1
06-2015, Rev. 0515
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
AXICOM
Signal
Signal Relays
n Telecom/signal relay (dry circuit, test access, ringing)
n Slim line 14x9mm (.551x.354”)
n Switching current 2A
n 2 form C bifurcated contacts (2 CO)
n High sensitivity results in low nominal power consumption, 80mW
for high sensitive, 140mW for sensitive version
n High mechanical shock resistance, up to 1500g survival
Typical applications
Communications equipment linecard application (ringing and test access),
PABX, voice over IP, office equipment, measurement and control equipment,
automotive equipment as CAN bus, keyless entry, speaker switch, medical
equipment, consumer electronics, set top boxes, HiFi.
Approvals
UL 508 File No. E 111441
Technical data of approved types on request
Contact Data
Contact arrangement 2 form C (CO)
Max. switching voltage 220VDC, 250VAC
Rated current 2A
Limiting continuous current, 85°C 2A
Switching Power 60W, 62.5VA
Contact material AgNi, gold-covered
Contact style bifurcated contact
Minimum switching voltage 100μV
Thermoelectrical potential <10µV
Initial contact resistance <50mΩ at 10mA
Frequency of operation, without load 50 operations/s
Operate time typ. 2ms, max. 4ms
Set/reset time typ. 2ms, max. 4ms
Release time
without diode in parallel typ. 2ms, max. 4ms
with diode in parallel typ. 4ms, max. 6ms
Bounce time typ. 1ms, max. 3ms
Electrical endurance
at 12V / 10mA typ. 5x107 operations
at 6V / 100mA typ. 1x107 operations
at 60V / 500mA typ. 5x105 operations
at 30V / 1000mA typ. 1x106 operations
at 30V / 2000mA typ. 2x105 operations
UL contact rating 50VDC / 2A - 100W
50VAC / 2A - 100W
30VDC / 2A - 60W
Mechanical endurance typ. 100x106 operations
Coil Data
Magnetic system polarized
Coil voltage range 2 to 24VDC
Max. coil temperature 125°C
Thermal resistance < 125K/W
Coil versions, monostable
Coil Rated Operate Limiting Release Coil Rated coil
code voltage voltage Voltage voltage resistance power
VDC VDC VDC VDC Ω±10% mW
Standard version, monostable
06 3 2.10 6.60 0.30 64 140
04 4.5 3.15 9.90 0.45 145 140
0 9 5 3.50 11.00 0.50 178 140
05 6 4.20 13.20 0.60 257 140
10 9 6.30 19.80 0.90 574 140
02 12 8.40 26.40 1.20 1028 140
12 24 16.80 44.30 2.40 2880 200
13 48 33.60 72.30 4.80 7680 300
High sensitive version, monostable
High sensitive version, monostable
21 3 2.25 8.70 0.30 113 80
22 4.5 3.38 13.10 0.45 253 80
23 5 3.75 14.60 0.50 313 80
24 6 4.50 17.50 0.60 450 80
25 9 6.75 24.20 0.90 1013 80
26 12 9.00 35.00 1.20 1800 80
27 24 18.00 52.80 2.40 4114 140
28 48 36.00 77.60 4.80 8882 260
All figures are given for coil without pre-energization, at ambient temperature +23°C.
FP2 Relay
DC current [A]
DC voltage [VDC]
Max. DC load breaking capacity
Z
108-98005 Rev. E
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 11
Telecom-, Signal and RF Relays
FP2 Relay
Coil Operating Range
Unom = Nominal coil voltage
Umax = Upper limit of the operative range of
the coil voltage (limiting voltage)
Uop. min. = Lower limit of the operative range of
the coil voltage (reliable operate voltage)
For latching relays Uset min. resp. Ureset min.
Urel. min. = Lower limit of the operative range of
the coil voltage (reliable release voltage)
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
-60 -50 -40 -30 -20 -10 0102030405060708090100 110120
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
-60-50 -40-30 -20-10 0102030405060708090100 110 120
Umax. at 0 A
Umax. at 2 x 2 A
Umax. at 2 x 1 A
Unom. nominal coil voltage
Uop. min.
Urel. min.
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Umax. at 0 A
Umax. at 2 x 2 A
Umax. at 2 x 1 A
Uop. min.
Urel. min.
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Unom. nominal coil voltage
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
3.6
3.8
4
4.2
4.4
4.6
-60-50 -40-30 -20-10 0102030405060708090100 110 120 130 140
Uset min.
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Unom. nominal coil voltage
80 mW
140 mW
200 mW
260 mW
300 mW
Umax. - 5 % coil duty at 2 x 2 A
Umax. - 5 % coil duty at 0 A
Umax. - 5 % coil duty at 2 x 1 A
Umax. - 100 % coil duty at 0 A
200 mW Latching
100 mW Latching
2
06-2015, Rev. 0515
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
AXICOM
Signal
Signal Relays
FP2 Relay (Continued)
Insulation
Initial dielectric strength
between open contacts 750Vrms
between contact and coil 1000Vrms
between adjacent contacts 1000Vrms
Initial surge withstand voltage
between open contacts 1100V
between contact and coil 1500V
between adjacent contacts 1500V
Initial insulation resistance
between insulated elements >109Ω
Capacitance
between open contacts max. 4pF
between contact and coil max. 1pF
between adjacent contacts max. 1pF
Cross talk at 100MHz/900MHz -40.2dB/-22.3dB
Insertion loss at 100MHz/900MHz 0.03dB/0.25dB
Voltage standing wave ratio (VSWR)
at 100MHz/900MHz 1.01/1.07
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -40°C to +85°C
Thermal resistance <150K/W
Category of environmental protection
IEC 61810 RT III - immersion cleanable
Degree of protection, IEC 60529 IP 67, immersion cleanable
Vibration resistance (functional) 20g, 10 to 500Hz
Shock resistance (functional), half sinus 11ms 50g
Shock resistance (destructive), half sinus 0.5ms 1500g
Terminal type PCB-THT
Weight max. 2g
Resistance to soldering heat THT Peak value
IEC 60068-2-20 265°C/10s
Ultrasonic cleaning not recommended
Packaging unit tube/50 pcs., box/1000 pcs.
Coil Data (continued)
Coil versions, bistable
Coil Rated Set Max. set Reset Coil Rated coil
code voltage voltage voltage voltage resistance power
VDC VDC VDC VDC Ω±10% mW
Standard, bistable 1 coil
41 3 2.25 7.80 -2.25 90 100
42 4.5 3.38 11.70 -3.38 203 100
43 5 3.75 13.00 -3.75 250 100
44 6 4.50 15.60 -4.50 360 100
45 9 6.75 23.50 -6.75 810 100
46 12 9.00 31.30 -9.00 1440 100
47 24 18.00 47.50 -18.00 3840 150
Standard, bistable 2 coils
61 3 2.10 5.50 -2.10 45 200
62 4.5 3.15 8.30 -3.15 101 200
63 5 3.50 9.20 -3.50 125 200
64 6 4.20 11.10 -4.20 180 200
65 9 6.30 16.80 -6.30 405 200
66 12 8.40 22.10 -8.40 720 200
67 24 16.80 44.30 -16.80 1920 300
All figures are given for coil without pre-energization, at ambient temperature +23°C.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Umax upper limit of the operative range of the coil voltage (limiting voltage) when coils are
continuously energized
Uop min lower limit of the operative range of the coil voltage (reliable operate voltage)
Urel min lower limit of the operative range of the coil voltage (reliable release voltage)
108-98005 Rev. E
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 11
Telecom-, Signal and RF Relays
FP2 Relay
Coil Operating Range
Unom = Nominal coil voltage
Umax = Upper limit of the operative range of
the coil voltage (limiting voltage)
Uop. min. = Lower limit of the operative range of
the coil voltage (reliable operate voltage)
For latching relays Uset min. resp. Ureset min.
Urel. min. = Lower limit of the operative range of
the coil voltage (reliable release voltage)
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
-60 -50 -40 -30 -20 -10 0102030405060708090100 110120
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
-60-50 -40-30 -20-10 0102030405060708090100 110 120
Umax. at 0 A
Umax. at 2 x 2 A
Umax. at 2 x 1 A
Unom. nominal coil voltage
Uop. min.
Urel. min.
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Umax. at 0 A
Umax. at 2 x 2 A
Umax. at 2 x 1 A
Uop. min.
Urel. min.
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Unom. nominal coil voltage
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
3.6
3.8
4
4.2
4.4
4.6
-60-50 -40-30 -20-10 0102030405060708090100 110 120 130 140
Uset min.
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Unom. nominal coil voltage
80 mW
140 mW
200 mW
260 mW
300 mW
Umax. - 5 % coil duty at 2 x 2 A
Umax. - 5 % coil duty at 0 A
Umax. - 5 % coil duty at 2 x 1 A
Umax. - 100 % coil duty at 0 A
200 mW Latching
100 mW Latching
108-98005 Rev. E
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 11
Telecom-, Signal and RF Relays
FP2 Relay
Coil Operating Range
Unom = Nominal coil voltage
Umax = Upper limit of the operative range of
the coil voltage (limiting voltage)
Uop. min. = Lower limit of the operative range of
the coil voltage (reliable operate voltage)
For latching relays Uset min. resp. Ureset min.
Urel. min. = Lower limit of the operative range of
the coil voltage (reliable release voltage)
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
-60 -50 -40 -30 -20 -10 0102030405060708090100 110120
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
-60-50 -40-30 -20-10 0102030405060708090100 110 120
Umax. at 0 A
Umax. at 2 x 2 A
Umax. at 2 x 1 A
Unom. nominal coil voltage
Uop. min.
Urel. min.
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Umax. at 0 A
Umax. at 2 x 2 A
Umax. at 2 x 1 A
Uop. min.
Urel. min.
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Unom. nominal coil voltage
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
3.6
3.8
4
4.2
4.4
4.6
-60-50 -40-30 -20-10 0102030405060708090100 110 120 130 140
Uset min.
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Unom. nominal coil voltage
80 mW
140 mW
200 mW
260 mW
300 mW
Umax. - 5 % coil duty at 2 x 2 A
Umax. - 5 % coil duty at 0 A
Umax. - 5 % coil duty at 2 x 1 A
Umax. - 100 % coil duty at 0 A
200 mW Latching
100 mW Latching
3
06-2015, Rev. 0515
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
AXICOM
Signal
Signal Relays
FP2 Relay (Continued)
Dimensions
14.0±0.05 9.0±0.05
0.5 7.62±0.15
5.0±0.1
0.25±0.05
3.2+0.3
PCB layout
TOP view on component side of PCB
Contacts are shown in reset condition.
Both coils can be used as either set or
reset coils.
Contact position might change during
transportation and must be reset before
use.
Monostable version
Terminal assignment
TOP view on component side of PCB
Bistable version, 1-coil Bistable version, 2-coils
Packing
Tube for THT version
50 relays per tube, 1000 relays per box
4
06-2015, Rev. 0515
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
AXICOM
Signal
Signal Relays
FP2 Relay (Continued)
Product code structure Typical product code D30 02
Type
D30 Signal Relays FP2
2 form C, 2 CO
Coil
Coil code: please refer to coil versions table
Performance and coil type
0x,1x Standard version, monostable
2x High sensitive version, monostable
4x Standard version, bistable 1 coil
6x Standard version, bistable 2 coils
Product code Arrangement Perf. type Coil type Coil Part number
D3006 2 form C (2 CO) Standard Monostable 3VDC 1-1462033-3
D3004 4.5VDC 1462033-9
D3009 5VDC 1-1462033-4
D3010 9VDC 2-1462033-1
D3002 12VDC 1462033-5
D3012 24VDC 2-1462033-2
D3013 48VDC 2-1462033-6
D3021 2 form C (2 CO) High sensitive Monostable 3VDC 3-1462033-2
D3022 4.5VDC 3-1462033-3
D3023 5VDC 3-1462033-4
D3025 9VDC 3-1462033-6
D3026 12VDC 3-1462033-7
D3027 24VDC 3-1462033-8
D3041 2 form C (2 CO) Standard Bistable 1 coil 3VDC 4-1462033-0
D3042 4.5VDC 4-1462033-1
D3043 5VDC 4-1462033-2
D3046 12VDC 4-1462033-5
D3047 24VDC 4-1462033-6
D3061 2 form C (2 CO) Standard Bistable 2 coils 3VDC 4-1462033-7
D3062 4.5VDC 4-1462033-8
D3063 5VDC 4-1462033-9
D3066 12VDC 5-1462033-4
D3067 24VDC 5-1462033-6
This list represents the most common types and does not show all variants covered by this datasheet.
Other types on request.
