Anforderungsstufe class 3 -0,1 XXXXXXX ERNI RC 2 EN Zone fur durchkontaktierte Locher 0,6 0,05 2 13,45 -0,1 15,4 Date Code 2 compliant zone for thru hole 0,6 0,05 4x2=8 10 x 2 = 20 11,3 0,1 Ebene - Level 3 9,8 0,1 Ebene - Level 2 8,3 0,1 Ebene - Level 1 4,5 0,3 3,7 0,3 A 1 max. P2 B C D E F K L M N P Q R S T U V W X 3,7 25 max. P1 R3 R2 Bestuckungsplan - contact layout R1 11 10 9 8 7 6 5 4 3 2 1 B B B B B - B B B B B - B B B B B - Lochbild fur Leiterplatte (Bestuckungsseite) B B B B B - B B B B B - B B B B B - B B B B B - B B B B B - B B B B B - P3 B B B B B - z a b c d e f P4 Y Z B B B B B - 1,8 0,1 2,1 0,1 13 0,2 14,5 0,2 16 0,2 5,3 0,1 6,8 0,1 8,3 0,1 Board hole pattern (Component mounting side) alle Locher all holes 10 x 2 = (20) 0,05 2 +0,05 1) nicht durchkontaktiert not plated thru 2 3 1) 0,6 0,05 0,6 0,05 Durchmesser des metallisierten Loches Diameter of finished plated-through hole 0,7 0,02 Bohrungsdurchmesser des Loches 0,7 0,02 Diameter of drilled hole 2 Metal plating of plated-through hole see drawing 114406 b c d e Fehlende Mae und Angaben nach IEC 61076-4-101 Missing information and dimensions per 61076-101 f 11 1 Information: P2 Level 2 siehe Bestuckungsplan/ see contact layout Anforderungsstufe 2 / class 2 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 4 x 2 = (8) Schichtaufbau im metallisierten Loch siehe Zeichnung 114406 z a Tolerances Information: 2:1 Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. ERmet Messerleiste C ERmet Male Wide Type C 100100760004 www.ERNI.com d 04.07.2012 Index Date Class ERMC K A3