E L E C T R O N I C S I N C .
Radial Lead Power Inductor
TEL: (818) 892-0761
FAX: (818) 894-5791
http://www.pca.com
PCA ELECTRONICS, INC.
16799 SCHOENBORN ST.
NORTH HILLS, CA 91343
• Virtually no limit on V µSec. as long as max. RMS Current Limit
and Temperature Rise Limit are not exceeded
• Low cost Robust construction to withstand most SMT processes
• Low loss material ensures operation in high frequency
switching converters, such as Buck, Boost or as output
averaging filter inductor
• Also suitable for use in high quality filter applications
• Add “-LF” after part number for Lead-Free
EPI RL30 & RL30-LF Series
Product performance is limited to specified parameters. Data is subject to change without prior notice.
Primary Specification
Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25
CSIXXXXXXRL30 & -LFa Rev. 5 8/3/05 FT
1.0 ± 20%
1.5 ± 20%
2.2 ± 20%
3.3 ± 20%
4.7 ± 20%
6.8 ± 20%
10 ± 20%
12 ± 20%
15 ± 10%
18 ± 10%
22 ± 10%
27 ± 10%
33 ± 10%
39 ± 10%
47 ± 10%
56 ± 10%
68 ± 10%
82 ± 10%
100 ± 10%
120 ± 10%
150 ± 10%
180 ± 10%
Inductance
(µH)
@ 0 Adc
DCR
(Ω Max.)
0.013
0.016
0.021
0.025
0.030
0.035
0.05
0.06
0.07
0.08
0.09
0.11
0.13
0.14
0.15
0.18
0.20
0.24
0.28
0.36
0.42
0.57
I dc
(mA Max.)
10000
8500
6500
5500
4300
3700
2900
2500
2200
1900
1800
1700
1500
1300
1300
1200
1100
1000
890
810
720
660
Test Frequency
(MHz Typ.)
7.96
7.96
7.96
7.96
7.96
7.96
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
1.0
1.0
1.0
1.0
Part Number
(add “A” for Heat Shrink Tube)
EPI1L0103RL30
EPI1L5852RL30
EPI2L2652RL30
EPI3L3552RL30
EPI4L7432RL30
EPI6L8372RL30
EPI100292RL30
EPI120252RL30
EPI150222RL30
EPI180192RL30
EPI220182RL30
EPI270172RL30
EPI330152RL30
EPI390132RL30
EPI470132RL30
EPI560122RL30
EPI680112RL30
EPI820102RL30
EPI101891RL30
EPI121811RL30
EPI151721RL30
EPI181661RL30
Note :
1. Temperature Rise : 40°C Max. @ Idc
2. Inductance Drop : 10% Max. @ Idc
3. Leads are pre-tinned
Package RL30
(Without Heat Shrink Tube) Package RL30A
(With Heat Shrink Tube)
Notes :
1. Assembly Process
(Solder Composition)
2. Peak Solder Rating
(per JESD22-B106-B)
3. Weight
4. Packaging Information (Tray)
(Assembly Solder)
EPIXXXXXXRL30-LF
SnAg
260°C
10 (+2/-0) seconds
TBD grams
TBD pieces/tray
EPIXXXXXXRL30
260°C
10 (+2/-0) seconds
TBD grams
TBD pieces/tray
SnPb
E L E C T R O N I C S I N C .
Radial Lead Power Inductor
TEL: (818) 892-0761
FAX: (818) 894-5791
http://www.pca.com
PCA ELECTRONICS, INC.
16799 SCHOENBORN ST.
NORTH HILLS, CA 91343
• Virtually no limit on V µSec. as long as max. RMS Current Limit
and Temperature Rise Limit are not exceeded
• Low cost Robust construction to withstand most SMT processes
• Low loss material ensures operation in high frequency
switching converters, such as Buck, Boost or as output
averaging filter inductor
• Also suitable for use in high quality filter applications
• Add “-LF” after part number for Lead-Free
EPI RL30 & RL30-LF Series
Product performance is limited to specified parameters. Data is subject to change without prior notice.
Primary Specification
Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25
CSIXXXXXXRL30 & -LFb Rev. 5 8/3/05 FT
220 ± 10%
270 ± 10%
330 ± 10%
390 ± 10%
470 ± 10%
560 ± 10%
680 ± 10%
820 ± 10%
1000 ± 10%
1200 ± 10%
1500 ± 10%
1800 ± 10%
2200 ± 10%
2700 ± 10%
3300 ± 10%
3900 ± 10%
4700 ± 10%
5600 ± 10%
6800 ± 10%
8200 ± 10%
10,000 ± 10%
Inductance
(µH)
@ 0 Adc
DCR
(Ω Max.)
0.63
0.88
1.05
1.17
1.34
1.72
1.96
2.56
2.94
4.04
4.70
5.05
6.25
8.72
10.6
14.2
16.7
18.7
21.8
28.7
33.0
I dc
(mA Max.)
570
510
460
440
410
360
330
300
270
240
220
200
180
160
150
140
120
110
100
93
84
Test Frequency
(MHz Typ.)
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Part Number
(add “A” for Heat Shrink Tube)
EPI221571RL30
EPI271511RL30
EPI331461RL30
EPI391441RL30
EPI471411RL30
EPI561361RL30
EPI681331RL30
EPI821301RL30
EPI102271RL30
EPI122241RL30
EPI152221RL30
EPI182201RL30
EPI222181RL30
EPI272161RL30
EPI332151RL30
EPI392141RL30
EPI472121RL30
EPI562111RL30
EPI682101RL30
EPI822930RL30
EPI103840RL30
Note :
1. Temperature Rise : 40°C Max. @ Idc
2. Inductance Drop : 10% Max. @ Idc
3. Leads are pre-tinned
Package RL30
(Without Heat Shrink Tube) Package RL30A
(With Heat Shrink Tube)
Notes :
1. Assembly Process
(Solder Composition)
2. Peak Solder Rating
(per JESD22-B106-B)
3. Weight
4. Packaging Information (Tray)
(Assembly Solder)
EPIXXXXXXRL30-LF
SnAg
260°C
10 (+2/-0) seconds
TBD grams
TBD pieces/tray
EPIXXXXXXRL30
260°C
10 (+2/-0) seconds
TBD grams
TBD pieces/tray
SnPb
