ACCESSORIES INTRODUCTION Amphenol is a leading designer, manufacture and marketer of interconnection solutions since 1972. Amphenol is the first Company in India who started manufacturing high performance connectors. These expertise and capabilities enables us to turn your interconnection problems to solutions Amphenol Back Shells and Accessories are developed for environmental protection needs of circular connectors. These are designed to meet the requirements of military standards. The Military numbers indicated in this catalogue are for reference only. This catalogue describes the standard and special purpose designs used in Military and industrial circular connectors meeting the following specifications. MIL-C-5015 MIL-C-26482 MIL-C-38999 MIL-C-55116 Index Contents Series 62 IN Series MS/97/97B Series MS347 & MS Crimp Series 38999 Series 164 Page 2 10 17 24 31 AMPHENOL 1 ACCESSORIES SERIES 62IN These are the accessories compatible with miniature circular bayonet-coupled connectors according to MIL-C-26482 Series 1. The standard finishes of these accessories are Cadmium with olive drab chromate. Other alternate finishes are also available on request. 62IN-584 Grommet seal & nut 62IN-585 Grommet seal & nut with Strain Relief Clamp 62IN-720 Clamp for Unscreened jacketed cable 62IN-776 General duty shell 62IN-736 Cap with chain for single hole mounting Receptacle 62IN-737 Cap with chain for cable Receptacle 62IN-738 Cap with chain for flange mounting Receptacle 62IN-742 Cap with chain for plug 62IN-810 Cap with Chord for plug 62IN-812 Cap with Chord fo flange Receptacle 62IN-813 Cap with Chord for single hole mount Receptacle 62IN-814 Cap with Chord for cable Receptacle 62IN-760 Flange mounting gasket 62IN-pg PG Adapter AMPHENOL 2 ACCESSORIES 62IN - 584 - XX - XXS or P Grommet seal and nut provides an environmental for the exposed solder buckets in the open back class T shells. 584 A o/all max G max Suffix XX - XXS or P enables grommet to be matched to the insert arrangement. Shell Size A G max 08 13.84 14.25 10 13.84 17.43 12 13.84 20.60 14 13.84 23.78 16 13.84 26.95 18 13.84 30.13 20 13.84 33.30 22 13.84 36.75 24 12.73 39.65 62IN - 585 XX- XXS or P Grommet and nut with strain relief clamp. The clamp prevents the flexing of the wires in The immediate vicinity of the risers, so avoiding the risk of leaks. 585 A o/all max G max H Suffix XX - xxS or P enables Grommet to be matched to the jnsert arrangement. Shell Size A max G max H max 08 25.17 21.03 4.09 10 25.17 22.63 4.90 12 25.17 25.81 8.05 14 24.51 28.98 9.65 16 28.07 36.22 16.00 18 28.07 36.22 16.00 20 32.64 36.22 16.00 22 32.64 39.80 19.18 24 34.88 44.07 20.45 AMPHENOL 3 ACCESSORIES 62IN - 720 - XX A o/all max Clamp for unscreened jacketed cable No grommet is supplied, for use with 50T, 51T and 56T styles. G max Z Suffix XX specifies shell size Z Shell Size A max G max closed free 08 27.56 14.25 4.28 5.84 10 26.92 17.43 5.21 7.93 12 29.46 20.60 8.59 11.23 14 34.54 23.78 10.57 13.69 16 40.26 26.95 13.97 15.65 18 45.34 30.13 15.24 17.57 20 50.32 33.30 16.13 18.98 22 55.39 36.75 17.02 21.49 24 56.28 39.65 18.80 22.71 62IN -776 A o/all max General duty shell to accept conduit, AN 3057 or MS 3057 A cable clamps and heat shrink sleeves. AMPHENOL 4 M Shell Size A Max M Thred 08 23.80 1/2 - 28 UNEF 10 23.80 5/8 - 24 NEF 12 23.8 3/4 - 20 UNEF 14 23.80 7/8 - 20 UNEF 16 23.8 1 -20 UNEF 18 23.80 1.3/16 -18 NEF 20 23.8 1.3/16 - 18 NEF 22 23.80 1.7/16 - 18 NEF 24 23.8 1.7/16 - 18 NEF ACCESSORIES 62IN - 736 Cap and chains for single hole mounting receptacles J Dia 736 B A C Shell Size A -6.35 B -0.13 C DIA MAX J + 0.127 08 76.2 13.23 18.64 14.68 10 76.2 13.23 21.82 17.86 12 88.9 13,23 25.4 22.63 14 88.9 13.23 28.57 25.81 16 88.9 13.23 31.75 29.39 18 88.9 13.23 34.92 32.16 20 101.6 13.23 38.1 35.33 22 101.6 13.23 41.27 38.51 24 101.6 14.12 44.45 41.68 62IN - 737 Caps and chains for cable mounting receptacles J Dia B A C Shell Size A -6.35 B -0.13 C DIA MAX J - 0.127 08 76.2 15.21 18.64 11.63 10 76.2 15.21 21.82 14.81 12 88.9 15.21 25.4 17.98 14 88.9 15.21 28.57 22.76 16 88,9 15.21 31.75 25.93 18 88.9 15.21 34.92 29.11 20 101,6 15.21 38.1 32.28 22 101.6 15.21 41.27 35.46 24 101.6 15.21 44.45 38.63 AMPHENOL 1 ACCESSORIES 62IN - 736 Caps and chains for flange mounting receptacles. 738 B J Dia C A J -0.127 13.23 C dia max 18.64 76.2 13.23 21.82 3.18 12 88.9 13.23 25.4 3.18 14 88.9 13.23 28.57 3.18 16 88.9 13.23 31.75 3.18 18 88.9 13.23 34.92 3.18 20 101.6 13.23 38.1 3.18 22 101.6 13.23 41.27 3.18 24 101.6 14.12 44.45 3.86 Shell Size A - 6.35 B - 0.13 08 76.2 10 62IN - 742 Caps and chains for plugs. 742 3.18 B J Dia C A AMPHENOL J -0.127 13.25 C dia max 18.26 76.2 13.25 21.43 3.18 12 88.9 13.25 25.4 3.18 14 88.9 13.25 28.57 3.18 16 88.9 13.25 31.75 3.18 18 88.9 13.25 34.92 3.18 20 101.6 14.83 38.1 3.18 22 101.6 14.83 41.27 3.18 24 101.6 15.67 44.45 3.86 Shell Size A - 6.35 B - 0.13 08 76.2 10 6 3.18 ACCESSORIES 62IN - 810 Caps and cords for plugs 810 B J Dia C A 13.25 C dia max 18.26 3.68 76.2 13.25 21.43 3.68 12 88.9 13.25 25.4 3.68 14 88.9 13.25 28.57 3.68 16 88.9 13.25 31.75 3.68 20 101.6 14.83 38.1 3.68 22 101.6 14.83 41.27 3.68 24 101.6 15.67 44.45 4.34 Shell Size A - 6.35 B - 0.13 08 76.2 10 62IN - 812 Caps and cords for flange mounting receptacles. J -0.8 812 B J Dia C A J -0.08 13.23 C dia max 18.64 76.2 13.23 21.82 3.68 12 88.9 13.23 25.4 3.68 14 88.9 13.23 28.57 3.68 16 88.9 13.23 31.75 3.68 18 88.9 13.23 34.92 3.68 20 101.6 13.23 38.1 3.68 22 101.6 13.23 41.27 3.68 24 101.6 14.12 44.45 4.34 Shell Size A - 6.35 B - 0.13 08 76.2 10 3.68 AMPHENOL 7 ACCESSORIES 62IN - 813 Caps and cords for single hole mounting receptacles. 813 B J Dia C A 13.23 C dia max 18.64 14.68 76.2 13.23 21.82 17.86 12 88.9 13.23 25.4 22.63 14 88.9 13.23 28.57 25.81 16 88.9 13.23 31.75 29.39 18 88.9 13.23 34.92 32.15 20 101.6 13.23 38.1 35.33 22 101.6 13.23 41.27 38.51 24 101.6 14.12 44.45 41.68 Shell Size A - 6.35 B - 0.13 08 76.2 10 J -0.25 62IN - 814 814 Caps and cords for cable mounting receptacles. B J Dia C A AMPHENOL 13.23 C dia max 18.26 11.50 76.2 13.23 21.43 14.64 12 88.9 13.23 25.4 17.85 14 88.9 13.23 28.57 22.63 16 88.9 13.23 31.75 25.80 18 88.9 13.23 34.92 28.98 20 101.6 13.23 38.1 32.15 22 101.6 13.23 41.27 35.33 24 101.6 14.12 44.45 38.50 Shell Size A - 6.35 B - 0.13 08 76.2 10 8 J -0.25 ACCESSORIES 62IN - 760 760 Flange mounting gasket for box mounting and hermetic receptacles. D sq H F dia Gsq E E +- 0.254 15.08 F +- 0.20 12.90 G +0.254 H 08 D +- 0.254 20.62 3.30 1.06/0.40 10 23.82 18.26 16.07 3.30 1.06/0.40 12 26.18 20.65 19.25 3.30 1.06/0.40 14 28.57 23.01 22.42 3.30 1.06/0.40 16 30.96 24.61 25.60 3.30 1.06/0.40 18 33.32 27.00 28.77 3.30 1.06/0.40 20 36.52 29.36 31.95 3.30 1.06/0.40 22 39.70 31.75 35.13 3.30 1.06/0.40 24 42.87 34.92 38.30 3.96 1.06/0.40 Shell Size PG Adapter X PG A B L Part No. For Shell Size X Thread in inches A B L PG Thread 62IN08-PG7 8 13.23 16.50 14.50 20.00 PG7 62IN10-PG9 10 13.23 22.00 17.70 20.00 PG9 62IN12-PG9 12 13.23 22.00 21.00 20.00 PG9 62IN14-PG13.5 14 13.23 28.00 23.50 25.00 PG13.5 62IN16-PG9 16 13.23 29.00 27.80 30.00 PG9 62IN20-PG21 20 13.23 35.00 34.00 40.00 PG21 AMPHENOL 9 ACCESSORIES SERIES MS/97/97B These are the accessories compatible with Threaded-coupled connectors according to MIL-C-5015. The standard finishes of these accessories are Black anodic. Other alternate finishes are also available on request. AMPHENOL 10 MS-3057 Cable Clamp MS-3420 Telescopic Bush - Neoprene MS-25042 Cap for Plug MS-25043 Cap for Receptacle 97B-25042 Cap for Plug 97B-25043 Cap for Receptacle MS-PG Pg Adapter MS-52000 Flange Gasket MS-3105 Dummy Receptacle MS Strain Relief Backshell MS Right Angle Backshell ACCESSORIES Cable clamp MS-3057 Use MS-3420 sleeves B C A All Dimensions are in mm Part number Shell Size Max OD of cable A B C Thread in inches MS-3057-4A 10SL,12S 7.94 20.90 21.39 7.94 5/8-24 MS-3057-6A 14,14S 11.11 21.27 25.27 11.11 3/4-20 MS-3057-8A 16,16S 14.29 23.37 28.45 14.29 7/8-20 MS-3057-10A 18 15.87 23.37 30.89 15.87 1-20 MS-3057-12A 20.22 19.05 23.54 35.64 19.05 1 3/16-18 MS-3057-16A 24.28 23.81 25.78 42.75 23.81 1 7/16-18 MS-3057-20A 32 31.70 28.00 51.00 31.70 1 3/4-18 MS-3057-24A 36 34.92 29.36 57.02 34.92 2-18 Neoprene sleeve MS-3420 D Rubber bushing Protects wire bundles and unjacketed cable from possible damage by cable clamp. F E - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A 45 B 0 All Dimensions are in mm Part number A B c D E Rad in inches F Rad in inches MS-3420-3 3.30 5.33 9.50 73.02 1/32 1/32 MS-3420-4 5.59 7.67 12.70 69.85 1/32 1/32 MS-3420-6 7.92 10.84 15.59 66.67 1/32 1/16 MS-3420-8 11.10 14.02 18.77 63.50 1/16 1/16 MS-3420-10 14.27 15.62 21.94 60.32 1/16 1/16 MS-3420-12 15.87 18.80 26.90 57.15 1/16 1/16 MS-3420-16 19.05 23.54 26.36 53.97 1/16 1/16 MS-3420-20 23.80 31.50 40.41 50.80 1/16 1/16 MS-3420-24 31.75 34.67 46.79 47.62 1/16 1/16 AMPHENOL 11 ACCESSORIES Protective cap for MS and 97 series MS-25042 For Plugs B MAX /D C MAX A Has external threads and used on all plugs where a coupling ring is provided E All Dimensions are in mm MS Part number For connector size A Thread in inches B C D E MS 25042-10-1 MS 10S-1-SL 5/8-24 16.67 17.4 4 102 MS 25042-12-1 MS 12-12S 3/4-20 21.4 20.6 4 115 MS 25042-14-1 MS 14-14S 7/8-20 21.4 23.7 4 115 MS 25042-16-1 MS 16-16S 1-20 21.4 26.9 4 115 MS 25042-18-1 MS 18 1 1/8-18 21.4 30 4 115 MS 25042-20-1 MS 20 1 1/4-18 21.4 33 4.8 127 MS 25042-22-1 MS 22 1 3/8-18 21.4 36.4 4.8 127 MS 25042-24-1 MS 24 1 1/2-18 21.4 39.6 4.8 140 MS 25042-28-1 MS 28 1 3/4-18 21.4 46 4.8 197 MS 25042-32-1 MS 32 2 1/4-18 21.4 52 5.6 197 MS 25042-36-1 MS 36 2 1/4-186 21.4 58.7 5.6 197 MS 25042-40-1 MS 40 2 1/2-16 21.4 65 5.6 -SLS-197 Protective cap for MS & 97 series MS-25043 For receptacles A C MAX Has internal threads & is used on all receptacles. Gasket is provided in the dust cap forming a watertight seal. O /D B MAX E All Dimensions are in mm MS Part number For connector size A Thread in inches B C D E MS 25043-10-1 MS 10S-1-SL 5/8-24 11-11 20.7 3.6 102 MS 25043-12-1 MS 12-12S 3/4-20 11-11 25.4 3.6 115 MS 25043-14-1 MS 14-14S 7/8-20 11-11 28.6 3.6 115 MS 25043-16-1 MS 16-16S 1-20 11-11 30.2 3.6 115 MS 25043-18-1 MS 18 1 1/8-18 11-11 34.1 3.6 115 MS 25043-20-1 MS 20 1 1/4-18 11-11 37.3 4.4 127 MS 25043-22-1 MS 22 1 3/8-18 11-11 40.4 4.4 127 MS 25043-24-1 MS 24 1 1/2-18 11-11 43.6 4.4 140 MS 25043-28-1 MS 28 1 3/4-18 12-7 50 4.4 197 MS 25043-32-1 MS 32 2 -18 12-7 56.3 4.8 197 MS 25043-36-1 MS 36 2 1/4-18 12-7 62.7 4.8 197 MS 25043-40-1 MS 40 2 1/2-16 12-7 69 4.8 197 Notes : AMPHENOL 1. For protective caps without chain or with nylon cord, contact factory 2. Standard - black anodised finish. For alternatives, contact factory. 3. Standard - straight For diamond knurling on caps, contact factory. 12 ACCESSORIES Protective cap for 97B series 97B-25042 A D B For Plugs Has external grooves and is used on all plugs E All Dimensions are in mm Part number For connector size A Max B D E 97B 25042-10SL 10SL 23.00 24.00 4.20 102 97B 25042-14S 14S 30.00 24.00 4.20 115 97B 25042-16S 16S 32.50 24.00 4.20 115 97B 25042-16 16 32.50 33.00 4.70 115 97B 25042-18 18 36.40 39.00 4.70 115 97B 25042-20 20 40.50 33.00 4.70 127 97B 25042-22 22 43.50 33.00 4.70 127 97B 25042-24 24 46.50 44.00 4.70 140 97B 25042-28 28 54.00 33.00 5.60 197 97B 25042-32 32 60.00 46.00 5.60 197 97B 25042-36 36 66.20 46.00 5.60 197 97B 25042-40 40 73.00 33.00 5.60 197 Protective cap for 97B series 97B-25043 For receptalces A D B Has internal bayonet pins and is used on all receptacles. E All Dimensions are in mm Part number For connector size 97B 25043-10SL 10SL 97B 25043-14S 14S 97B 25043-16S 16S 97B 2503-16 16 B D E 23.00 15.50 4.20 102 30.00 15.50 4.20 115 32.50 15.50 4.20 115 32.50 21.20 4.20 115 A Max 97B 25032-18 18 37.00 21.20 4.20 115 97B 25043-20 20 40.50 21.20 4.70 127 97B 25043-22 22 43.50 21.20 4.70 127 97B 25043-24 24 47.50 21.20 4.70 140 97B 25043-28 28 54.00 21.20 5.60 197 97B 25043-32 32 60.50 21.20 5.60 197 97B 25043-36 36 67.00 21.20 5.60 197 97B 25043-40 40 73.00 21.20 5.60 197 Notes : 1. For protective caps without chain or with nylon cord, contact factory 2. Standard - black anodised finish. For alternatives, contact factory. 3. Standard - straight For diamond knurling on caps, contact factory. AMPHENOL 13 ACCESSORIES PG Adapter G PG B A L All Dimensions are in mm Shell Size G Thread in inches 10SL 5/8-24 12S 11/16-24 14 3/4-20 16 7/8-20 18 1-20 20 1 1/8-18 PG 9 A 30 B PG 11 L 21 26 A PG13 PG16 B L A B L 23 23 30 23 23 30 25 25 30 30 26 35 26 PG21 A B L 25 25 30 37 30 28 37 40 35 28 35 28 PG29 A B L 40 35 35 40 40 PG36 A B L 22 1 1/4-18 35 35 40 24 1 3/8-18 38 35 40 40 40 40 28 1 5/8-18 45 37 45 45 45 45 57 44 55 36 2 1/8-18 Notes : For ordering information on flat gaskets and PG adaptors,contact factory. C A C A D ia B . Flange Gasket MS-52000 Dia. D 4 HOLES All Dimensions are in mm Part number For connector Size B D E MS-101000 10SL 18.26 15.90 25.40 4.35 MS-108686 12S & 12 20.62 19.05 27.80 4.35 MS-101001 14S & 14 23.01 22.20 30.15 4.35 MS-101002 16S & 16 24.61 25.40 32.50 4.35 MS-101003 18 27.00 28.57 34.90 5.15 MS-101004 20 29.36 31.75 38.10 5.15 MS-101005 22 31.75 34.90 41.20 5.15 MS-108687 24 34.90 38.10 44.45 5.15 MS-101006 28 39.70 44.45 50.80 5.15 MS-108688 32 44.45 50.80 57.15 5.55 MS-101007 36 49.22 55.57 63.50 5.55 Notes : The dash number also indicates shell size. AMPHENOL A Max 14 A B L 57 57 55 ACCESSORIES Dummy receptacle MS-3105 A B O /C E D OG / F MAX E All Dimensions are in mm Part number (see note) A B C D Thread in inches E F G MS-3105-10S 25-4 18.26 3.05 5/8-24 14-27 3.96 8.20 MS-3105-12S 27.79 20.62 3.05 3/4-20 14-27 3.96 11.43 MS-3105-12 27.789 20.62 3.05 3/4-20 19-05 3.96 11.43 MS-3105-14S 30.17 23.01 3.05 7/8-20 14-27 3.96 13.36 MS-3105-14 30.17 23.01 3.05 7/8-20 19.05 3.96 13.36 MS-3105-16S 32.54 24.61 3.05 1-20 14.27 3.96 16.41 MS-3105-16 32.54 24.61 3.05 1-20 19.05 3.96 16.41 MS-3105-18 34.92 26.97 3.05 1 1/8-18 19.05 5.16 18.03 MS-3105-20 38.10 29.36 3.05 1 1/4-18 19.05 5.16 23.54 MS-3105-22 41.27 31.75 3.05 1 3/8-18 19.05 5.16 25.93 MS-3105-24 44.45 34.92 3.73 1 1/2-18 20.62 5.16 29.21 MS-3105-28 50.8 39.67 3.73 1 3/4-18 20.62 5.16 34.67 MS-3105-36 63.5 49.22 4.39 2 1/4-16 22.22 9.11 46.56 Notes : The dash number also indicates shell size. Strain Relief Backshell Class E and F L N A All Dimensions are in mm L max for 97B N max 54.07 59.10 21.97 11/16-24NEF 54.07 --- 21.97 3/4-20 UNEF 55.90 61.34 25.15 16S 7/8-20 UNEF 55.90 62.86 28.45 MS-108158 16 7/8-20UNEF 64.41 MS-108159 18 1-20 UNEF 65.94 71.10 30.76 MS-108160 20 1 1/8-24 NS 67.41 72.55 37.29 MS-108161 22 1 1/4-18 NEF 67.41 72.55 37.29 MS-108162 24 1 3/8-18NEF 73.28 76.82 44.45 MS-108163 28 1 5/8-18 NEF 73.28 77.82 44.45 MS-108164 32 1 29/32-18 NS 74.75 MS-108165 36 2 1/16-20 UNS 74.75 A Thread Class 2B in L max for MS/97 inches Part number A MS-108155 10SL 5/8-24 NEF MS-108156 12S MS-108157 14S MS-108158 28.45 52.22 77.64 57.15 Standard finish is cadmium Olive drab AMPHENOL 15 ACCESSORIES Right Angle Backshell L Q L1 A V All Dimensions are in mm Part number Connector Size A Thread Class 2B in inches L max for MS/97 L max for 97B L1 max L1 max V Thread in inches MS-108917 10SL 5/8-24 NEF 37.60 45.00 25.00 22.22 5/8-24 UNEF MS-108918 12S 11/16-24 NEF 37.80 --- 25.00 25.40 5/8-24 UNEF MS-108918 12 11/16-24 NEF 47.30 --- 25.00 25.40 5/8-24 UNEF MS-108919 14S 3/4-20NEF 39.40 47.00 27.00 28.57 3/4-20UNEF MS-108919 14 3/4-20 UNEF 48.90 --- 27.00 28.57 3/4-20 UNEF MS-108920 16S 7/8-20 UNEF 42.60 48.00 28.00 31.75 7/8-20 UNEF MS-108920 16 7/8-20UNEF 52.10 57.00 28.00 31.75 7/8-20UNEF MS-108921 18 1-20 UNEF 53.70 58.00 31.00 34.13 1-20 UNEF MS-108922 20 1 1/8-24 NS 58.80 61.00 34.00 37.30 1 3/16-18 NS MS-108923 22 1 1/4-18 NEF 58.80 61.00 34.00 40.48 1 3/16-18 UNEF MS-108924 24 1 3/8-18NEF 63.60 66.00 37.00 43.66 1 7/16-18 UNEF MS-108925 28 1 5/8-18 NEF 63.60 66.00 39.00 50.00 1 7/16-18 UNEF MS-108926 32 1 29/32-18 NS 69.60 72.00 45.00 56.50 1 3/4-18 UNS MS-108927 36 2 1/16-20 UNS 72.80 75.00 48.00 62.71 2-18 UNS Standard finish is cadmium Olive drab Note : Both versions, straight and diamond knurling available on back accessories. For details, contact factory. AMPHENOL 16 ACCESSORIES SERIES MS347 & MS CRIMP These are the accessories compatible with connectors according to MIL-C-26482 Series 2 & MIL-C-5015 Crimp type. The standard finishes of these accessories are Cadmium with olive drab chromate. Other alternate finishes are also available on request. M85049/26-1 Straight Shield Termination M85049/26-2 Shielding Ring M85049/31 Straight Back Shell M85049/34 Straight Adapter M85049/52-1 Straight SR Clamp M85049/60-1 Shrink Boot Adapter AMPHENOL 17 ACCESSORIES Straight Shield Termination M85049/26-1 M85049/26-1 20 N FINISH N - ELECTROLESS NICKEL W - CADMIUM, OLIVE DRAB A - BLACK ANODIZE MIL SPEC SIZE CODE See Dimension Table Below E Dia C Dia A Dia D B THREAD F Size Code MIL-C-26482 Series 2 MIL-C-5015 Crimp A dia B Thread Class 28 C dia D dia E F 8 8 85 15.68 1/2-20UNE 8.56 6.35 32.44 13.72 10 10 10S,10SL 18.65 5/8-24UNEF 12.40 8.26 32.44 13.72 12 12 12S & 12 21.80 3/4-20UNEF 12.70 10.67 32.44 13.72 14 14 14S & 14 25.00 7/8-20UNEF 15.75 13.72 32.44 13.72 16 16 16S & 16 28.25 1-20UNEF 19.05 17.02 32.44 13.72 18 18 18 30.94 1-1/16-18UNEF 22.36 20.05 32.44 13.72 20 20 20 34.17 1-3/16-18UNEF 25.44 23.22 32.44 13.72 22 22 22 37.29 1-5/16-18UNEF 28.45 26.40 32.44 13.72 24 24 24 40.47 1-7/16-18UNEF 30.28 28.25 32.44 13.72 28 28 50.10 1-3/4-18UNS 39.25 35.29 36.66 17.84 32 32 56.37 2-18UNS 45.60 41.53 36.66 17.84 36 36 62.72 2.1/46UN 51.95 47.00 36.66 17.84 AMPHENOL 18 ACCESSORIES Shielding Ring M85049/26-2 M85049/26-2 -10 SHELL SIZE MIL SPEC See Dimension Table Below L A B THIS MAY BE USED WITH M85049/26-1, M85049/33 Size Code Colour Code 8 A dia B dia min Max Min Max GREEN 10.16 10.42 12.40 11.64 RED 14.86 15.12 16.77 17.28 14 BLUE 17.91 18.17 19.82 20.32 16 GRAY 21.21 21.47 23.12 23.63 18 BROWN 25.53 25.79 27.44 27.94 20 GREEN 28.58 28.83 30.48 30.99 PINK 31.63 31.88 33.53 34.04 28 RED 42.30 42.55 44.20 44.71 32 GRAY 48.65 48.90 50.55 51.05 36 GREEN 55.00 55.25 56.90 57.41 10 12 22 24 L -0.20 6.35 11.18 STANDARD MATERIAL IS COPPER AND FINISH TIN PLATING CONSULT FACTORY FOR ANY VARIATIONS AMPHENOL 19 ACCESSORIES Straight Back Shell M85049/31 M85049/31 10 W FINISH MIL SPEC W - Cadium, Olive Drab N - Electroless Nickel A - Black Anodize SIZE CODE See Dimension Table Below A Dia C THREAD B Connector Shell Size A B C Thread Class 2B 8S 15.67 13.72 1/2-20 UNF 10 10S,10SL 18.64 13.72 5/8-24 UNEF 12 12 12S & 12 21.79 13.72 3/4-20 UNEF 14 14 14S & 14 24.99 13.72 7/8-20 UNEF 16 16 16S & 16 28.24 13.72 1-20 UNEF 18 18 18 30.94 13.72 1-1/16-18 UNEF 20 20 20 34.16 13.72 1-3/16-18 UNEF 22 22 22 37.29 13.72 1-5/16-18 UNEF 24 24 24 40.46 13.72 1-7/16-18 UNEF 28 28 50.01 17.83 1-3/4-18 UNS 32 32 56.36 17.83 2-18 UNS 36 36 62.71 17.83 2-1/4-16 UN Size Code MIL-C-26482 Series 2 MIL-C-5015 Series 2 8 8 10 AMPHENOL 20 ACCESSORIES Straight Adapter For MS3114, MS3124 & MS 3474 Receptacles -10 M85049/34 SHELL SIZE MIL SPEC See Dimension Table Below V THREAD KNURL W THREAD N S Size Code F dia + 0.13 -0.02 N dia + 0.25 - 0.27 S max Thread UNEF Class2 A V W 8 8.18 12.7 20.63 5/8/-24 7/16-28 10 11.16 15.47 20.63 3/4-20 9/16-24 12 14.33 18.65 20.63 7/8-20 13/16-24 14 16.97 21.82 20.63 1-20 13/16-20 16 20.15 24.62 20.63 1-1/8-18 15/16-20 18 23.12 28.16 20.63 1-1/4-18 1-1/16-18 20 26.04 30.97 23.02 1-3/8-18 1-3/16-18 22 29.22 34.14 23.02 1-1/2-18 1-5/16-18 24 32.39 37.32 23.79 1-5/8-18 1-7/16-18 STANDARD FINISH IS CADMIUM OLIVE DRAB FOR OTHER FINISHES CONSULT FACTORY AMPHENOL 21 ACCESSORIES Straight Strain Relief M85049/52-1 N 20 M85049/60-1 FINISH MIL SPEC W - Cadium, Olive Drab N - Electroless Nickel A - Black Anodize Dia, A B THREAD SIZE CODE See Dimension Table Below A Dia C E CABLE ENTRY Size Code AMPHENOL For Connector Shell Size (REF) A max B Thread Class 2 B C MIL-C-5015 Crimp 8 MIL-C-26482 Series 8 8S 15.67 1/2-20 UNF 10 10 10S, 10SL 18.64 12 12 12S & 12 14 14 16 E Cable Entry Max Min 22.61 5.18 3.17 5/8-24 UNEF 25.40 7.26 4.74 21.79 3/4-20 UNEF 28.57 10.56 7.39 14S & 14 24.99 7/8-20 UNEF 28.57 12.09 8.91 16 16S & 16 28.24 1-20UNEF 31.75 15.90 12.72 18 18 18 30.93 1-1/16 -18UNEF 38.10 17.93 13.15 20 20 20 34.16 1-3/16 -18UNEF 41.27 21.10 14.75 22 22 22 37.29 1-5/16 -18UNEF 44.45 24.28 16.35 24 24 24 40.46 1-7/16 -18UNEF 47.62 27.47 17.93 28 28 50.01 1-3/4 -18UNS 55.54 30.10 19.05 32 32 56.36 2 -18UNS 60.32 31.75 22.22 36 36 62.71 2-1/4 -16UNS 69.85 34.92 23.82 22 ACCESSORIES Shrink Boot Adapter For MS3114,MS3124 & MS3474 Receptacles M85049/60-1 N 20 FINISH W - Cadium, Olive Drab N - Electroless Nickel A - Black Anodize MIL SPEC SIZE CODE See Dimension Table Below D THREAD A C B Connector Shell Size A Dia B C Dia D Thread Class2 B 8S 15.67 28.57 13.53 1/2-20UNF 10 10S, 10SL 18.64 28.57 15.36 5/8-24 UNEF -12 12 12S & 12 21.79 28.57 19.65 3/4-20 UNEF -14 14 14S & 14 24.99 28.57 21.28 7/8-20 UNEF -16 16 16S & 16 28.24 28.57 24.46 1-20 UNEF -18 18 18 30.93 28.57 26.46 1-1/16-18 UNEF -20 20 20 34.16 28.57 30.91 1-3/16-18 UNEF -22 22 22 34-28 28.57 34.41 1-5/16-18 UNEF -24 24 24 40.46 28.57 36.65 1-7/16-18 UNEF -28 28 50.01 32.68 43.40 1-3/4-18 UNEF -32 32 56.36 36.80 48.74 2-18 UNEF -36 36 62.7 36.80 55.09 21/4-16 UNEF Size Code MIL-C-26482 Series 2 M83723 SR I & IIl MIL-C-5015 Crimp -8 8 -10 STANDARD FINISH IS CADMIUM OLIVE DRAB FOR OTHER FINISHES CONSULT FACTORY AMPHENOL 23 ACCESSORIES SERIES - D38999 These are the accessories compatible with connectors according to MIL-C-38999 Series 3. The standard finishes of these accessories are Cadmium with olive drab chromate. Other alternate finishes are also available on request. AMPHENOL M85049/14 Back Shell M85049/33-2 Straight Shield Termination M85049/35 Straight Adapter M85049/38 Straight Strain Relief M85049/58 Plotting Boot Ring M85049/69 Shrink Boot Adapter 24 ACCESSORIES Back Shell M85049/14 M85049/14 1 17 W FINISH W - Cadium, Olive Drab N - Electroless Nickel A - Black Anodize MIL SPEC CONFIGURATION 1 - Rotating coupling nut. SIZE CODE See Dimension Table Below. A DIA MAX. B MAX. C THREAD A max B max C Thread Metric RH Class 6H 9 21.79 16.76 M12 x 1.0-0.10R 11 24.99 16.76 M15 x 1.0-0.10R 13 29.38 16.76 M18 x 1.0-0.10R 15 32.48 16.76 M22 x 1.0-0.10R 17 35.71 16.76 M25 x 1.0-0.10R 19 38.50 16.76 M28 x 1.0-0.10R 21 41.70 16.76 M31 x 1.0-0.10R 23 44.90 16.76 M34 x 1.0-0.10R 25 47.98 16.76 M37 x 1.0-0.10R Size Code M85049 Self Locking Only AMPHENOL 25 ACCESSORIES Straight Shield Termination M85049/33 M85049/33 - 2 - 10 W FINISH W - CADMIUM, OLIVE DRAB N - ELECTROLESS NICKEL A - BLACK ANODIZE CONFIGURATION 1) Straight adapter. 2) Straight shield termination 3) Straight Shield termination Supplied with M85049/26.2 shield ring SIZE CODE See Dimension Table Below. HOLES FOR SAFETY WIRE (3 EQUALLY SPACED) D E F B A C MIL-C-3899 Shell Size Series I Series II A dia max 8 9 8 19.05 13.72 28.88 8.82 6.74 8 10 11 10 21.59 13.72 28.88 12.65 8.72 10 12 13 12 25.40 13.72 28.88 12.83 11.10 12 14 15 14 27.94 13.72 28.88 16.00 14.28 14 16 17 16 31.75 13.72 28.88 19.31 17.45 16 18 19 18 35.56 13.72 28.88 22.61 20.63 18 20 21 20 38.10 13.72 28.88 25.66 23.80 20 22 23 22 41.91 13.72 28.88 28.71 26.57 12 24 25 24 43.18 13.72 28.88 30.54 28.58 24 Size Code AMPHENOL 26 B max C max D dia max F min USE M85049/26-2 Crimp Ring ACCESSORIES Straight Adapter M 85049/35 M85049/35 - 14 MIL SPEC SIZE CODE See dimension Table below F V THREAD C Thread G Size code MIL-C-38999 Shell Size Series 11 Series 1 C Thread Class 2B UNEF F max G min dia V Thread Class 2A UNEF 8 8 9 7/16-28 7.14 1/2-28 10 10 11 9/16-24 10.32 5/8-24 12 12 13 11/16-20 13.49 3/4-20 17.48 14 14 15 13/16-20 16.67 7/8-20 16 16 17 15/16-20 19.83 1-20 18 18 19 1 1/16-18 22,23 20 20 21 1 3/16-18 25.40 22 22 23 1 5/16-18 24 24 25 1 7/16-18 1 3/16-18 19.05 28.58 1 7/16-18 31.57 AMPHENOL 27 ACCESSORIES Straight Strain Relief M 85049/38 M 85049/38 - 17 A MIL SPEC FINISH W- CADMIUM,OLIVE DRAB A- BLACK ANODIZE N- ELECTROLESS NICKEL SIZE CODE See dimension Table Below HOLES FOR DIA. 0.51 MAX. SAFETY WIRE (3 EQ. SPACED) B THREAD A DIA. D E CABLE ENTRY C Shell Size A max B Metric R. H. Thread Class 6H C max E Cable Clamp D max max min 9 21.79 M12-1.0-0 100R 27.9 21.6 5.94 2.49 11 24.99 M15-1.0-0.100R 27.9 22.9 5.94 3.89 13 29.39 M18-1.0-0.100R 30.5 27.9 8.83 4.83 15 32.49 M22-1.0-0.100R 31.8 29.2 11.61 6.60 17 35.71 M25-1.0-0.100R 34.3 33.0 16.10 7.19 19 38.50 M28-1.0-0.100R 40.6 38.1 15.60 8.26 21 41.70 M31-1.0-0.100R 43.2 40.6 17.73 8.71 23 44.91 M34-1.0-0.100R 47.0 43.2 20.90 9.68 25 47.98 M37-1.0-0.100R 49.5 45.7 21.67 10.62 AMPHENOL 28 ACCESSORIES Potting Boot Ring M85049/58 -20 M85049/58 SIZE CODE MIL SPEC See dimension Table BELOW B THREAD D DIA. C DIA. A DIA. B Thread UNEF Class 2B C +.005 dia D +.005 dia Series I Series II A max dia 8 9 8 15.24 7/16-28 8.74 12.70 10 11 10 18.54 9/16024 11,99 15.88 12 13 12 21.59 11/16-24 14.89 19.05 14 15 14 24.80 13/16-20 18.06 22.23 16 17 16 28.00 15/16-20 21.24 25.40 18 19 18 31.15 1-1/16-18 23.93 28.58 20 21 20 34.35 1-3/16-18 27.11 31.75 22 23 22 37.50 1-5/16-18 30.28 34.93 24 25 24 40.70 1-7/16-18 33.46 38.10 Size Code MIL - C-38999 Shell Size STANDARD FINISH IS CADMIUM OLIVE DRAB FOR OTHER FINISHES CONSULT FACTORY AMPHENOL 29 ACCESSORIES Shrink Boot Adapter M85049/69 M85049/69 - 17 A D MIL SPEC DRAIN HOLE Omit if not required SIZE CODE See Dimension Table Below FINISH A - Black Anodize w - Cadmium Olive Drab N - Electroless Nickel Holes for Dia. 0.51 Max. Holes for safety wire (3 equally spaced) 18.03 MAX A Dia C Dia B Dia D 3.43 10.80 Max 16.26 Max AMPHENOL Size Code A Dia max B max C dia max D +.00 -0.20 9 19.1 6.35 13.54 1.12 11 21.6 9.52 15.37 1.12 13 25.4 12.70 19.66 1.12 15 29.20 15.88 21.29 1.12 17 31.8 19.05 24.46 1.12 19 35.6 20.62 26.47 1.12 21 39.40 23.80 30.91 1.75 23 41.9 26.97 34.42 1.75 25 47.00 30.18 36.65 1.75 30 ACCESSORIES SERIES 164 These are accessaries compatible with connectors to MIL-C-55116. The standard finishes of these accessories are Cadmium with olive drab chromate. Other alternate finishes are also available on request. 164-895 Cap for receptacles 164-896 Cap for plug 164-377 Cap for 10 pin Receptacle AMPHENOL 31 ACCESSORIES Accessories Cap and chain These cap and chain assemblies are used with 5 and 6 pin connectors as protective covers giving additional protection against moisture, dust and sand. The caps are manufactured from aluminum and black anodized The chain is manufactured from. stainless steel and is passivated 23.50 14.77 19.71 18.30 21.82 19.71 164-896 164-895 100 chain length All Dimensions are in mm Part Number For Connector 164-895 164-183 164-896 164-229 Cap and chain for ten pin waterproof audio receptacles (U-79 / U) Part No. 164-377 17.34 28.88 26.30 127 chain length Special accessories Please contact factory with specifications and drawings. Amphetronix has in-house capability to meet and custom build your special accessories requirements for circular connectors. Notice : All information, including illustrations given herein is believed to be accurate at the time printing. In Lieu of design advances. Amphenol reserves the right to change specifications without notice. This publication ACR 91/00-01 supersedes all existing Amphenol literature on backshells & accessories for circular connectors. AMPHENOL 32 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Amphenol: MS3057-28A MS3057-8A W/BUSHING MS3057-16B MS3057-20B MS3057-6B MS305716AWB MS3057-12B MS3057-10B MS3057-24B MS3057-20A MS3057-24A MS3057-4A MS3057-3A MS3057-10A-624 MS3057-12A624 MS3057-6A W/B MS3057-12A W/B MS3057-20A W/B MS3057-10A W/B MS3057-8A W/B 10-610125-243 MS3057-10A