Aluminum Electrolytic Capacitors
All product specifications in the catalog are subject to change without notice. (CAT. 2014E1)
80
RGA Series
Features
‧105℃, 2,000 hours assured
‧105℃ standard series for general purposes
‧RoHS Compliance
‧If there is any requirement on ESR, it’s suggested to use low
ESR series instead of RGA. Please consult us for any inquiry.
Sleeve & Marking Color: Black & White
Specifications
Items Performance
Category Temperature Range 6.3~400V 450V
-40℃ ~ +105℃ -25℃ ~ +105℃
Capacitance Tolerance ±20% (at 120Hz, 20℃)
Rated voltage ≦100V ＞100V
Leakage Current (at 20℃) Time after 2 minutes after 5 minutes
Leakage Current I = 0.01CV or 3 (μA)
whichever is greater
CV ≦ 1,000
I = 0.03CV + 15(μA)
CV ＞ 1,000
I = 0.02CV + 25(μA)
Where, C = rated capacitance in μF V = rated DC working voltage in V
Tanδ (at 120 Hz, 20℃) Rated Voltage 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450
Tanδ (max) 0.23 0.20 0.16 0.14 0.12 0.10 0.09 0.08 0.12 0.14 0.17 0.20 0.25 0.25
When the capacitance exceeds 1,000μF, 0.02 shall be added every 1,000μF increase.
Impedance ratio shall not exceed the values given in the table below.
Rated Voltage 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450
Low Temperature Z(-25℃) φD＜16 433222223 6 8 12 14 16
Characteristics (at 120Hz) Impedance /Z(+20℃) φD≧16 64433333
Ratio
Z(-40℃) φD＜16 866443334 8 10 16 18 -
/Z(+20℃) φD≧16 1210888866
Test Time 2,000 Hrs
Capacitance Change Within ±20% of initial value
Endurance Tanδ Less than 200% of specified value
Leakage Current Within specified value
* The above Specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage applied with rated
ripple current for 2,000 hours at 105℃.
Test Time 1,000 Hrs
Capacitance Change With in ±20% of initial value
Shelf Life Test Tanδ Less than 200% of specified value
Leakage Current Within specified value
* The above Specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at
105℃ without voltage applied. The rated voltage shall be applied to the capacitors before the measurements for 160 ~ 450V
(Refer to JIS C 5101-4 4.1).
Ripple Current & Freq. (Hz)
Cap. (μF) 60 (50) 120 500 1k 10k up
Frequency Multipliers Under 100 0.70 1.00 1.30 1.40 1.50
100 ＜ C
≦ 1,000 0.75 1.00 1.20 1.30 1.35
1,000 up above 0.80 1.00 1.10 1.12 1.15
Diagram of Dimensions
Lead Spacing and Diameter Unit: mm
φD 5 6.3 8 10 12.5 16 18 22 25
P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10 12.5
φd0.5 0.6 0.8 1.0
αL<20: 1.5, L≧20: 2.0 2.0
β0.5
The case size of 12.5×16, 16×16, 16×20, 18×16, 18×20 and 18×25 are suitable for below diagram:
RGA
15 min 4 min
P±0.5
φd
φD+βmax
L+α max
Sleeve
Vent≧6.3φ
15 min 4 min
P±0.5
φd
φD+βmax
Sleeve
Vent L+α max
Aluminum Electrolytic Capacitors
All product specifications in the catalog are subject to change without notice. (CAT. 2014E1) 81
Dimension: φD × L(mm)
Dimension & Permissible Ripple Current Ripple Current: mA/rms at 120 Hz, 105℃
V. DC 6.3V (0J) 10V (1A) 16V (1C) 25V (1E) 35V (1V) 50V (1H) 63V (1J) 100V (2A)
μF Contents φD×L mA φD×L mA φD×L mA φD×L mA φD×L mA φD×L mA φD×L mA φD×L mA
2.2 2R2 5×11 20 5×11 30
3.3 3R3 5×11 30 5×11 31
4.7 4R7 5×11 33 5×11 36
10 100 5×11 50 6.3×11 54
22 220 5×11 78 6.3×11 86
6.3×11
8×11.5
93
99
33 330 5×11 75 5×11 90 6.3×11 100 8×11.5 130
47 470 5×11 97 5×11 90 6.3×11 120
6.3×11
8×11.5
130
141 10×12.5 165
100 101 5×11 110 6.3×11 142 6.3×11 150 8×11.5 188 10×12.5 235
10×20
12.5×16
265
290
220 221 5×11 140 6.3×11 175 6.3×11 190 8×11.5 236 8×11.5 270 10×12.5 300 10×16 335
12.5×25
16×16
440
420
330 331 6.3×11 200 8×11.5 270 8×11.5
10×12.5
310
335 10×12.5 350 10×16 410 10×20
12.5×16
510
460 16×25 620
470 471 6.3×11 230 8×11.5 290 8×11.5 310 10×12.5 380 10×16 460 10×20
12.5×16
530
425
12.5×20
16×16
640
665
16×31.5
18×25
715
745
1,000 102 8×11.5 380 10×12.5 460 10×16 560 10×20
12.5×16
680
590
12.5×20
16×16
810
720
12.5×25
16×20
950
830 16×25 930 18×40 1,275
2,200 222 10×16 690 10×20 760 12.5×16 780 12.5×25 1,110 16×25
18×20
1,260
1,110
16×35.5
18×31.5
1,470
1,520 18×40 2,280 25×45 2,400
3,300 332 10×20
12.5×16
840
850
12.5×20
16×16
1,100
940
12.5×25
16×16
1,170
950
16×25
18×20
1,440
1,220
16×31.5
18×25
1,420
1,570 18×35.5 1,770 22×40 2,510
4,700 472 12.5×20
16×16
1,090
1,010
12.5×25
16×16
1,260
1,060
16×20
18×16
1,185
1,290
16×31.5
18×25
1,650
1,550 18×35.5 1,900 22×40 2,340 25×40 3,000
6,800 682 12.5×25
16×20
1,460
1,190 16×20 1,270 16×31.5
18×20
1,930
1,585
16×40
18×35.5
2,000
2,160 18×40 2,250 25×40 2,530
10,000 103 16×20 1,340
16×31.5
18×25
2,220
1,800
16×35.5
18×31.5
2,210
2,330
22×40
18×45
2,720
2,410
15,000 153 16×31.5
18×25
2,365
2,290
18×31.5
16×35.5
2,620
2,590 18×40 2,950 25×40 3,200
22,000 223 16×40
18×35.5
2,800
2,930 18×40 3,230 22×40 3,460
33,000 333 18×45 3,080 22×40 4,090 25×45 4,500
V. DC 160V (2C) 200V (2D) 250V (2E) 350V (2V) 400V (2G) 450V (2W)
μF Contents φD×L mA φD×L mA φD×L mA φD×L mA φD×L mA φD×L mA
1 010 6.3×11 21 8×11.5 27
2.2 2R2 6.3×11 30 6.3×11 35 6.3×11 35 8×11.5 39 8×11.5 39
3.3 3R3 6.3×11 39 6.3×11 40 8×11.5 43 8×11.5 45 8×11.5 45
4.7 4R7 6.3×11 43 8×11.5 45
8×11.5
10×12.5
45
55
8×11.5
10×12.5
50
55
8×11.5
10×12.5
50
55
10 100 8×11.5 65 8×11.5 65 10×12.5 92 10×16 95 10×16 95 10×20 105
22 220 10×12.5 110 10×16 140 10×16 140 12.5×20 220 12.5×20 160 12.5×20 160
33 330 10×16 150 10×20 170 12.5×16 175 12.5×25
16×16
215
205 16×20 225 16×20
18×16
225
220
47 470 10×20 195 12.5×16 215
12.5×20
16×16
230
245 16×20 255 16×25 295 16×25
18×20
280
285
68 680 12.5×20 275 12.5×20
16×16
265
290 16×20 320 18×25
16×31.5
360
370
18×25
16×31.5
360
375
16×35.5
18×31.5
400
420
100 101 12.5×25 355 16×20
18×16
365
360
16×25
18×20
425
415
18×31.5
16×35.5
460
430 18×35.5 540 18×40 560
150 151 16×25 470 18×20 510
16×31.5
18×25
550
535 18×40 600 22×40 730 22×40 770
220 221 16×31.5 660 18×31.5 750 18×35.5 760 25×40
22×45
865
850 22×45 930
330 331 18×35.5 820 18×40 965 22×40 1,140 25×45 1,070
470 330 22×40 1,130 22×40 1,130 25×40 1,325
Part Numbering System
RGA series 470μF ±20% 6.3V Bulk Package Gas Type 6.3φ×11L Pb-free and PET
coating case
RGA 471 M 0J BK - 0611
Series Capacitance
Capacitance
Tolerance
Rated
Voltage
Lead Configuration
& Package
Rubbe
r
Type Case Size Lead Wire and
Coating Type
Note: For more details, please refer to “Part Numbering System (Radial Type)” on page 10.
RGA
