.6] 1.21 [30.7] 1.41 [35.8] 1.51 [38.3] 1.71 43.43] 1.91 [48.5] 2.21 [56.1] 2.71 [68.8] 3.21 [81.5] 3.41 [86.6] BC BC ABC ABC ABC ABC ABC ABC ABC ABC ABC ABC Inch [mm] Tolerance Unless Noted .0 Inch .1 .00 .000 .01 .005 [ ] Dimensions for Reference only Table 2 3M Part Number Suffix Contact Tail Dim E -5XX2 Solder Tail for .112 .010 .0245 .0005 .028 .001 .0075 Ref o.035 .003 -6XX2 .062 [1.57] [2.84] [0.622] [0.71] [0.191] [0.89] (See Note 3) Pin Cross Section Dim F Diagonals Dim G Corner Radii Thick PC Board -5X03 Solder Tail for .155 .010 .0245 .0005 .028 .001 .0075 Ref o.035 .003 -6X03 .094 [2.39] to [3.94] [0.622] [0.71] [0.191] [0.89] .125 [3.18] Thick PC Board o.106 or o.116 [2.95] [2.69] or o.116 o.106 [2.69] [2.95] (See Note 2) .300 [7.62] Side to Side Stackability "Y" .41 (See Note 2) [10.4] Max to Edge of PCB Dim G for Daisy Chain Dim G "Y" CL .060 [1.52] Position 1 CL .029 [0.74] .100 .003 [2.54] .100 .003 [2.54] .352 [8.94] .100 .003 [2.54] B Position 1 .100 .003 [2.54] .232 [5.89] C Recommended Mounting Hole Pattern Recommended Mounting Hole Pattern (Straight) (Right Angle) Notes: 1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or #N3518). 2. Mounting hardware: From solder side of pc board use #4-24 thread cutting screw (3M Part # 3341-5) and .116 [2.95] dia mounting hole. For right angle version only, #2-56 bolt and nut (3M Part # 3341-6) with .106 [2.69] dia mounting hole may be used. 3. The recommended PCB hole size for the kinked tail positions on the .112 solder tail connector is .035 .002. See page 4 for kink position details (K2 version). 4. Contact your 3M sales representative for custom requirements. Ordering Information Blank = Std. Temp Gray (PBT) /(Blank or UB Pltg. Req'd.) N = High Temp Beige (PCT) /(Blank or UB Pltg. Req'd.) N = High Temp Black (PCT)/(RB Plating Req'd) 3M Part Number (See Table 1) Pin Configuration 5 = Right Angle Solder Tails 6 = Straight Solder Tails 3 Interconnect Solutions http://www.3M.com/interconnects/ X3XXX-XXXXXX Plating:AR = 10 " [ 0.25 m ] Gold and 40 - 120 " [ 1.0 - 3.0 m ] Matte Tin over 50 -100 " [ 1.25 - 2.54 m ]Nickel (App. E1 & C1 Apply) RB = 30 " [ 0.76 m ] Gold and 200 " [ 5.08 m ] Matte Tin over 100 " [ 2.54 m ] Nickel (App. E1 & C1 Apply) Blank or UB = 30 " [ 0.76 m ] Gold and 200 " [ 5.08 m ] Tin Lead over 100 " [ 2.54 m ] Nickel (App. E3 & C2 Apply) Latch/Ejector System 0 = No Latch/Ejector installed 2 = Short Roll Pin Latch/Ejectors 3 = Long Roll Pin Latch/Ejectors TS-0772-08 Tail Sheet 3 of 4 02 = for .062 [1.57] thick board 03 = for .094 to .125 [2.39 to 3.18] thick board K2 = kinked for .062 [1.57] thick board 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Four-Wall Header .100 x .100 Latch/Ejector, Straight and Right Angle, Accessories Polarizing Post Part Customization This spec sheet details our standard offering. 3M has several capabilities that can provide a part tailored to your specific needs. Ask your 3M sales representative or customer service for more details. * Use of snap-in style latch/ejectors in either short (N3XXX-X5XX) or long (N3XXX-X6XX) styles, installed or shipped separately (the -5 & -6 snap-in latches are dimensional and functional equivalents to the -2 & -3 roll pin latches (which are also available to be ordered separately with roll pins included). If ordering snap-in or roll pin style latches separately, please use the below chart Standard Temperature (PBT) High Temperature (PCT) High Temperature (PCT) High Temperature (PPA) High Temperature (PPA) High Temperature (PPA) Short Latch 3505-2 N3505-2 N3505-2B 3505-30 N3505-30 N3505-30B Long Latch 3505-3 N3505-3 N3505-3B 3505-31 N3505-31 N3505-31B 3000 Series Latch Style Roll Pin Roll Pin Roll Pin Snap-In Snap-In Snap-In * Selective pin removal (ATA or other compatability) * Wire wrap tails styles Color Gray Beige Black Gray Beige Black 3 2 0 1 -3 3 2 0 1 -4 .321 [8.15] PBT LCP G ra y B la c k .100 Dia [2.54] Note: Insert Post into one mounting hardware hole on bottom of header. Set post to protrude .115 [2.92]. 2500 & 3000 Series Shrouded Header Total Number of Pins Number of Tails Kinked 10 4 3 4 7 8 14 4 3 4 11 12 16 4 3 4 13 14 20 4 3 4 17 18 24 4 3 4 21 22 26 4 3 4 23 24 30 4 5 6 25 26 34 4 7 8 27 28 36 4 7 8 27 28 40 4 7 8 33 34 50 4 7 8 43 44 60 4 11 12 49 50 64 4 11 12 53 54 Positions Kinked Kinked Tail Detail: Kink is located .05" below bottom surface of plastic. External radius of kink toward part centerline. Mounting Hardware 3341-5 (Installed from bottom of board) 3341-6 (Must be inserted prior to latch on vertical headers) Polarizing Keys Dim A .50 [12.7] .31 [7.9] Panhead Thread Cutting Screw: #4-24 X 5/16 Type: USA Std BT, Federal BG N3518 LCP Blac k .02 3518 PBT Gray .02 Hex Head Bolt, Nut and Washer Bolt - #2-56 X 1/2 3341-5 & 6 Material - Stainless Steel Breakaway Tab .15 [3.8] .09 [2.3] .34 Ref [8.6] A Note: #2216 B/A Scotchweld can be used to adhere keys. TS-0772-08 Sheet 4 of 4 3 Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix (RIA) 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. RIA-2217-A Appendix C2: China RoHS 20 Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. Name and Content of Hazardous Substances or Elements Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/interconnects Printed in USA (c) 3M 2007