1
NEW
2010.8
Micro-USB connectors meeting requirements of USB 2.0 Standard
ZX Series
■Overview
Extremely small high reliability connectors complying with physical,
electrical and environmental requirements of Micro-USB standard
(USB 2.0).
Receptacles and plugs are available in a wide variety of mounting
and termination configurations, permitting their use in various
applications.
■Features
1. Size reduction
Compared with the standard Mini-B connectors, the size of ZX
connectors is reduced by approximately 60% while still allowing a
high-speed data transfer of 480 Mbps, specified in USB 2.0.
2. Receptacle styles
Two interface configurations: Micro-B and Micro-AB in standard,
mid-mount and reverse mounting styles.
SMT and through-hole (shell) PC board terminations
3. Plug styles
Corresponding to the receptacle styles, two interface configurations:
Micro-B and Micro-A, with direct wire or PCB wire soldering.
Several plug styles can be used for data transmission, earphone or
charging applications.
4. High durability
Unique contact and lock configuration assures high durability while
maintaining easy insertion / disconnection. Fully mated condition
(when mated with corresponding HRS connector) is confirmed by a
definite tactile sensation
Reverse
(Top mount)
Drop-in
(Mid-mount)
Standard
(Bottom mount)
USB 2.0 Hi-Speed (480 Mbps)
Eye pattern measurement results:
Measured with USB 2.0 cable 2.4 m long
500ps/div
200 mV/div
TP2
Note: Contact us to ascertain whether a TID number has
been acquired for an individual product.
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
2
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
1. Contact resistance 30 mø max. 100 mA
2. Withstanding voltage No flashover or insulation breakdown 100 V AC / 1 minute
3. Capacitance 2 pF max. Between adjacent contacts at 1,000 Hz (AC voltage)
4. Durability Contact resistance: Rise from initial value of 10 mø max. 10,000 cycles
5. Total insertion/removal force Insertion force: 35 N max., Removal force: 8 N min. Mated with corresponding connector
Item ConditionsSpecification
■Specifications
Ratings 1 A (per contact) or
1.8 A (contacts No. 1 and 5) and
0.5 A (contacts No. 2, 3, and 4)
Current rating
Voltage rating
Operating temperature range
Storage temperature range
30 V AC
-30°C to +85 °C (Note1)
-30 °C to +85°C
■Materials
●Receptacles
●Plugs
Note 1: Classifiers such as A, B, and C are entered for *.
■Ordering information
ZX 62 RD - B - 5 P ** 8
1 2 4 53 6 7 8
ZX 40 - B - 5 S **- UNIT
1 2
ZX 40 - B - SLDA
●Receptacles
●Plugs
■Product Styles Table
4 5 6 7 9
4 91 2
Series name ZX
Termination style 10's: Right-angle PCB wire, SMT
20's: Straight, PCB wire
40's: Direct wire
60's: Right-angle, PCB wire
80's: Cradle SMT
Board mounting style Blank Standard (Bottom mount)
(Receptacles) D Standard (Bottom mount) through hole
R Reverse (Top mount)
RD Reverse (Top mount) through hole
M Drop-in (Mid-mount)
Mating side configuration A Micro-A
B Micro-B
AB Micro-AB
Number of contacts 5
Contact type P Receptacle- Male
S Plug – Female
Serial No.
Shell termination style – Blank SMT
Receptacles 8 Through hole (solder tab length: 0.8mm)
Components-plugs UNIT Assembly (Insulator/contact/lock)
SLD* Cover (Note 1)
1
2
3
4
5
6
8
7
9
Micro-A
Micro-B
Micro-AB
Interface Receptacle Plug
Part
Insulator LCP Micro-B: Black, Micro-AB: Gray UL94V-0
Contacts Copper alloy Selective gold plated ---------------
Shell Stainless steel Tin alloy plating ---------------
Material Finish Remarks
Part
Insulator Synthetic resin Micro-A: White, Micro-B: Black UL94V-0
Contacts Copper alloy Selective gold plated ---------------
Lock spring Stainless steel --------------- ---------------
Shell Stainless steel Nickel plated or unfinished ---------------
Material Finish Remarks
Note1: Includes temperature rise caused by current flow.
Note2: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
ZX62-B-5PA(11)
PCB wire soldering
(SMT)
Assembly
(insulator/contacts/lock) :ZX64-B-5S-UNIT(14)
Cover-top :ZX64-B-SLDA
Cover- bottom :ZX64-SLDB
Charging
PCB wire soldering
(SMT)
Assembly
(insulator/contacts/lock) :ZX64-B-5S-UNIT(14)
Cover :ZX64-B-SLDC
Charging
Earphone
Direct wire soldering
Data
Assembly
(insulator/contacts/lock) :ZX40-A-5S-UNIT
Cover-top :ZX40-A-SLDA
Cover- bottom :ZX40-SLDB
14 and 15
14 and 16
17 and 18
3
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
Mating side
configuration
Application
Mounting, termination
styles/wire attachment
■Configurations
Note: 1. Part numbers in the Plugs section of the above table list the Assembly (insulator/contacts/locks) and the corresponding Shields/Covers.
Note: 2. Optional Printed Circuit boards for the Plugs are shown for reference only. Not supplied with applicable connectors.
Note: 3. The color of the insulators body in the Assembly (insulator/contacts/lock) shown in the 3D Image column above is blue for clarity. Refer to the
Materials (Page 2) for correct colors.
Micro-B
Receptacles
Micro-AB
Standard
SMT
Plugs
Micro-B
Part Number 3D Image Page
4
SMT
+
DIP
ZX62D-B-5PA8 4
SMT
Reverse ZX62R-B-5P 5
SMT
Drop-in ZX62M-B-5P(02) 5
SMT
Standard
ZX62-AB-5PA(11) 6
SMT
+
DIP
SMT
SMT
+
DIP
Reverse
ZX62D-AB-5P8
ZX62R-AB-5P
ZX62RD-AB-5P8
6
7
7
Direct wire soldering
Data
Assembly
(insulator/contacts/lock) :ZX40-B-5S-UNIT(12)
Cover-top :ZX40-B-SLDA
Cover-bottom :ZX40-SLDB
9 and 10
PCB wire soldering
(right angle, through hole)
Assembly
(insulator/contacts/lock) :ZX10-B-5S-UNIT(12)
Cover-top :ZX10-B-SLDA
Cover-bottom :ZX10-SLDB(3.3)
11 and 12
PCB wire soldering
(straight, through hole)
Earphone
Assembly
(insulator/contacts/lock) :ZX20-B-5S-UNIT(12)
Cover :ZX20-B-SLDC
13
Cradles
Micro-B
Micro-A
SMT
+
DIP
Cradle
ZX80-B-5S 19
With lock
ZX80-B-5SA 19
Without lock
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
4
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Receptacles
●Micro B - Standard (Bottom mount), Shell SMT
Part Number CL No. Packaging
ZX62-B-5PA(11) 242-0033-8-11 3,500 pieces per reel
No.5
7.9 2.15
7.5
2.5
0.6 5
2.8
No.1
PCB EDGE
NO CONDUCTIVE
TRACES
0.5
4.3
6.2
9.8
1.6
No.5
1.45 3.35
1.9
1.35
0.4
1.3
2.6
4.1
8.3
No.1
■Recommended PCB mounting pattern
●Micro B - Standard (Bottom mount), Shell through hole
Part Number CL No. Packaging
ZX62D-B-5PA8 242-0056-3 2,000 pieces per reel
All dimensions: mm
4.85
2.6
0.65
1.25(LAND)
2.9
0.85(TH)
0.2
NO CONDUCTIVE TRACES
R0.325(TH)
R0.325(TH) 0.5
1.3
1.9
2.75 3.35
1.5(TH)
4.1
5.2
7.2
9.4
PCB EDGE
0.5(TH)
R0.3(TH)
0.1
R0.525(LAND)
1.05(LAND)
0.4 0.65(TH)
1.35
No.5
R0.5(LAND)
No.1
No.1 No.5
7.2
2.50.8
7.5
4.85
0.6 5
2.8
2.15 2.9
■Recommended PCB mounting pattern
All dimensions: mm
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
5
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
PCB EDGE
No.1 No.5
0.4
R0.4
3.6
2.4
4.3
6.9
2.6
1.3
7.8
12
8.8
1.9
7.15
5.15
2.4
1.4
1.05
1.5
4.7
2
C0.3
No.5
No.1
4.8
4.7
0.25
1.3
2.6
7.5
11.5
7.5
0.6
1.25 1.23
2.74
4.3
5
5.3
1.9
■Recommended PCB mounting pattern
No.5
NO CONDUCTIVE TRACES
1.35
2
1.3
4.1
8.3
1.9
2.9
0.43
3.35
No.1
1.45
2.6
0.4
5.6
9.8
3.9
6.6
0.5 No.5 No.1
7.5
8.8
2.5
2.15
0.6 5
■Recommended PCB mounting pattern
Part Number CL No. Packaging
ZX62R-B-5P 242-0028-8 2,000 pieces per reel
■Receptacles
●Micro B - Reverse (Top mount) Shell SMT
Part Number CL No. Packaging
ZX62M-B-5P(02) 242-0024-7-02 2,000 pieces per reel
●Micro B - Drop-in (Mid-mount), Shell SMT All dimensions: mm
All dimensions: mm
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
6
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
No.1 No.5
0.5
1.3
1.9
1.45
3.35
1.35
2.6
0.4
6.2
9.8
4.3
1.6
8.3
4.1
PCB EDGE
8.8 No.5No.1
7.5
2.5
2.8
2.15
50.6
NO CONDUCTIVE TRACES
■Recommended PCB mounting pattern
■Receptacles
●Micro AB - Standard (Bottom mount), Shell SMT
Part Number CL No. Packaging
ZX62-AB-5PA(11) 242-0045-7-11 3,500 pieces per reel
0.6
8.35
7.5
2.5
No.5No.1
4.45
0.6
2.025 3.125
5
2.8
1.3 1.7
1.5
0.65(TH)
1.05(LAND)
R0.45(LAND)
R0.25(TH)
0.4
2.6
4.45
1.35
1.9
3.4752.625
4.1
5.2
(0.5)
(0.325)
9.4
0.5
1.5(TH)
R0.3(TH)
R0.5(LAND)
7.35(TH)
9(TH)
1.3
0.85(TH)
1.25(LAND)
3.125
No.5
No.1
PCB EDGE
NO CONDUCTIVE TRACES
■Recommended PCB mounting pattern
●Micro AB - Standard (Bottom mount), Shell through hole
Part Number CL No. Packaging
ZX62D-AB-5P8 242-0027-5 2,000 pieces per reel
All dimensions: mm
All dimensions: mm
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
7
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
2.9
4-R0.4
4.1
8.3
4.75
0.85
0.43
1.45
2.6
1.3
1.35
0.4
0.5
1.6
9.8
6.6
3.35
1.9
NO CONDUCTIVE TRACES
No.5 No.1
PCB EDGE
No.5 No.1
0.5985 5
2.15
2.5
7.5
■Recommended PCB mounting pattern
■Receptacles
●Micro AB - Reverse (Top mount), Shell SMT
Part Number CL No. Packaging
ZX62R-AB-5P 242-0035-3 2,000 pieces per reel
All dimensions: mm
0.6
PCB EDGE
NO CONDUCTIVE TRACES
9.4
No.5
R0.25(TH)
No.1
9(TH)
7.35(TH)
6.6
4.45
2.6
1.3
0.4
1.05(LAND)
R0.2MAX
R0.45(LAND)
0.65(TH)
1.35
1.5
1.7
3.475
R0.5(LAND)
2.625
1.9
1.5(TH)
1.3
0.85
2.9
4.75
(0.5)
(0.325)
R0.3(TH)
3.125
0.555 1.25(LAND)
0.85(TH)
8.35
2.5
7.5 No.1No.5
4.45
50.6
2.025
3.125
■Recommended PCB mounting pattern
●Micro AB - Reverse (Top mount), Shell through hole
Part Number CL No. Packaging
ZX62RD-AB-5P8 242-0025-0 2,000 pieces per reel
All dimensions: mm
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
8
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
Plugs – assembled (not-terminated, without overmold)
Components
ZX40-SLDB
ZX40-*-SLDA
Cover-top
ZX40-*-5S-UNIT
Assembly
(insulator/contacts/lock)
*No PCB required
Cover-bottom
Cover-top
Cover-bottom
ZX10-SLDB
Assembly
(insulator/contacts/lock)
*SMT PCB termination
ZX10-B-5S-UNIT
ZX10-B-SLDA
ZX10 - PCB wire soldering
Cover
ZX20-*-SLDC
Assembly
(insulator/contacts/lock)
*Straight through hole PCB
termination
ZX20-*-5S-UNIT
ZX20 - PCB wire soldering
Cover-bottom
ZX64-SLDB
Cover-top
Assembly
(insulator/contacts/lock)
*Right angle through hole
PCB termination
ZX64-*-5S-UNIT
ZX64-*-SLDA
ZX64 - PCB wire soldering
ZX40 - Direct wire soldering
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
9
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
●Micro B - Component, Cover-top - Direct wire soldering
Part Number CL No. Packaging
ZX40-B-SLDA 242-0003-7 4,000 pieces per reel
22.6
1.8
8
6.85
Contact HRS for Cable Termination Procedure Manual.
■Plugs
●Micro B - Assembly (insulator/contacts/lock) – Direct wire soldering
Part Number CL No.
ZX40-B-5S-UNIT(12) 242-0002-4-12
14.1
7.9
No.1No.5
4.2
All dimensions: mm
All dimensions: mm
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
10
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs
●Micro A, Micro B - Component, Cover-bottom - Direct wire soldering
Part Number CL No. Packaging Cable dia.
ZX40-SLDB 242-0004-0 4,000 pieces per reel Ø3.8
ZX40-SLDB(3.3) 242-0023-4 Ø3.3
16.2
8
16.2
8
ZX40-SLDB ZX40-SLDB(3.3)
All dimensions: mm
22.6
6.85
8.6
4.75
1.8
●Assembled
All dimensions: mm
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
11
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
All dimensions: mm
Contact HRS for Cable Termination Procedure Manual.
■Plugs
●
Micro B - Assembly (insulator/contacts/lock) - Right angle through hole PCB wire soldering (non-direct)
●Micro B - Component, Cover-top - Right angle through hole
23.4
6.85
7.7
1.8
Part Number
ZX10-B-SLDA
CL No. Packaging
242-0031-2
4,500 pieces per reel
Part Number
ZX10-B-5S-UNIT(12)
CL No. Packaging
242-0030-0-12
1,500 pieces per reel
All dimensions: mm
PCB mounting pattern
*PCB required (not supplied)
Max. thickness: 0.6mm
No.5
No.1
X
0.15
1.3
2.6
3.05
3.35
0.95
1.55
0.45
0.95
1.25
5-Ø0.9(LAND)
5
5-Ø0.5(TH)
7.3
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
12
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
16.95
7.7
■Plugs
●Micro B - Component, Cover-bottom – Right angle through hole
23.4
8.1
6.85
4.4
1.8
●Assembled
Part Number
ZX10-SLDB(3.3)
CL No. Packaging
242-0032-5
4,500 pieces per reel
All dimensions: mm
All dimensions: mm
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
13
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
All dimensions: mm
■Plugs
●Micro B - Assembly (insulator/contacts/lock) - Straight through hole PCB wire soldering (non-direct)
Contact HRS for Cable Termination Procedure Manual.
Part Number CL No.
ZX20-B-5S-UNIT(12) 242-0012-8-12
All dimensions: mm
1.3
2.6
5-0.15
1
1.4
12.2
1.55
0.35
7.9
No.1No.5
3.975
4.2
1.3
2.6
8.2
1.2(Through hole)
0.6(Through hole)
1.55
10.25
5-Ø0.7(Through hole)
5-Ø1.1(Land)
R0.3(Through hole)
1(Land)
1.6(Land)
R0.5(Land)
No.1 No.5
PCB mounting pattern
*PCB required (not supplied)
Max. thickness: 0.6mm
●Micro B - Component, Cover - Straight, through hole
Part Number CL No. Packaging
ZX20-B-SLDC 242-0022-1 4,000 pieces per reel
1.1
8.2
2-0.2
0.6
8
6.85
1.8
12.1
4.4
8.4
2-0.2
8.2
2.6
1.3
12.2
1.55
1.8
0.35
0.6
1
1.4
6.85
5-0.15
Assembly
(insulator/contacts/lock) Cover
●Assembled
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
14
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
●Micro B - Component, Cover-top – Right angle SMT
Part Number CL No. Packaging
ZX64-B-SLDA 242-0013-0 4,000 pieces per reel
24.7
6.85
8
1.8
All dimensions: mm
16.1
1.3
2.6
5-0.15
3.7
7.9 No.1No.5
■Plugs
●Micro B - Assembly (insulator/contacts/lock) - Right angle SMT
Contact HRS for Cable Termination Procedure Manual.
Part Number CL No.
ZX64-B-5S-UNIT(14) 242-0009-0-14
All dimensions: mm
No.1
No.5
1.3
2.6
6.8
0.5
1.1
1.5
6
0.35
PCB mounting pattern
*PCB required (not supplied)
Max. thickness: 1.0mm
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
15
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
24.7
4.1
8.4
6.85
1.8
Assembly
(insulator/contacts/lock) Cover-top
Cover-bottom
●Assembled
■Plugs
●Micro B - Component, Cover-bottom - Right angle SMT
Part Number CL No. Packaging
ZX64-SLDB 242-0049-8 4,000 pieces per reel
18.25
8
All dimensions: mm
All dimensions: mm
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
16
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
16.1
6.85
8.4
4.1
1.8
Assembly
(insulator/contacts/lock) Cover-top
Cover-bottom
●Assembled
All dimensions: mm
6.85
8
1.8
16.1
■Plugs
●Micro B - Component, Shell/cover – Right angle SMT
Part Number CL No. Packaging
ZX64-B-SLDC 242-0018-4 4,000 pieces per reel
Shell/cover, without cable clamp
This shell/cover does not require ZX64-SLDB.
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
17
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
Part Number CL No. Packaging
ZX40-A-SLDA 242-0011-5 4,000 pieces per reel
22.6
8
1.8
6.85
●Micro A - Component, Cover-top - Direct wire soldering
All dimensions: mm
Contact HRS for Cable Termination Procedure Manual.
Part Number CL No.
ZX40-A-5S-UNIT 242-0010-2
■Plugs
●Micro A - Assembly (insulator/contacts/lock) - Direct wire soldering
12.4
7.9
4.2
No.1No.5
Contacts
Insulator body (color grey)
All dimensions: mm
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
18
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
4.75
22.6
6.85
8.6
1.8
Assembly
(insulator/contacts/lock) Cover-top
Cover-bottom
●Assembled
Part Number CL No. Packaging Cable dia.
ZX40-SLDB 242-0004-0 4,000 pieces per reel Ø3.8
ZX40-SLDB(3.3) 242-0023-4 Ø3.3
■Plugs
●Micro A, Micro B - Component, Cover-bottom - Direct wire soldering
16.2
8
16.2
8
ZX40-SLDB ZX40-SLDB(3.3)
All dimensions: mm
All dimensions: mm
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
19
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
8-R0.25
Contact No.5
Contact No.1
2-Ø2.2(Hole)
16.55
0.37
8-R0.55
3.15
1.3(Through hole)
1.9(Land)
1.1(Land)
0.5(Through hole)
1.86
1.3
2.6
6.65
1.6(Through hole)
0.5(Through hole)
0.4
2.9
2.2
1.1(Land)
2.2(Land)
●Micro B, without lock
Part Number CL No. Packaging
ZX80-B-5SA 242-0019-7 100 pieces
6.85
No.5 No.1
2-0.2
6.65
1.3
2.6
5-0.15
1.88
2.78
2.42
0.37
2.32
3.52
16.55
20.55
2.5
7.1
13 1.15
1.86
3.15
0.7
1
R1.6
8.55
■PCB mounting pattern
■Plug-Vertical, cradle mount, Shell through hole
●Micro B, with lock
6.85
No.1
No.5
2-0.2
6.65
1.3
2.6
5-0.15
1.88
2.78
2.42
0.37
2.32
3.52
16.55
20.55
2.5
7.1
13 1.15
1.86
3.15
0.7
1
R1.6
8.55
Part Number CL No. Packaging
ZX80-B-5S 242-0017-1 100 pieces
All dimensions: mm
All dimensions: mm
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.
20
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Precautions
1. Exercise care when handling the connectors. Do not subject them to excessive external forces when mating/un-mating.
2. Mate and un-mate as intended, holding by the overmolded body, in the correct direction. Do not un-mate by pulling on the cable.
3. Some tooling marks may be visible on the surfaces of receptacle (shell/cover). No form/fit or function is affected.
4. Appearance of the surface finishes on the receptacles may vary between production runs. No affect on form, fit or function.
■Recommended Temperature Profile - Receptacles
●Using lead-free solder paste
150ç
(S)
180ç
120 S
(ç)
250 250ç
220çmin.
70 S
200
150
100
50
HRS test condition
Solder composition :Paste,96.5%Sn/3.0%Ag/0.5%Cu
Test board :Glass epoxy 35mm∞35mm∞0.8mm thick
The temperature profile is based on the left conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and
board size/thickness. Contact your solder paste and
equipment manufacturer for specific recommendations.
Note 1: Up to 2 cycles of Reflow soldering are possible
under the same conditions, provided that there is a
return to normal temperature between the first and
second cycle.
Note 2: The temperature profile indicates the board surface
temperature at the point of contacts with the
connector terminals.
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
®
■Packaging Specifications
12
A
B 1.75
2
4 0.5
1.8
Ø1.5
Unreeling direction
●Embossed carrier tape dimensions ●Reel Dimensions
D
Ø
13
Ø380
C
Unreeling direction
Part Number A dimension B dimension
ZX62-B-5PA 24 11.5
ZX62-AB-5PA 24 11.5
ZX62M-B-5P 24 11.5
Other 16 7.5
Part Number C dimension D dimension
Note : Tape and reel packaging (2,000 pieces/reel).
Order by number of reels.
ZX62-B-5PA 30.4 24.4
ZX62-AB-5PA 30.4 24.4
ZX62M-B-5P 30.4 24.4
Other 22.4 16.4
The contents of this catalog are current as of date of 08/2010. Contents are subject to change without notice for the purpose of improvements.
Theproductinformationinthiscatalogisforreferenceonly.PleaserequesttheEngineeringDrawingforthemostcurrentandaccuratedesigninformation.