GBPC6005 thru GBPC610 Vishay General Semiconductor Glass Passivated Single-Phase Bridge Rectifier Major Ratings and Characteristics IF(AV) 6A VRRM 50 V to 1000 V IFSM 175 A IR 5 A VF 1.0 V Tj max. 150 C Case Style GBPC6 ~ ~ ~ ~ Features Mechanical Data * * * * * * Case: GBPC6 Epoxy meets UL-94V-0 Flammability rating Terminals: Silver plated (E4 Suffix) leads, solderable per J-STD-002B and JESD22-B102D Polarity: As marked, Positive lead by belevled corner Mounting Torque: 10 cm-kg (8.8 inches-lbs) max. Recommended Torque: 5.7 cm-kg (5 inches-lbs) UL Recognition file number E54214 Ideal for printed circuit boards Typical IR less than 0.5 A High surge current capability High case dielectric strength 1500 VRMS Solder Dip 260 C, 40 seconds Typical Applications General purpose use in ac-to-dc bridge full wave rectification for Power Supply, Home Appliances, Office Equipment, Industrial Automation applications Maximum Ratings Ratings at 25 C ambient temperature unless otherwise specified. Parameter Symbols GBPC 6005 GBPC 601 Maximum repetitive peak reverse voltage VRRM 50 100 200 400 Maximum RMS bridge input voltage VRMS 35 70 140 280 VDC 50 100 200 400 600 Maximum DC blocking voltage GBPC 602 GBPC 604 6.0 GBPC 606 GBPC 608 GBPC 610 Unit 600 800 1000 V 420 560 700 V 800 1000 V A Maximum average forward TC = 50 C rectified output current at TA = 40 C (3) IF(AV) Peak forward surge current single sine-wave superimposed on rated load IFSM 175 A I2 t 127 A2sec TJ, TSTG - 55 to + 150 C (1)(2) Rating for fusing (t < 8.3 ms) Operating junction and storage temperature range Document Number 88613 08-Jul-05 3.0 www.vishay.com 1 GBPC6005 thru GBPC610 Vishay General Semiconductor Electrical Characteristics Ratings at 25 C ambient temperature unless otherwise specified. Parameter Test condition Symbols GBPC 6005 GBPC 601 GBPC 602 GBPC 604 GBPC 606 GBPC 608 GBPC 610 Unit Maximum instantaneous forward voltage drop per leg at 3.0 A VF 1.0 V Maximum DC reverse current at rated DC blocking voltage per leg TA = 25 C TA = 125 C IR 5.0 500 A Typical junction capacitance per leg at 4.0 V, 1 MHz CJ 186 90 pF Thermal Characteristics Ratings at 25 C ambient temperature unless otherwise specified. Parameter Symbols GBPC 6005 GBPC 601 GBPC 602 RJA RJC Typical thermal resistance per leg(1) GBPC 604 GBPC 606 GBPC 608 GBPC 610 Unit 22 7.3 C/W Notes: (1) Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer with #6 screw (2) Unit mounted on 5.5 x 6.0 x 0.11" thick (14 x 15 x 0.3 cm) Al. Plate (3) Unit mounted on P.C.B. at 0.375" (9.5 mm) lead length with 0.5 x 0.5" (12 x 12 mm) copper pads Ratings and Characteristics Curves (TA = 25 C unless otherwise noted) 200 Case Temperature, TC Heatsink Mounting 5.5 x 6.0 x 0.11" Thk (14 x 15 x 0.3 cm) AL. Plate 60 HZ Resistive or Inductive Load 6.0 4.0 2.0 Ambient Temperature, TA P.C.B. Mounting 0.375" (9.5 mm) Lead Length 0 0 50 100 150 Figure 1. Derating Curve Output Rectified Current 2 TJ = TJ max. Single Half Sine-Wave 175 150 125 100 75 1.0 Cycle 50 Temperature (C) www.vishay.com Peak Forward Surge Current (A) Average Forward Output Current (A) 8.0 1 100 10 Number of Cycles at 60 HZ Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Leg Document Number 88613 08-Jul-05 GBPC6005 thru GBPC610 Vishay General Semiconductor 100 Junction Capacitance, pF Instantaneous Forward Current (A) 1,000 10 TJ = 25 C Pulse Width = 300 s 1% Duty Cycle 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.6 1.4 TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p 100 10 0.1 1.8 50 - 400 V 600 - 1000 V 100 10 1 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Forward Characteristics Per Leg Figure 5. Typical Junction Capacitance Per Leg Transient Thermal Impedance (C/W) Instantaneous Reverse Current (A) 100 TA = 125 C 100 TJ = 100 C 10 1 TJ = 25 C 0.1 0 20 40 60 1 0.1 0.01 100 80 10 1 0.1 10 100 t, Heating Time (sec.) Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics Per Leg Figure 6. Typical Transient Thermal Impedance Per Leg Package outline dimensions in inches (millimeters) Case Style GBPC6 0.630 (16.00) 0.590 (14.98) 0.445 (11.30) 0.405 (10.29) HOLE FOR #6 SCREW 0.158 (4.01) 0.142 (3.61) 0.630 (16.00) DIA. AC 0.445 (11.30) 0.405 (10.29) 0.590 (14.98) AC 0.128 (3.25) 0.048 (1.22) 0.042(1.07) DIA. 0.038(0.96) 0.094 (2.4) x 45 degrees 0.040 (1.02) TYP. 0.750 (19.05) MIN. 0.200 (5.08) 0.160 (4.06) Polarity shown on side of case: Positive lead by beveled corner Document Number 88613 08-Jul-05 www.vishay.com 3 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1