PDM31516
Rev. 1.0 - 7/24/96 7-19
1
2
3
4
5
6
7
8
9
10
11
12
DC Electrical Characteristics (VCC = 3.3V ± 0.3V)
NOTE:1.Undershoots to –3.0V for 10 ns are allowed once per cycle.
Symbol Parameter Test Conditions Min. Max. Unit
ILI Input Leakage Current VCC = Max., VIN = Vss to VCC Com’l/
Ind. –5 5 µA
ILO Output Leakage Current VCC= Max.,
CE = VIH, VOUT = Vss to VCC
Com’l/
Ind. –5 5 µA
VIL Input Low Voltage –0.3(1) 0.8 V
VIH Input High Voltage 2.2 Vcc +
0.3 V
VOL Output Low Voltage IOL = 8 mA, VCC = Min. — 0.4 V
VOH Output High Voltage IOH = –4 mA, VCC = Min. 2.4 — V
Absolute Maximum Ratings
NOTE:1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation of the
device at these or any other conditions above those indicated in the operational sections of this
specification is not implied. Exposure to absolute maximum rating conditions for extended peri-
ods may affect reliability.
Recommended DC Operating Conditions
Symbol Rating Com’l. Ind. Unit
VTERM Terminal Voltage with Respect to VSS –0.5 to +4.6 –0.5 to +4.6 V
TBIAS Temperature Under Bias –55 to +125 –55 to +135 °C
TSTG Storage Temperature –55 to +125 –65 to +150 °C
PDPower Dissipation 1.5 1.5 W
IOUT DC Output Current 50 50 mA
Symbol Description Min. Typ. Max. Unit
VCC Supply Voltage 3.0 3.3 3.6 V
VSS Supply Voltage 0 0 0 V
Industrial Ambient Temperature –40 25 85 °C
Commercial Ambient Temperature 0 25 70 °C