http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
1
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
2010.9.9
Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Multilayer Type
0.5±0.05
(in mm)
1.0±0.05
0.5±0.05
0.25±0.1 Polarity Marking
Chip Inductor (Chip Coil) for High Frequency Multilayer Type
LQG15HS Series (0402 Size)
■ Dimensions ■ Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 10000
J330mm Paper Tape 50000
BBulk(Bag) 1000
■ Rated Value (p: packaging code)
Part Number Inductance Test Frequency Rated Current Max. of DC resistance Q (min.) Test Frequency Self Resonance Frequency (min.)
LQG15HS1N0S02p
1.0nH±0.3nH 100MHz 300mA 0.07ohm 8100MHz 10000MHz
LQG15HS1N1S02p
1.1nH±0.3nH 100MHz 300mA 0.09ohm 8100MHz 6000MHz
LQG15HS1N2S02p
1.2nH±0.3nH 100MHz 300mA 0.09ohm 8100MHz 6000MHz
LQG15HS1N3S02p
1.3nH±0.3nH 100MHz 300mA 0.09ohm 8100MHz 6000MHz
LQG15HS1N5S02p
1.5nH±0.3nH 100MHz 300mA 0.1ohm 8100MHz 6000MHz
LQG15HS1N6S02p
1.6nH±0.3nH 100MHz 300mA 0.1ohm 8100MHz 6000MHz
LQG15HS1N8S02p
1.8nH±0.3nH 100MHz 300mA 0.1ohm 8100MHz 6000MHz
LQG15HS2N0S02p
2.0nH±0.3nH 100MHz 300mA 0.1ohm 8100MHz 6000MHz
LQG15HS2N2S02p
2.2nH±0.3nH 100MHz 300mA 0.12ohm 8100MHz 6000MHz
LQG15HS2N4S02p
2.4nH±0.3nH 100MHz 300mA 0.15ohm 8100MHz 6000MHz
LQG15HS2N7S02p
2.7nH±0.3nH 100MHz 300mA 0.15ohm 8100MHz 6000MHz
LQG15HS3N0S02p
3.0nH±0.3nH 100MHz 300mA 0.17ohm 8100MHz 6000MHz
LQG15HS3N3S02p
3.3nH±0.3nH 100MHz 300mA 0.17ohm 8100MHz 6000MHz
LQG15HS3N6S02p
3.6nH±0.3nH 100MHz 300mA 0.18ohm 8100MHz 6000MHz
LQG15HS3N9S02p
3.9nH±0.3nH 100MHz 300mA 0.18ohm 8100MHz 6000MHz
LQG15HS4N3S02p
4.3nH±0.3nH 100MHz 300mA 0.18ohm 8100MHz 6000MHz
LQG15HS4N7S02p
4.7nH±0.3nH 100MHz 300mA 0.18ohm 8100MHz 6000MHz
LQG15HS5N1S02p
5.1nH±0.3nH 100MHz 300mA 0.2ohm 8100MHz 5300MHz
LQG15HS5N6S02p
5.6nH±0.3nH 100MHz 300mA 0.2ohm 8100MHz 4500MHz
LQG15HS6N2S02p
6.2nH±0.3nH 100MHz 300mA 0.22ohm 8100MHz 4500MHz
LQG15HS6N8J02p
6.8nH±5% 100MHz 300mA 0.24ohm 8100MHz 4500MHz
LQG15HS7N5J02p
7.5nH±5% 100MHz 300mA 0.24ohm 8100MHz 4200MHz
LQG15HS8N2J02p
8.2nH±5% 100MHz 300mA 0.24ohm 8100MHz 3700MHz
Operating Temperature Range: -55°C to +125°C
Only for reflow soldering.
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
2010.9.9
Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Multilayer Type
Part Number Inductance Test Frequency Rated Current Max. of DC resistance Q (min.) Test Frequency Self Resonance Frequency (min.)
LQG15HS9N1J02p
9.1nH±5% 100MHz 300mA 0.26ohm 8100MHz 3400MHz
LQG15HS10NJ02p
10nH±5% 100MHz 300mA 0.26ohm 8100MHz 3400MHz
LQG15HS12NJ02p
12nH±5% 100MHz 300mA 0.28ohm 8100MHz 3000MHz
LQG15HS15NJ02p
15nH±5% 100MHz 300mA 0.32ohm 8100MHz 2500MHz
LQG15HS18NJ02p
18nH±5% 100MHz 300mA 0.36ohm 8100MHz 2200MHz
LQG15HS22NJ02p
22nH±5% 100MHz 300mA 0.42ohm 8100MHz 1900MHz
LQG15HS27NJ02p
27nH±5% 100MHz 300mA 0.46ohm 8100MHz 1700MHz
LQG15HS33NJ02p
33nH±5% 100MHz 200mA 0.58ohm 8100MHz 1600MHz
LQG15HS39NJ02p
39nH±5% 100MHz 200mA 0.65ohm 8100MHz 1200MHz
LQG15HS47NJ02p
47nH±5% 100MHz 200mA 0.72ohm 8100MHz 1000MHz
LQG15HS56NJ02p
56nH±5% 100MHz 200mA 0.82ohm 8100MHz 800MHz
LQG15HS68NJ02p
68nH±5% 100MHz 180mA 0.92ohm 8100MHz 800MHz
LQG15HS82NJ02p
82nH±5% 100MHz 150mA 1.2ohm 8100MHz 700MHz
LQG15HSR10J02p
100nH±5% 100MHz 150mA 1.25ohm 8100MHz 600MHz
LQG15HSR12J02p
120nH±5% 100MHz 150mA 1.3ohm 8100MHz 600MHz
LQG15HSR15J02p
150nH±5% 100MHz 140mA 2.99ohm 8100MHz 550MHz
LQG15HSR18J02p
180nH±5% 100MHz 130mA 3.38ohm 8100MHz 500MHz
LQG15HSR22J02p
220nH±5% 100MHz 120mA 3.77ohm 8100MHz 450MHz
LQG15HSR27J02p
270nH±5% 100MHz 110mA 4.94ohm 8100MHz 400MHz
0
20
40
60
80
100 1000 10000
Frequency (MHz)
Q
120nH
1.0nH
3.3nH
10nH
22nH
56nH
270nH
1
0.1
10
100
1000
100 1000 10000
Frequency (MHz)
Inductance (nH)
3.3nH
1.0nH
10nH
22nH
56nH
120nH
270nH
Operating Temperature Range: -55°C to +125°C
Only for reflow soldering.
■ Q-Frequency Characteristics (Typ.) ■ Inductance-Frequency Characteristics (Typ.)
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
■ !Caution/Notice
