Silicon RF Power Semiconductors
RD06HVF1
RoHS Compliance, Silicon MOSFET Power Transistor 175MHz,6W
RD06HVF1 6 Jul 2010
1/9
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
DESCRIPTION
RD06HVF1 is a MOS FET type transistor specifically
designed for VHF RF power amplifiers applications.
FEATURES
High power gain:
Pout>6W, Gp>13dB @Vdd=12.5V,f=175MHz
APPLICATION
For output stage of high power amplifiers in
VHF band mobile radio sets.
RoHS COMPLIANT
RD06HVF1-101 is a RoHS compliant products.
RoHS compliance is indicate by the letter “G” after the lot
marking.
This product include the lead in high melting temperature type solders.
How ever,it applicable to the following exceptions of RoHS Directions.
1.Lead in high melting temperature type solders(i.e.tin-lead solder alloys containing more than85% lead.)
OUTLINE DRAWING
note:
Torelance of no designation means typical value.
Dimension in mm.
0.5+0.10/-0.15
PINS
1:GATE
2:SOURCE
3:DRAIN
1.3+/-0.4
12.3MIN
2.5
9.5MAX
5deg
2.5
4.5+/-0.5
3.1+/-0.6
3.6+/-0.2
0.8+0.10/-0.15
1.2+/-0.4
2
9.1+/-0.7
12.3+/-0.6
9+/-0.4
4.8MAX
1
3.2+/-0.4
3
2
Silicon RF Power Semiconductors
RD06HVF1
RoHS Compliance, Silicon MOSFET Power Transistor 175MHz,6W
RD06HVF1 6 Jul 2010
2/9
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
ABSOLUTE MAXIMUM RATINGS
(Tc=25°C UNLESS OTHERWISE NOTED)
SYMBOL PARAMETER CONDITIONS RATINGS UNIT
VDSS Drain to source voltage Vgs=0V 50 V
VGSS Gate to source voltage Vds=0V +/- 20 V
Pch Channel dissipation Tc=25°C 27.8 W
Pin Input power Zg=Zl=50Ω 0.6 W
ID Drain current - 3 A
Tch Channel temperature - 150 °C
Tstg Storage temperature - -40 to +150 °C
Rth j-c Thermal resistance junction to case 4.5 °C/W
Note 1: Above parameters are guaranteed independently.
ELECTRICAL CHARACTERISTICS
(Tc=25°C, UNLESS OTHERWISE NOTED)
LIMITS UNIT
SYMBOL PARAMETER CONDITIONS MIN TYP MAX.
IDSS Zero gate voltage drain current VDS=17V, VGS=0V - - 10 uA
IGSS Gate to source leak current VGS=10V, VDS=0V - - 1 uA
VTH Gate threshold Voltage VDS=12V, IDS=1mA 1.9 - 4.9 V
Pout Output power 6 10 - W
ηD Drain efficiency
VDD=12.5V, Pin=0.3W,
f=175MHz, Idq=0.3A 60 65 - %
Load VSWR tolerance VDD=15.2V,Po=6W(Pin Control)
f=175MHz,Idq=0.3A,Zg=50Ω
Load VSWR=20:1(All Phase)
No destroy -
Note : Above parameters , ratings , limits and conditions are subject to change.
Silicon RF Power Semiconductors
RD06HVF1
RoHS Compliance, Silicon MOSFET Power Transistor 175MHz,6W
RD06HVF1 6 Jul 2010
3/9
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
TYPICAL CHARACTERISTICS
CHANNNEL DISSIPATI ON VS.
AMBIENT TEMPERATURE
0
10
20
30
40
50
0 40 80 120 160 200
AMBIENT TEMPERATURE Ta(°C)
CHANNEL DISSIPATION
Pch(W)
Vgs- Ids CHARACTERI STICS
0
1
2
3
4
5
0246810
Vgs(V)
Ids(A)
Ta=+25°C
Vds=10V
Vds VS. Crss CHARACTERISTICS
0
2
4
6
8
10
0102030
Vds(V)
Crss(pF)
Ta=+25°C
f=1MHz
Vds VS. Coss CHARACTERISTICS
0
20
40
60
80
100
0102030
Vds(V)
Coss(pF)
Ta=+25°C
f=1MHz
Vds VS. Ciss CHARACTERISTICS
0
10
20
30
40
50
60
0102030
Vds(V)
Ciss(pF)
Ta=+25°C
f=1MHz
Vds-Ids CHARACTERISTICS
0
1
2
3
4
0246810
Vds(V)
Ids(A)
Ta=+25°C
Vgs=9V
Vgs=8V
Vgs=7V
Vgs=6V
Vgs=5V
Vgs=10V
Silicon RF Power Semiconductors
RD06HVF1
RoHS Compliance, Silicon MOSFET Power Transistor 175MHz,6W
RD06HVF1 6 Jul 2010
4/9
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
TYPICAL CHARACTERISTICS

Vgs-Ids CHARACTORISTICS 2
0
1
2
3
4
5
0246810
Vgs(V)
Ids ( A ) , GM( S)
Vds=10V
Tc=-25~+75°C
-25°C
+75°C
+25°C
Vgs-
g
m CHARACTORIS TICS
0.0
0.5
1.0
1.5
2.0
0123456789
Vgs(V)
g
m( S)
Vds=10V
Tc=-25~+75°C
-25°C
+75°C
+25°C
Pin-Po CHARACTERISTICS
0
10
20
30
40
50
0 5 10 15 20 25 30
Pin ( dBm)
Po(dBm) , Gp(dB) , Idd(A)
0
20
40
60
80
100
ηd(%)
Ta=+ 25°C
f= 175MHz
Vdd=12.5V
Idq= 0.3A
Po
ηｄ
Ｉｄｄ
Gp
Pin-Po CHARACTERISTICS
0
2
4
6
8
10
12
14
0.0 0.1 0.2 0.3 0.4 0.5 0.6
Pin ( W)
Pout(W) , Idd(A)
30
40
50
60
70
80
90
100
ηd(%)
Po
ηd
Idd
Ta=25°C
f= 175MHz
Vdd=12.5V
Idq= 0.3A
Vdd-Po CHARACTERISTICS
0
2
4
6
8
10
12
14
16
468101214
Vdd(V)
Po( W)
0
1
2
3
4
Idd( A )
Idd
Ta=25°C
f= 175MH z
Pin= 0.3W
Idq= 0.3A
Zg=ZI=50 ohm
Po
Silicon RF Power Semiconductors
RD06HVF1
RoHS Compliance, Silicon MOSFET Power Transistor 175MHz,6W
RD06HVF1 6 Jul 2010
5/9
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
TEST CIRCUIT(f=175MHz)
L6:4Turns,I.D6mm,D1.6mm P=1 silver plateted copper wire
75
92
10pF
72
70
30pF5pF
9.1kOHM
L6
52
25
7
100
87
micro strip line width=4.2mm/50OHM,er:2.7,t=1.6mm
Note:Board material-Teflon substrate
C1:2200pF 10uF in parallel
C2
RF-OUT
C1
L4:1Turns,I.D6mm,D1.6mm silver plateted copper wire
100OHM
Vgg Vdd
RF-IN
300pF
Dimensions:mm
82pF
5
92
55
8.2kOHM
L4
C2:2200pF*2 in parallel
C3
C3:2200pF,330uF in parallel
L5
L5:4Turns,I.D6mm,D1.6mm P=1 silver plateted copper wire
175MHz
RD06HVF1
30
33
100
L1 L3L2
300pF
L1-L3:6Turns,I.D1.6mm,D0.4mm enameled copper wire
Silicon RF Power Semiconductors
RD06HVF1
RoHS Compliance, Silicon MOSFET Power Transistor 175MHz,6W
RD06HVF1 6 Jul 2010
6/9
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
INPUT/OUTPUT IMPEDANCE VS.FREQUENCY CHARACTERISTICS
Zin , Zout
f Zin Zout
(MHz) (ohm) (ohm) Conditions
175 4.25-j25.6 5.64-j1.05
Po=10W, Vdd=12.5V,Pin=0.3W
f=175MHZo
f=135MHzZo
f=175MHz Zout*
f=175MHz Zin*
Zo=50ohm
Silicon RF Power Semiconductors
RD06HVF1
RoHS Compliance, Silicon MOSFET Power Transistor 175MHz,6W
RD06HVF1 6 Jul 2010
7/9
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
RD06HV F1 S - PARAMETER DATA (@Vdd=12.5V, Id=500mA)
Freq.
[MHz] (mag) (ang) (mag) (ang) (mag) (ang) (mag) (ang)
10 0.985 -18.8 34.407 165.9 0.008 76.2 0.826 -17.3
30 0.900 -50.4 30.427 143.3 0.021 59.4 0.767 -43.6
50 0.799 -74.4 24.979 126.1 0.029 43.2 0.677 -65.0
100 0.667 -109.6 15.565 100.7 0.032 27.3 0.547 -96.8
150 0.636 -129.0 10.953 85.1 0.032 23.1 0.523 -113.4
200 0.630 -140.1 8.194 73.7 0.029 25.3 0.528 -124.7
250 0.645 -148.2 6.528 63.9 0.027 34.5 0.561 -132.7
300 0.663 -155.0 5.315 55.2 0.027 49.1 0.588 -139.6
350 0.685 -160.7 4.437 47.4 0.031 61.8 0.622 -145.9
400 0.708 -165.9 3.771 39.9 0.039 71.0 0.657 -151.7
450 0.729 -170.8 3.233 33.2 0.048 75.8 0.686 -157.0
500 0.752 -175.4 2.826 26.8 0.059 77.9 0.715 -162.3
550 0.771 179.9 2.475 20.7 0.070 76.9 0.743 -167.6
600 0.789 175.4 2.186 15.2 0.083 76.1 0.763 -172.3
650 0.804 171.2 1.943 9.7 0.095 73.7 0.789 -177.3
700 0.819 166.9 1.738 4.6 0.108 71.0 0.804 178.1
750 0.834 162.6 1.560 0.0 0.120 68.1 0.820 173.5
800 0.842 158.5 1.410 -4.5 0.133 65.0 0.837 169.0
850 0.851 154.3 1.275 -8.7 0.145 61.6 0.847 164.8
900 0.859 150.3 1.160 -12.6 0.157 58.2 0.858 160.2
950 0.866 146.2 1.058 -16.9 0.167 54.5 0.869 155.7
1000 0.870 142.3 0.963 -20.0 0.179 51.0 0.876 151.8
S11 S21 S12 S22
Silicon RF Power Semiconductors
RD06HVF1
RoHS Compliance, Silicon MOSFET Power Transistor 175MHz,6W
RD06HVF1 6 Jul 2010
8/9
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
ATTENTION:
1.High Temperature ; This product might have a heat generation while operation,Please take notice tha
t
have a possibility to receive a burn to touch the operating product directly or touch the product until cold
after switch off. At the near the product,do not place the combustible material that have possibilities to aris
e
the fire.
2.Generation of High Frequency Power ; This product generate a high frequency power. Please take notic
e
that do not leakage the unnecessary electric wave and use this products without cause damage for human
and property per normal operation.
3.Before use; Before use the product,Please design the equipment in consideration of the risk for human
and electric wave obstacle for equipment.
PRECAUTIONS FOR THE USE OF MITSUBISHI SILICON RF POWER DEVICES:
1. The specifications of mention are not guarantee values in this data sheet. Please confirm additional details
regarding operation of these products from the formal specification sheet. For copies of the formal
specification sheets, please contact one of our sales offices.
2. RD series products (RF power transistors) are designed for consumer mobile communication terminals
and were not specifically designed for use in other applications. In particular, while these products ar
e
highly reliable for their designed purpose, they are not manufactured under a quality assurance testing
protocol that is sufficient to guarantee the level of reliability typically deemed necessary for critical
communications elements. Examples of critical communications elements would include transmitters fo
r
base station applications and fixed station applications that operate with long term continuous transmission
and a higher on-off frequency during transmitting, especially for systems that may have a high impact t
o
society.
3. RD series products use MOSFET semiconductor technology. They are sensitive to ESD voltage therefor
e
appropriate ESD precautions are required.
4. In the case of use in below than recommended frequency, there is possibility to occur that the device is
deteriorated or destroyed due to the RF-swing exceed the breakdown voltage.
5. In order to maximize reliability of the equipment, it is better to keep the devices temperature low. It is
recommended to utilize a sufficient sized heat-sink in conjunction with other cooling methods as needed
(fan, etc.) to keep the channel temperature for RD series products lower than 120deg/C(in case o
f
Tchmax=150deg/C) ,140deg/C(in case of Tchmax=175deg/C) under standard conditions.
6. Do not use the device at the exceeded the maximum rating condition. In case of plastic molded devices,
the exceeded maximum rating condition may cause blowout, smoldering or catch fire of the molding resin
due to extreme short current flow between the drain and the source of the device. These results causes in
fire or injury.
7. For specific precautions regarding assembly of these products into the equipment, please refer to th
supplementary items in the specification sheet.
8. Warranty for the product is void if the products protective cap (lid) is removed or if the product is modified
in any way from it’s original form.
9. For additional “Safety first” in your circuit design and notes regarding the materials, please refer the las
t
page of this data sheet.
10. Please refer to the additional precautions in the formal specification sheet.
Silicon RF Power Semiconductors
RD06HVF1
RoHS Compliance, Silicon MOSFET Power Transistor 175MHz,6W
RD06HVF1 6 Jul 2010
9/9
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Mitsubishi Electric Corporation puts the maximum effort into making semiconductor products better and more reliable, but
there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire
or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate
measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of non-flammable material or (iii) prevention against
any malfunction or mishap.
Keep safety first in your circuit designs !
- These materials are intended as a reference to assist our customers in the selection of the Mitsubishi semiconductor product
best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other
rights, belonging to Mitsubishi Electric Corporation or a third party.
- Mitsubishi Electric Corporation assumes no responsibility for any damage, or infringement of any third-party’s rights, originating
in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these
materials.
- All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents
information on products at the time of publication of these materials, and are subject to change by Mitsubishi Electric
Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact
Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for the latest product information
before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical
errors. Mitsubishi Electric Corporation assumes no responsibility for any damage, liability, or other loss rising from these
inaccuracies or errors. Please also pay attention to information published by Mitsubishi Electric Corporation by various means,
including the Mitsubishi Semiconductor home page (http://www.mitsubishichips.com).
- When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the
information and products. Mitsubishi Electric Corporation assumes no responsibility for any damage, liability or other loss
resulting from the information contained herein.
- Mitsubishi Electric Corporation semiconductors are not designed or manufactured for use in a device or system that is used
under circumstances in which human life is potentially at stake. Please contact Mitsubishi Electric Corporation or an authorized
Mitsubishi Semiconductor product distributor when considering the use of a product contained herein for any specific
purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
- The prior written approval of Mitsubishi Electric Corporation is necessary to reprint or reproduce in whole or in part these
materials.
- If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license
from the Japanese government and cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is
prohibited.
- Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for further details
on these materials or the products contained therein.
Notes regarding these materials