Issue A 10/05
Page 1 of 4
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
1-Watt SMD Blue LED Lamp
(7 mm)
OVSPBCCR8
x High luminous flux output for illumination
x Exposed pad design for excellent heat transfer
x Designed for high current operation
x Reflow soldering applicable
The OVSPBCCR8 is designed to handle high current and heat and emits sufficient light for a variety of lighting
and illumination applications. Small size and high power allow for compact and cost-effective lighting solutions.
Applications
x Automotive (exterior and interior lighting)
x Backlighting LCD displays (televisions and computer monitors)
x Entertainment (studios, theaters, nightclubs, restaurants)
x Accent lighting (wall wash, landscape, spotlight)
x Bicycle and pedestrian safety lights
Product Photo Here
Part Number Material Emitted Color Flux Typ. lm
OVSPBCCR8 InGaN Blue 11
Lens Color
Water Clear
1 ANODE 2 HEAT SINK 3 CATHODE DIMENSIONS ARE IN INCHES AND [MILLIMETERS].
DO NOT LOOK DIRECTLY
AT LED WITH UNSHIELDED
EYES OR DAMAGE TO
RETINA MAY OCCUR.
RoHS Moisture
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 10/05
Page 2 of 4
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. Pb content <1000 PPM.
3. To designate luminous intensity ranks, please contact OPTEK.
1-Watt SMD Blue LED Lamp (7 mm)
OVSPBCCR8
Absolute Maximum Ratings
TA = 25o C (on metal core PCB1) unless otherwise noted
Storage Temperature Range -40 ~ +85° C
Operating Temperature Range -40 ~ +85° C
Reverse Voltage 5 V
Continuous Forward Current 300 mA
Peak Forward Current (10% Duty Cycle, 1KHz) 500 mA
Power Dissipation 1.3 W
Junction Temperature +125° C
Junction-to-case2 15° C/W
Junction-to-Ambient +45° C/W
Notes:
1. Metal core PCB defined as good heat transmission substrate (thickness of 2.0mm Al-based PCB 20x20mm, JC <15°C/W could do)
2. Rth test condition: mounted on 2.0mm Al-based PCB 20x20mm.
3. Rth test condition: mounted on 2.0 mm Al-based PCB in size of 20 x 20 mm.
Electrical Characteristics
TA = 25o C (on metal core PCB1) unless otherwise noted
SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS
lumen Luminous Flux 5 11 ---- lm IF = 300 mA
VF Forward Voltage ---- 3.6 4.4 V IF = 300 mA
IR Reverse Current ---- ---- 10 µA VR = 5 V
D Dominant Wavelength 464 470 476 nm IF = 300 mA
2 ½ 50% Power Angle ---- 140 ---- deg IF = 300 mA
Standard Bins (IF = 300 mA)
Lamps are sorted to luminous flux ( V) and dominant wavelength ( D) and ranked as shown.
Orders for OVSPBCCR8 may be filled with any or all bins contained as below.
Rank V5 V6 V7
Voltage (V) 3.2 ~ 3.6 V 3.6 ~ 4.0 V 4.0 ~ 4.4 V
11
9 E
7 D
5 C
468
464 472 476
Luminous Flux (lm)
Luminous Flux is at
C bin or above.
Forward Voltage (VF)
Dominant Wavelength (nm)
Issue A 10/05
Page 3 of 4
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
1-Watt SMD Blue LED Lamp (7 mm)
OVSPBCCR8
Typical Electro-Optical Characteristics Curves
Maximum Forward DC Current vs Ambient
Temperature
°C
j-c 15°C/
c-a 45°C/
200
300
400
500
100
0
mA
0 20 40 60 100 110
80
4.6
3.0 3.4 3.6 4.2
400
300
200
100
0
mA
500
Forward Current vs Forward Voltage
V
100
75
50
25
0
%
Relative Luminous Intensity vs Wavelength
nm
300 400 500 600
Half Power WL = 470nm
300 500
400 200 100
0
mA
40
80
120
160
0
%
Relative Luminous Flux vs Forward Current
40
60
80
100
20
0
%
0 -90 -60 -30 30 60 90
Far Field Pattern
°C
50% Power Angle: 140°
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 10/05
Page 4 of 4
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
1-Watt SMD Blue LED Lamp (7 mm)
OVSPBCCR8
Moisture Resistant Packaging
Carrier Tape Dimensions: Loaded quantity 1400 pieces per reel
Reel Dimensions: 13 inch reel
Label Aluminum Moisture-proof Bag Desiccant Bar Code Label
REEL
(506-DORREE-00)
(Ø 330 x 16 MM)
