www.rohm.com
©2011 ROHM Co., Ltd. A l l ri ghts reserved.
Switching Diode
1SS380
Applications Dimensions (Unit : mm) Land size figure (Unit : mm)
High speed switching
Features
1)Ultra small mold type. (UMD2)
2)High reliability
Construction
Silicon epitaxial planar Structure
Taping dimensions (Unit : mm)
Absolute maximum ratings (Ta=25C)
Symbol Unit
VRM V
VRV
IFM mA
Io mA
Isurge mA
Tj C
Tstg C
Electrical characteristics (Ta=25C)
Symbol Min. Typ. Max. Unit Conditions
VF- - 1.2 V IF=100mA
IR- - 0.01 μAVR=20V
Ct - - 5.0 pF VR=0.5V , f=1MHz
Parameter Limits
Reverse voltage (repetitive peak) 40
Reverse voltage (DC) 35
Forward current 225
Average rectified forward current 100
Surge current (t=1s) 400
Junction temperature 150
Storage temperature 55 to 150
Parameter
Capacitance between terminals
Forward voltage
Reverse current
ROHM : UMD2
JEITA : SC-90/A
JEDEC : SOD-323
dot (year week factory)
0.3±0.05
0.7±0.2
    0.1
0.1±0.1
    0.05
1.7±0.1
2.5±0.2
1.25±0.1
UMD2
2.1
0.8MIN.
0.9MIN.
4.0±0.1 2.0±0.05 φ1.50.05
1.40±0.1 4.0±0.1 φ1.05
2.75
3.5±0.05 1.75±0.1
8.0±0.2
0.3±0.1
1.0.1
2.8±0.1
1/2 2011.08 - Rev.C
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
Data Sheet
1SS380  
0
5
10
15
20
25
30
1
10
100
1000
0.001 0.01 0.1 1 10 100 1000
Rth(j-a)
Rth(j-c)
1ms
IM=1mA I
F
=50mA
300us
time
Mounted on epoxy board
0
5
10
15
20
25
30
0.1 1 10 100
t
Ifsm
0
5
10
15
20
110100
8.3ms
Ifsm
1cyc
8.3ms
0
1
2
3
4
5
0
5
10
15
8.3ms
Ifsm 1cyc
0
1
2
3
4
5
6
7
8
9
10
0
50
100
150
200
920
930
940
950
960
970
0.1
1
10
0102030
0.1
1
10
100
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2
Ta=150
0.0001
0.001
0.01
0.1
1
10
100
0 5 10 15 20
Ta=150
FORWARD VOLTAGE : V
F
(V)
V
F
-I
F
CHARACT ERISTICS
FORWARD CURRENT : I
F
(mA)
REVERSE CURRENT : I
R
(nA)
REVERSE VOLTAGE : V
R
(V)
V
R
-I
R
CHARACTERISTICS
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
REVERSE VOLTAGE : V
R
(V)
V
R
-Ct CHARACTERISTICS
V
F
DISPERSION MAP
FORWARD VOLTAGE : V
F
(mV)
REVERSE CURRENT: I
R
(pA)
I
R
DISPERSION MAP
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
Ct DISPERSION MAP
I
FSM
DISPERSION MAP
PEAK SUR GE
FORWARD CURRENT : I
FSM
(A)
PEAK SURGE
FORWARD CURRENT : I
FSM
(A)
NUMBER OF CYCLES
I
FSM
-CYCLE CHAR ACTERIST IC S
PEAK SURGE
FORWARD CURRENT : I
FSM
(A)
TIME:t(ms)
I
FSM
-t CHARACTERIST ICS TIME:t(s)
Rth-t CHARACTERISTICS
TRANSIENT
THAERMAL IMPEDANCE : Rth (/W)
trr DISPERSION MAP
REVERSE RECOVERY TIME:trr(ns)
ELECTROSTATIC
DDISCHARGE TEST ESD(KV)
ESD DISPERSION MAP
f=1MHz
AVE:940.0mV
Ta=25
I
F
=100mA
n=30pcs
Ta=25
V
R
=20V
n=30pcs
AVE:40.51pA AVE:3.24pF
Ta=25
f=1MHz
V
R
=0V
n=10pcs
AVE:9.60A
AVE:1.20ns
Ta=25
V
R
=6V
I
F
=10mA
RL=100
Irr=0.1*I
R
n=10pcs
C=200pF
R=0
AVE:3.70kV
C=100pF
R=1.5k
AVE:5.1kV
Ta=25
Ta=25
Ta=125
Ta=75
Ta=25
Ta=125
Ta=75Ta=25
2/2 2011.08 - Rev.C
R1120
A
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
Notice
ROHM Customer Support System
http://www.rohm.com/contact/
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specied herein is subject to change for improvement without notice.
The content specied herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specied in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specied herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specied in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, ofce-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specied in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, re or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, re control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specied herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.