Power Transistors 2SA0794 (2SA794), 2SA0794A (2SA794A) Silicon PNP epitaxial planar type For low-frequency output driver Complementary to 2SC1567, 2SC1567A Unit: mm 8.0+0.5 -0.1 3.20.2 3.050.1 3.80.3 1.90.1 * High collector-emitter voltage (Base open) VCEO * Optimum for the driver stage of low-frequency and 40 W to 100 W output amplifier * TO-126B package which requires no insulation plate for installation to the heat sink 16.01.0 Features 11.00.5 3.160.1 Absolute Maximum Ratings Ta = 25C Parameter Collector-base voltage (Emitter open) Symbol 2SA0794 Rating -100 VCBO Unit 0.750.1 V -120 2SA0794A -100 0.50.1 4.60.2 1 2 0.50.1 1: Emitter 2: Collector 3: Base TO-126B-A1 Package 3 V Collector-emitter voltage 2SA0794 (Base open) 2SA0794A VCEO Emitter-base voltage (Collector open) VEBO -5 V Collector current IC - 0.5 A Peak collector current ICP -1 A Collector power dissipation PC 1.2 W Junction temperature Tj 150 C Storage temperature Tstg -55 to +150 C 1.760.1 2.30.2 -120 Electrical Characteristics Ta = 25C 3C Parameter Symbol 2SA0794 Collector-emitter voltage (Base open) Conditions VCEO IC = -100 A, IB = 0 VEBO IE = -1 A, IC = 0 VCE = -10 V, IC = -150 mA 90 VCE = -5 V, IC = -500 mA 50 Collector-emitter saturation voltage VCE(sat) IC = -500 mA, IB = -50 mA Base-emitter saturation voltage VBE(sat) IC = -500 mA, IB = -50 mA hFE1 Transition frequency * fT Collector output capacitance (Common base, input open circuited) Max Unit V -5 hFE2 Forward current transfer ratio Typ -120 2SA0794A Emitter-base voltage (Collector open) Min -100 Cob V 220 - 0.2 - 0.4 V - 0.85 -1.20 V 100 VCB = -10 V, IE = 50 mA, f = 200 MHz 120 VCB = -10 V, IE = 0, f = 1 MHz 20 MHz 30 pF Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. 2. *: Rank classification Rank Q R hFE1 90 to 155 130 to 220 Note) The part numbers in the parenthesis show conventional part number. Publication date: February 2003 SJD00001BED 1 2SA0794, 2SA0794A PC Ta IC VCE TC = 25C - 0.8 - 0.6 0.8 -4 mA -2 mA - 0.4 0.4 - 0.2 0 - 0.6 40 80 120 - 0.2 -2 0 -4 -6 -8 -10 -6 -8 -10 -12 -14 VBE(sat) IC Collector current IC (A) -25C 75C - 0.1 - 0.2 - 0.4 - 0.6 - 0.8 -1.0 IC / IB = 10 IC / IB = 10 -1 TC = 100C 25C -25C - 0.1 - 0.2 - 0.01 - 0.01 Base-emitter voltage VBE (V) - 0.1 -1 100C 25C - 0.1 - 0.01 - 0.01 fT I E TC = 100C 25C -25C - 0.1 Collector current IC (A) -1 VCB = -10 V f = 200 MHz TC = 25C 160 120 80 40 0 1 10 Emitter current IE (mA) SJD00001BED -1 Cob VCB Collector output capacitance C (pF) (Common base, input open circuited) ob Transition frequency fT (MHz) 1 000 - 0.1 Collector current IC (A) 200 VCE = -10 V TC = -25C -1 Collector current IC (A) hFE IC Forward current transfer ratio hFE -4 VCE(sat) IC - 0.3 2 -2 0 IC VBE - 0.4 10 - 0.01 0 -12 Base current IB (mA) Ta = 125C 100 - 0.4 Collector-emitter voltage VCE (V) VCE = -10 V 0 - 0.6 Ambient temperature Ta (C) - 0.5 0 0 160 - 0.8 Base-emitter saturation voltage VBE(sat) (V) 0 VCE = -10 V TC = 25C -1.0 Collector current IC (A) Collector current IC (A) 1.2 -1.2 -18 mA IB = -20 mA -16 mA -14 mA -12 mA -10 mA -8 mA -6 mA -1.0 Collector-emitter saturation voltage VCE(sat) (V) Collector power dissipation PC (W) IC I B -1.2 1.6 100 50 IE = 0 f = 1 MHz TC = 25C 40 30 20 10 0 -1 -10 -100 Collector-base voltage VCB (V) 2SA0794, 2SA0794A ICEO Ta 105 ICBO Ta 104 VCE = 20 V Safe operation area -10 VCB = -20 V Single pulse TC = 25C 104 103 102 Collector current IC (A) ICBO (Ta) ICBO (Ta = 25C) ICEO (Ta) ICEO (Ta = 25C) 103 102 0 40 80 120 160 Ambient temperature Ta (C) 200 1 IC t=1s - 0.1 t = 10 ms - 0.01 10 10 1 ICP -1 0 40 80 120 Ambient temperature Ta (C) SJD00001BED 160 - 0.001 -1 -10 -100 -1 000 Collector-emitter voltage VCE (V) 3 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2002 JUL