AMPHENOL 1
ACCESSORIES
INTRODUCTION
Amphenol is a leading designer, manufacture and marketer of
interconnection solutions since 1972. Amphenol is the first Company
in India who started manufacturing high performance connectors. These
expertise and capabilities enables us to turn your interconnection
problems to solutions
Amphenol Back Shells and Accessories are developed for
environmental protection needs of circular connectors. These are
designed to meet the requirements of military standards. The Military
numbers indicated in this catalogue are for reference only.
This catalogue describes the standard and special purpose designs
used in Military and industrial circular connectors meeting the
following specifications.
MIL-C-5015
MIL-C-26482
MIL-C-38999
MIL-C-55116
Index
Contents Page
Series 62 IN 2
Series MS/97/97B 10
Series MS347 & MS Crimp 17
Series 38999 24
Series 164 31
AMPHENOL 2
ACCESSORIES
SERIES 62IN
These are the accessories compatible with miniature circular bayonet-coupled
connectors according to MIL-C-26482 Series 1. The standard finishes of these
accessories are Cadmium with olive drab chromate. Other alternate finishes are
also available on request.
62IN-584 Grommet seal & nut
62IN-585 Grommet seal & nut with Strain Relief Clamp
62IN-720 Clamp for Unscreened jacketed cable
62IN-776 General duty shell
62IN-736 Cap with chain for single hole mounting Receptacle
62IN-737 Cap with chain for cable Receptacle
62IN-738 Cap with chain for flange mounting Receptacle
62IN-742 Cap with chain for plug
62IN-810 Cap with Chord for plug
62IN-812 Cap with Chord fo flange Receptacle
62IN-813 Cap with Chord for single hole mount Receptacle
62IN-814 Cap with Chord for cable Receptacle
62IN-760 Flange mounting gasket
62IN-pg PG Adapter
AMPHENOL 3
ACCESSORIES
62IN - 584 - XX - XXS or P
Suffix XX - XXS or P enables grommet
to be matched to the insert arrangement.
584
13.84
13.84
13.84
13.84
13.84
13.84
13.84
13.84
12.73
14.25
17.43
20.60
23.78
26.95
30.13
33.30
36.75
39.65
08
10
12
14
16
18
20
22
24
Shell Size A G max
62IN - 585 XX- XXS or P
Grommet and nut with strain relief clamp.
The clamp prevents the flexing of the wires in
The immediate vicinity of the risers, so
avoiding the risk of leaks.
Shell Size
24
08
10
12
14
16
18
20
22
34.88
A max
25.17
25.17
25.17
24.51
28.07
28.07
32.64
32.64
44.07
G max
21.03
22.63
25.81
28.98
36.22
36.22
36.22
39.80
16.00
16.00
20.45
H max
4.09
4.90
8.05
9.65
16.00
19. 18
Suffix XX - xxS or P enables Grommet
to be matched to the jnsert arrangement.
585
G
max H
A o/all max
G max
A o/all max
Grommet seal and nut provides an environ-
mental for the exposed solder buckets in the
open back class T shells.
AMPHENOL 4
ACCESSORIES
A o/all max
G
max Z
Suffix XX specifies shell size
Shell
Size
08
10
12
14
16
18
20
22
24
A
max
27.56
26.92
29.46
34.54
40.26
45.34
50.32
55.39
56.28
G
max
14.25
17.43
20.60
23.78
26.95
30.13
33.30
36.75
39.65
closed
4.28
5.21
8.59
10.57
13.97
15.24
16.13
17.02
18.80
free
5.84
7.93
11.23
13.69
15.65
17.57
18.98
21.49
22.71
Z
62IN - 720 - XX
Clamp for unscreened jacketed cable
No grommet is supplied, for use with
50T, 51T and 56T styles.
Shell
Size
08
10
12
14
16
18
20
22
24
A
Max
23.80
23.80
23.8
23.80
23.8
23.80
23.8
23.80
23.8
M
Thred
1/2 - 28 UNEF
5/8 - 24 NEF
3/4 - 20 UNEF
7/8 - 20 UNEF
1 -20 UNEF
1.3/16 -18 NEF
1.3/16 - 18 NEF
1.7/16 - 18 NEF
1.7/16 - 18 NEF
A o/all max
M
62IN -776
General duty shell to accept conduit,
AN 3057 or
MS 3057 A cable clamps and heat
shrink sleeves.
AMPHENOL 1
ACCESSORIES
A
B
C
J Dia
Shell
Size
08
10
12
14
16
18
20
22
24
A
-6.35
76.2
76.2
88.9
88.9
88,9
88.9
101,6
101.6
101.6
B
-0.13
15.21
15.21
15.21
15.21
15.21
15.21
15.21
15.21
15.21
C
DIA MAX
18.64
21.82
25.4
28.57
31.75
34.92
38.1
41.27
44.45
J
- 0.127
11.63
14.81
17.98
22.76
25.93
29.11
32.28
35.46
38.63
62IN - 737
Caps and chains for cable
mounting receptacles
62IN - 736
Cap and chains for single hole
mounting receptacles
Shell
Size
08
10
12
14
16
18
20
22
24
A
-6.35
76.2
76.2
88.9
88.9
88.9
88.9
101.6
101.6
101.6
B
-0.13
13.23
13.23
13,23
13.23
13.23
13.23
13.23
13.23
14.12
C
DIA MAX
18.64
21.82
25.4
28.57
31.75
34.92
38.1
41.27
44.45
J
+ 0.127
14.68
17.86
22.63
25.81
29.39
32.16
35.33
38.51
41.68
A
B
C
J Dia
736
AMPHENOL 6
ACCESSORIES
738
B
C
J Dia
A
62IN - 736
Caps and chains for flange
mounting receptacles.
08
10
12
14
16
18
20
22
24
76.2
76.2
88.9
88.9
88.9
88.9
101.6
101.6
101.6
13.23
13.23
13.23
13.23
13.23
13.23
13.23
13.23
14.12
Shell
Size
A
- 6.35
C
dia
max
B
- 0.13
J
-0.127
18.64
21.82
25.4
28.57
31.75
34.92
38.1
41.27
44.45
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.86
A
B
C
J Dia
742
08
10
12
14
16
18
20
22
24
76.2
76.2
88.9
88.9
88.9
88.9
101.6
101.6
101.6
13.25
13.25
13.25
13.25
13.25
13.25
14.83
14.83
15.67
Shell
Size
A
- 6.35
C
dia
max
B
- 0.13
J
-0.127
18.26
21.43
25.4
28.57
31.75
34.92
38.1
41.27
44.45
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.86
62IN - 742
Caps and chains for plugs.
AMPHENOL 7
ACCESSORIES
812
B
C
A
J Dia
810
A
B
C
J Dia
62IN - 810
Caps and cords for plugs
62IN - 812
Caps and cords for flange
mounting receptacles.
08
10
12
14
16
20
22
24
76.2
76.2
88.9
88.9
88.9
101.6
101.6
101.6
13.25
13.25
13.25
13.25
13.25
14.83
14.83
15.67
Shell
Size
A
- 6.35
C
dia
max
B
- 0.13
J
-0.8
18.26
21.43
25.4
28.57
31.75
38.1
41.27
44.45
3.68
3.68
3.68
3.68
3.68
3.68
3.68
4.34
08
10
12
14
16
18
20
22
24
76.2
76.2
88.9
88.9
88.9
88.9
101.6
101.6
101.6
13.23
13.23
13.23
13.23
13.23
13.23
13.23
13.23
14.12
Shell
Size
A
- 6.35
C
dia
max
B
- 0.13
J
-0.08
18.64
21.82
25.4
28.57
31.75
34.92
38.1
41.27
44.45
3.68
3.68
3.68
3.68
3.68
3.68
3.68
3.68
4.34
AMPHENOL 8
ACCESSORIES
A
J Dia
B B
C C
B
C
A
J DiaJ Dia
814
813
62IN - 813
Caps and cords for single hole
mounting receptacles.
62IN - 814
Caps and cords for cable
mounting receptacles.
08
10
12
14
16
18
20
22
24
76.2
76.2
88.9
88.9
88.9
88.9
101.6
101.6
101.6
13.23
13.23
13.23
13.23
13.23
13.23
13.23
13.23
14.12
Shell
Size
A
- 6.35
C
dia
max
B
- 0.13
J
-0.25
18.64
21.82
25.4
28.57
31.75
34.92
38.1
41.27
44.45
14.68
17.86
22.63
25.81
29.39
32.15
35.33
38.51
41.68
08
10
12
14
16
18
20
22
24
76.2
76.2
88.9
88.9
88.9
88.9
101.6
101.6
101.6
13.23
13.23
13.23
13.23
13.23
13.23
13.23
13.23
14.12
Shell
Size
A
- 6.35
C
dia
max
B
- 0.13
J
-0.25
18.26
21.43
25.4
28.57
31.75
34.92
38.1
41.27
44.45
11.50
14.64
17.85
22.63
25.80
28.98
32.15
35.33
38.50
AMPHENOL 9
ACCESSORIES
62IN - 760
Flange mounting gasket for box
mounting and hermetic receptacles.
X
BA
L
P G
PG Adapter
08
10
12
14
16
18
20
22
24
20.62
23.82
26.18
28.57
30.96
33.32
36.52
39.70
42.87
15.08
18.26
20.65
23.01
24.61
27.00
29.36
31.75
34.92
12.90
16.07
19.25
22.42
25.60
28.77
31.95
35.13
38.30
3.30
3.30
3.30
3.30
3.30
3.30
3.30
3.30
3.96
1.06/0.40
1.06/0.40
1.06/0.40
1.06/0.40
1.06/0.40
1.06/0.40
1.06/0.40
1.06/0.40
1.06/0.40
Shell
Size
D
0.254
E
0.254
F
0.20
G
+0.254 H
Part No. For Shell Size
62IN08-PG7 8
10
12
14
16
20
62IN10-PG9
62IN12-PG9
62IN14-PG13.5
62IN16-PG9
62IN20-PG21
X Thread in inches
13.23
13.23
13.23
13.23
13.23
13.23
A
16.50
22.00
22.00
28.00
29.00
35.00
B
14.50
17.70
21.00
23.50
27.80
34.00
L
20.00
20.00
20.00
25.00
30.00
40.00
PG7
PG9
PG9
PG13.5
PG9
PG21
PG Thread
H
G sq
E
sq
D
F dia
760
+
-+
-+
-
AMPHENOL 10
ACCESSORIES
SERIES MS/97/97B
These are the accessories compatible with Threaded-coupled connectors according to
MIL-C-5015. The standard finishes of these accessories are Black anodic. Other
alternate finishes are also available on request.
MS-3057
MS-3420
MS-25042
MS-25043
97B-25042
97B-25043
MS-PG
MS-52000
MS-3105
MS
MS
Cable Clamp
Telescopic Bush - Neoprene
Cap for Plug
Cap for Receptacle
Cap for Plug
Cap for Receptacle
Pg Adapter
Flange Gasket
Dummy Receptacle
Strain Relief Backshell
Right Angle Backshell
A
BC
AMPHENOL 11
ACCESSORIES
Cable clamp
MS-3057
Use MS-3420 sleeves
MS-3057-4A
MS-3057-6A
MS-3057-8A
MS-3057-10A
MS-3057-12A
MS-3057-16A
MS-3057-20A
MS-3057-24A
Part number Shell Size
10SL,12S
14,14S
16,16S
18
20.22
24.28
32
36
Max OD of cable
7.94
11.1 1
14.29
15.87
19.05
23.81
31.70
34.92
A
20.90
21.27
23.37
23.37
23.54
25.78
28.00
29.36
B C
21.39
25.27
28.45
30.89
35.64
42.75
51.00
57.02
7.94
11.1 1
14.29
15.87
19.05
23.81
31.70
34.92
Thread in
inches
5/8-24
3/4-20
7/8-20
1-20
1 3/16-18
1 7/16-18
1 3/4-18
2-18
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
AB
F
D
E
0
45
Neoprene sleeve
MS-3420
Rubber bushing Protects wire bundles
and unjacketed cable from
possible damage by cable clamp.
All Dimensions are in mm
MS-3420-3
MS-3420-4
MS-3420-6
MS-3420-8
MS-3420-10
MS-3420-12
MS-3420-16
MS-3420-20
MS-3420-24
Part number A
3.30
5.59
7.92
11.10
14.27
15.87
19.05
23.80
31.75
B
5.33
7.67
10.84
14.02
15.62
18.80
23.54
31.50
34.67
c
9.50
12.70
15.59
18.77
21.94
26.90
26.36
40.41
46.79
D
73.02
69.85
66.67
63.50
60.32
57.15
53.97
50.80
47.62
E Rad in inches
1/32
1/32
1/32
1/16
1/16
1/16
1/16
1/16
1/16
F Rad
in inches
1/32
1/32
1/16
1/16
1/16
1/16
1/16
1/16
1/16
All Dimensions are in mm
AMPHENOL 12
ACCESSORIES
A
E
B MAX
C MAX
D
/
O
C MAX
A
E
D
B MAX //
Protective cap for
MS and 97 series
MS-25042
For Plugs
Has external threads and used on all plugs
where a coupling ring is provided
Protective cap for
MS & 97 series MS-25043
For receptacles
Has internal threads & is used on all
receptacles. Gasket is provided in the
dust cap forming a watertight seal.
MS 25042-10-1
MS 25042-12-1
MS 25042-14-1
MS 25042-16-1
MS 25042-18-1
MS 25042-20-1
MS 25042-22-1
MS 25042-24-1
MS 25042-28-1
MS 25042-32-1
MS 25042-36-1
MS 25042-40-1
MS Part number For connector size
MS 10S-1-SL
MS 12-12S
MS 14-14S
MS 16-16S
MS 18
MS 20
MS 22
MS 24
MS 28
MS 32
MS 36
MS 40
A Thread in inches
5/8-24
3/4-20
7/8-20
1-20
1 1/8-18
1 1/4-18
1 3/8-18
1 1/2-18
1 3/4-18
2 1/4-18
2 1/4-186
2 1/2-16
B
16.67
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
21.4
C
17.4
20.6
23.7
26.9
30
33
36.4
39.6
46
52
58.7
65
D E
4
4
4
4
4
4.8
4.8
4.8
4.8
5.6
5.6
5.6
102
115
115
115
115
127
127
140
197
197
197
-SLS-197
All Dimensions are in mm
MS 25043-10-1
MS 25043-12-1
MS 25043-14-1
MS 25043-16-1
MS 25043-18-1
MS 25043-20-1
MS 25043-22-1
MS 25043-24-1
MS 25043-28-1
MS 25043-32-1
MS 25043-36-1
MS 25043-40-1
MS Part number For connector size
MS 10S-1-SL
MS 12-12S
MS 14-14S
MS 16-16S
MS 18
MS 20
MS 22
MS 24
MS 28
MS 32
MS 36
MS 40
A
Thread in inches
5/8-24
3/4-20
7/8-20
1-20
1 1/8-18
1 1/4-18
1 3/8-18
1 1/2-18
1 3/4-18
2 -18
2 1/4-18
2 1/2-16
B
11-11
11-11
11-11
11-11
11-11
11-11
11-11
11-11
12-7
12-7
12-7
12-7
C
20.7
25.4
28.6
30.2
34.1
37.3
40.4
43.6
50
56.3
62.7
69
D E
3.6
3.6
3.6
3.6
3.6
4.4
4.4
4.4
4.4
4.8
4.8
4.8
102
115
115
115
115
127
127
140
197
197
197
197
All Dimensions are in mm
Notes : 1. For protective caps without chain or with nylon cord, contact factory
2. Standard - black anodised finish. For alternatives, contact factory.
3. Standard - straight For diamond knurling on caps, contact factory.
AMPHENOL 13
ACCESSORIES
E
A
B
E
Protective cap for
97B series
97B-25042
For Plugs
A
B
D
E
Has external grooves and is used on all plugs
97B 25042-10SL
97B 25042-14S
97B 25042-16S
Part number
97B 25042-16
97B 25042-18
97B 25042-20
97B 25042-22
97B 25042-24
97B 25042-28
97B 25042-32
97B 25042-36
97B 25042-40
For connector size
10SL
14S
16S
16
18
20
22
24
28
32
36
40
A Max
23.00
30.00
32.50
32.50
36.40
40.50
43.50
46.50
54.00
60.00
66.20
73.00
B
24.00
24.00
24.00
33.00
39.00
33.00
33.00
44.00
33.00
46.00
46.00
33.00
D
4.20
4.20
4.20
4.70
4.70
4.70
4.70
4.70
5.60
5.60
5.60
5.60
E
102
115
115
115
115
127
127
140
197
197
197
197
Protective cap
for 97B series
97B-25043
For receptalces
Has internal bayonet pins
and is used on all receptacles.
97B 25043-10SL
97B 25043-14S
97B 25043-16S
Part number
97B 2503-16
97B 25032-18
97B 25043-20
97B 25043-22
97B 25043-24
97B 25043-28
97B 25043-32
97B 25043-36
97B 25043-40
For connector size
10SL
14S
16S
16
18
20
22
24
28
32
36
40
A Max
23.00
30.00
32.50
32.50
37.00
40.50
43.50
47.50
54.00
60.50
67.00
73.00
B
15.50
15.50
15.50
21.20
21.20
21.20
21.20
21.20
21.20
21.20
21.20
21.20
D
4.20
4.20
4.20
4.20
4.20
4.70
4.70
4.70
5.60
5.60
5.60
5.60
E
102
115
115
115
115
127
127
140
197
197
197
197
All Dimensions are in mm
All Dimensions are in mm
Notes : 1. For protective caps without chain or with nylon cord, contact factory
2. Standard - black anodised finish. For alternatives, contact factory.
3. Standard - straight For diamond knurling on caps, contact factory.
D
AMPHENOL 14
ACCESSORIES
C
A
A
C
Dia. D
4 HOLES
Dia.
B
PG Adapter
Flange Gasket
MS-52000
PG
B
A
L
G
10SL
12S
14
16
18
20
22
24
28
36
Shell
Size A AA A AAA
G Thread
in inches
5/8-24
11/16-24
3/4-20
7/8-20
1-20
1 1/8-18
1 1/4-18
1 3/8-18
1 5/8-18
2 1/8-18
B BB B BBBL LL L LLL
30
21 26
A B L
23
25 2525
30
35
35
35
35
3535
3535
23
25
26
26
30 30
30
30
23
30
37 37
40
40
40
23
28
28
28
38
45 37 45 454545
57 57 57
44
40 404040
40
40
55 55
PG 9 PG 11 PG13 PG16 PG21 PG29 PG36
MS-101000
MS-108686
MS-101001
Part number
MS-101002
MS-108688
MS-101007
MS-101006
MS-108687
MS-101005
MS-101004
MS-101003
For connector Size
10SL
12S & 12
14S & 14
16S & 16
18
20
22
24
28
32
36
A Max
18.26
20.62
23.01
24.61
27.00
29.36
31.75
34.90
39.70
44.45
49.22
B
15.90
19.05
22.20
25.40
28.57
31.75
34.90
38.10
44.45
50.80
55.57
D
25.40
27.80
30.15
32.50
34.90
38.10
41.20
44.45
50.80
57.15
63.50
E
4.35
4.35
4.35
4.35
5.15
5.15
5.15
5.15
5.15
5.55
5.55
All Dimensions are in mm
All Dimensions are in mm
Notes : The dash number also indicates shell size.
Notes : For ordering information on flat gaskets and PG adaptors,contact factory.
AMPHENOL 15
ACCESSORIES
F MAX
A
B
D
E
OG
/
C
/
O
E
Dummy receptacle
MS-3105
L
N
A
Strain Relief Backshell Class E and F
MS-108155
MS-108156
MS-108157
Part number
MS-108158
MS-108158
MS-108159
A
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
MS-108160
MS-108161
MS-108162
MS-108164
MS-108165
MS-108163
A Thread Class 2B in
inches
5/8-24 NEF
11/16-24NEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20UNEF
1-20 UNEF
1 1/8-24 NS
1 1/4-18 NEF
1 3/8-18NEF
1 5/8-18 NEF
1 29/32-18 NS
2 1/16-20 UNS
L max for MS/97
54.07
54.07
55.90
55.90
64.41
65.94
67.41
67.41
73.28
73.28
74.75
74.75
L max for 97B
59.10
---
61.34
62.86
71.10
72.55
72.55
76.82
77.82
77.64
N
max
21.97
21.97
25.15
28.45
28.45
30.76
37.29
37.29
44.45
44.45
52.22
57.15
MS-3105-10S
MS-3105-12S
MS-3105-12
Part number
(see note)
MS-3105-14S
MS-3105-14
MS-3105-16S
A B
25-4
27.79
27.789
30.17
30.17
32.54
32.54
34.92
38.10
41.27
44.45
50.8
63.5
18.26
20.62
20.62
23.01
23.01
24.61
24.61
26.97
29.36
31.75
34.92
39.67
49.22
MS-3105-16
MS-3105-18
MS-3105-20
MS-3105-24
MS-3105-28
MS-3105-36
MS-3105-22
C E F G
D
Thread in inches
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.73
3.73
4.39
14-27
14-27
19-05
14-27
19.05
14.27
19.05
19.05
19.05
19.05
20.62
20.62
22.22
3.96
3.96
3.96
3.96
3.96
3.96
3.96
5.16
5.16
5.16
5.16
5.16
9.11
8.20
11.43
11.43
13.36
13.36
16.41
16.41
18.03
23.54
25.93
29.21
34.67
46.56
5/8-24
3/4-20
3/4-20
7/8-20
7/8-20
1-20
1-20
1 1/8-18
1 1/4-18
1 3/8-18
1 1/2-18
1 3/4-18
2 1/4-16
All Dimensions are in mm
All Dimensions are in mm
Notes : The dash number also indicates shell size.
Standard finish is cadmium Olive drab
AMPHENOL 16
ACCESSORIES
L
L1
Q
A
V
MS-108917
MS-108918
MS-108918
Part number
MS-108919
MS-108919
MS-108920
Connector Size
10SL
12S
12
14S
14
16S
16
18
20
22
24
28
32
36
MS-108920
MS-108921
MS-108922
MS-108924
MS-108925
MS-108926
MS-108923
MS-108927
A Thread Class 2B in
inches
5/8-24 NEF
11/16-24 NEF
11/16-24 NEF
3/4-20NEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20UNEF
1-20 UNEF
1 1/8-24 NS
1 1/4-18 NEF
1 3/8-18NEF
1 5/8-18 NEF
1 29/32-18 NS
2 1/16-20 UNS
L max for
MS/97
37.60
37.80
47.30
39.40
48.90
42.60
52.10
53.70
58.80
58.80
63.60
63.60
69.60
72.80
L max for
97B L 1
max
45.00
---
---
47.00
---
48.00
57.00
58.00
61.00
61.00
66.00
66.00
72.00
75.00
25.00
25.00
25.00
27.00
27.00
28.00
28.00
31.00
34.00
34.00
37.00
39.00
45.00
48.00
L 1
max
22.22
25.40
25.40
28.57
28.57
31.75
31.75
34.13
37.30
40.48
43.66
50.00
56.50
62.71
V Thread
in inches
5/8-24 UNEF
5/8-24 UNEF
5/8-24 UNEF
3/4-20UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20UNEF
1-20 UNEF
1 3/16-18 NS
1 3/16-18 UNEF
1 7/16-18 UNEF
1 7/16-18 UNEF
1 3/4-18 UNS
2-18 UNS
Standard finish is cadmium Olive drab
Note : Both versions, straight and diamond knurling available on back accessories. For details, contact factory.
All Dimensions are in mm
Right Angle Backshell
AMPHENOL 17
ACCESSORIES
M85049/26-1 Straight Shield Termination
M85049/26-2 Shielding Ring
M85049/31 Straight Back Shell
M85049/34 Straight Adapter
M85049/52-1 Straight SR Clamp
M85049/60-1 Shrink Boot Adapter
SERIES MS347 & MS CRIMP
These are the accessories compatible with connectors according to MIL-C-26482
Series 2 & MIL-C-5015 Crimp type. The standard finishes of these accessories are
Cadmium with olive drab chromate. Other alternate finishes are also available on
request.
AMPHENOL 18
ACCESSORIES
Dia C
Dia D
E
F
THREAD
B
Dia A
Straight Shield Termination
M85049/26-1
FINISH
MIL SPEC
SIZE CODE
See Dimension Table Below
20 N
M85049/26-1
N - ELECTROLESS NICKEL
W - CADMIUM, OLIVE DRAB
A - BLACK ANODIZE
28
32
36
8
10
12
14
16
18
20
22
24
Size
Code
MIL-C-26482
Series 2
8
10
12
14
16
18
20
22
24
MIL-C-5015
Crimp
85
10S,10SL
12S & 12
14S & 14
16S & 16
18
20
22
24
28
32
36
A
dia
15.68
18.65
21.80
25.00
28.25
30.94
34.17
37.29
40.47
50.10
56.37
62.72
B
Thread
Class 28
1/2-20UNE
5/8-24UNEF
3/4-20UNEF
7/8-20UNEF
1-20UNEF
1-1/16-18UNEF
1-3/16-18UNEF
1-5/16-18UNEF
1-7/16-18UNEF
1-3/4-18UNS
2-18UNS
2.1/46UN
C
dia
8.56
12.40
12.70
15.75
19.05
22.36
25.44
28.45
30.28
39.25
45.60
51.95
D
dia
6.35
8.26
10.67
13.72
17.02
20.05
23.22
26.40
28.25
35.29
41.53
47.00
E
32.44
32.44
32.44
32.44
32.44
32.44
32.44
32.44
32.44
36.66
36.66
36.66
F
13.72
13.72
13.72
13.72
13.72
13.72
13.72
13.72
13.72
17.84
17.84
17.84
AMPHENOL 19
ACCESSORIES
THIS MAY BE USED WITH M85049/26-1, M85049/33
A B
L
Shielding Ring
M85049/26-2
Colour
Code
GREEN
RED
BLUE
GRAY
BROWN
GREEN
PINK
RED
GRAY
GREEN
A dia
min
10.16
14.86
17.91
21.21
25.53
28.58
31.63
42.30
48.65
55.00
Max
10.42
15.12
18.17
21.47
25.79
28.83
31.88
42.55
48.90
55.25
STANDARD MATERIAL IS COPPER AND FINISH TIN PLATING CONSULT FACTORY FOR ANY VARIATIONS
SHELL SIZE
See Dimension Table Below
M85049/26-2
MIL SPEC
-10
28
32
36
8
10
12
14
16
18
20
22
24
Size
Code Min
12.40
16.77
19.82
23.12
27.44
30.48
33.53
44.20
50.55
56.90
Max
11.64
17.28
20.32
23.63
27.94
30.99
34.04
44.71
51.05
57.41
L
-0.20
6.35
11.18
B dia
AMPHENOL 20
ACCESSORIES
A Dia
C THREAD B
Straight Back Shell
M85049/31
W - Cadium, Olive Drab
N - Electroless Nickel
A - Black Anodize
FINISH
MIL SPEC
SIZE CODE
See Dimension Table Below
10 W
M85049/31
C Thread
Class 2B
28
32
36
MIL-C-26482 Series 2
8
10
12
14
16
18
20
22
24
8
10
12
14
16
18
20
22
24
Size
Code MIL-C-5015 Series 2
8S
10S,10SL
12S & 12
14S & 14
16S & 16
18
20
22
24
28
32
36
A
15.67
18.64
21.79
24.99
28.24
30.94
34.16
37.29
40.46
50.01
56.36
62.71
B
13.72
13.72
13.72
13.72
13.72
13.72
13.72
13.72
13.72
17.83
17.83
17.83
1/2-20 UNF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
1-20 UNEF
1-1/16-18 UNEF
1-3/16-18 UNEF
1-5/16-18 UNEF
1-7/16-18 UNEF
1-3/4-18 UNS
2-18 UNS
2-1/4-16 UN
Connector Shell Size
AMPHENOL 21
ACCESSORIES
S
N
W
THREAD
KNURL
V
THREAD
STANDARD FINISH IS CADMIUM OLIVE DRAB FOR OTHER FINISHES CONSULT FACTORY
-10
SHELL SIZE
See Dimension Table Below
M85049/34
MIL SPEC
Straight Adapter
For MS3114, MS3124 & MS 3474 Receptacles
8
10
12
14
16
18
20
22
24
Size
Code
F dia
+ 0.13
-0.02
8.18
11.16
14.33
16.97
20.15
23.12
26.04
29.22
32.39
S
max
20.63
20.63
20.63
20.63
20.63
20.63
23.02
23.02
23.79
N dia
+ 0.25
- 0.27
12.7
15.47
18.65
21.82
24.62
28.16
30.97
34.14
37.32
Thread UNEF Class2 A
V
5/8/-24
3/4-20
7/8-20
1-20
1-1/8-18
1-1/4-18
1-3/8-18
1-1/2-18
1-5/8-18
W
7/16-28
9/16-24
13/16-24
13/16-20
15/16-20
1-1/16-18
1-3/16-18
1-5/16-18
1-7/16-18
AMPHENOL 22
ACCESSORIES
A Dia
E CABLE ENTRY
C
Dia, A
B THREAD
8
10
12
14
16
18
20
22
24
28
32
36
Straight Strain Relief
M85049/52-1
W - Cadium, Olive Drab
N - Electroless Nickel
A - Black Anodize
20 N
FINISH
M85049/60-1
SIZE CODE
See Dimension Table Below
MIL SPEC
Size
Code MIL-C-26482
Series
8
10
12
14
16
18
20
22
24
MIL-C-5015
Crimp
8 S
10S, 10SL
12S & 12
14S & 14
16S & 16
18
20
22
24
28
32
36
For Connector Shell Size (REF) A
max
15.67
18.64
21.79
24.99
28.24
30.93
34.16
37.29
40.46
50.01
56.36
62.71
B
Thread
Class 2 B
½-20 UNF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
1-20UNEF
1-1/16 -18UNEF
1-3/16 -18UNEF
1-5/16 -18UNEF
1-7/16 -18UNEF
1-3/4 -18UNS
2 -18UNS
2-1/4 -16UNS
C
22.61
25.40
28.57
31.75
38.10
41.27
44.45
47.62
55.54
60.32
69.85
28.57
Max
5.18
7.26
10.56
12.09
15.90
17.93
21.10
24.28
27.47
30.10
31.75
34.92
E Cable Entry
Min
3.17
4.74
7.39
8.91
12.72
13.15
14.75
16.35
17.93
19.05
22.22
23.82
AMPHENOL 23
ACCESSORIES
D THREAD
B
C
A
STANDARD FINISH IS CADMIUM OLIVE DRAB FOR OTHER FINISHES CONSULT FACTORY
Shrink Boot Adapter
For MS3114,MS3124 & MS3474 Receptacles
20 N
W - Cadium, Olive Drab
N - Electroless Nickel
A - Black Anodize
FINISH
M85049/60-1
MIL SPEC
SIZE CODE
See Dimension Table Below
Size
Code
-8
-10
-12
-14
-16
-18
-20
-22
-24
-28
-32
-36
MIL-C-26482
Series 2
M83723 SR I & IIl
8
10
12
14
16
18
20
22
24
Connector Shell Size A
Dia
15.67
18.64
21.79
24.99
28.24
30.93
34.16
34-28
40.46
50.01
56.36
62.7
MIL-C-5015
Crimp
8 S
10S, 10SL
12S & 12
14S & 14
16S & 16
18
20
22
24
28
32
36
B
28.57
28.57
28.57
28.57
28.57
28.57
28.57
28.57
28.57
32.68
36.80
36.80
C
Dia
13.53
15.36
19.65
21.28
24.46
26.46
30.91
34.41
36.65
43.40
48.74
55.09
D
Thread
Class2 B
1/2-20UNF
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
1-20 UNEF
1-1/16-18 UNEF
1-3/16-18 UNEF
1-5/16-18 UNEF
1-7/16-18 UNEF
1-3/4-18 UNEF
2-18 UNEF
21/4-16 UNEF
AMPHENOL 24
ACCESSORIES
SERIES - D38999
These are the accessories compatible with connectors according to MIL-C-38999
Series 3. The standard finishes of these accessories are Cadmium with olive drab
chromate. Other alternate finishes are also available on request.
M85049/14
M85049/33-2
M85049/35
M85049/38
M85049/58
M85049/69
Back Shell
Straight Shield Termination
Straight Adapter
Straight Strain Relief
Plotting Boot Ring
Shrink Boot Adapter
AMPHENOL 25
ACCESSORIES
A DIA
MAX.
B
MAX.
C
THREAD
Back Shell
M85049/14
MIL SPEC W - Cadium, Olive Drab
N - Electroless Nickel
A - Black Anodize
M85049/14 1 17 W
FINISH
CONFIGURATION
1 - Rotating coupling nut.
SIZE CODE
See Dimension Table Below.
9
11
13
15
17
19
21
23
25
M12 x 1.0-0.10R
M15 x 1.0-0.10R
M18 x 1.0-0.10R
M22 x 1.0-0.10R
M25 x 1.0-0.10R
M28 x 1.0-0.10R
M31 x 1.0-0.10R
M34 x 1.0-0.10R
M37 x 1.0-0.10R
A max
21.79
24.99
29.38
32.48
35.71
38.50
41.70
44.90
47.98
B max
16.76
16.76
16.76
16.76
16.76
16.76
16.76
16.76
16.76
M85049 Self Locking Only
Size
Code
C
Thread
Metric RH Class 6H
AMPHENOL 26
ACCESSORIES
DE
F
C
BA
HOLES FOR SAFETY WIRE
(3 EQUALLY SPACED)
Straight Shield Termination
M85049/33
8
10
12
14
16
18
20
22
24
9
11
13
15
17
19
21
23
25
8
10
12
14
16
18
20
22
24
19.05
21.59
25.40
27.94
31.75
35.56
38.10
41.91
43.18
13.72
13.72
13.72
13.72
13.72
13.72
13.72
13.72
13.72
28.88
28.88
28.88
28.88
28.88
28.88
28.88
28.88
28.88
8.82
12.65
12.83
16.00
19.31
22.61
25.66
28.71
30.54
6.74
8.72
11.10
14.28
17.45
20.63
23.80
26.57
28.58
8
10
12
14
16
18
20
12
24
CONFIGURATION
1) Straight adapter.
2) Straight shield termination
3) Straight Shield termination
Supplied with M85049/26.2 shield ring SIZE CODE
See Dimension Table Below.
FINISH
W - CADMIUM, OLIVE DRAB
N - ELECTROLESS NICKEL
A - BLACK ANODIZE
M85049/33 - 2 - 10 W
Size
Code
MIL-C-3899
Shell Size
Series I Series II
A
dia
max
B
max C
max
D
dia
max
F
min USE M85049/26-2
Crimp Ring
AMPHENOL 27
ACCESSORIES
C
Thread
V
THREAD
F
G
8
10
12
14
16
18
20
22
24
8
10
12
14
16
18
20
22
24
9
11
13
15
17
19
21
23
25
7/16-28
9/16-24
11/16-20
13/16-20
15/16-20
1 1/16-18
1 3/16-18
1 5/16-18
1 7/16-18
17.48
19.05
7.14
10.32
13.49
16.67
19.83
22,23
25.40
28.58
31.57
5/8-24
3/4-20
7/8-20
1-20
1 3/16-18
1 7/16-18
1/2-28
Size
code
MIL-C-38999 Shell Size
Series 11 Series 1
C
Thread
Class 2B
UNEF
F
max
G
min
dia
V
Thread
Class 2A
UNEF
Straight Adapter
M 85049/35
M85049/35
MIL SPEC SIZE CODE
See dimension Table below
- 14
AMPHENOL 28
ACCESSORIES
B THREAD
E
CABLE ENTRY
HOLES FOR DIA. 0.51 MAX.
SAFETY WIRE (3 EQ. SPACED)
A DIA.
D
C
9
11
13
15
17
19
21
23
25
A
max
21.79
24.99
29.39
32.49
35.71
38.50
41.70
44.91
47.98
M12-1.0-0 100R
M15-1.0-0.100R
M18-1.0-0.100R
M22-1.0-0.100R
M25-1.0-0.100R
M28-1.0-0.100R
M31-1.0-0.100R
M34-1.0-0.100R
M37-1.0-0.100R
27.9
27.9
30.5
31.8
34.3
40.6
43.2
47.0
49.5
21.6
22.9
27.9
29.2
33.0
38.1
40.6
43.2
45.7
5.94
5.94
8.83
11.61
16.10
15.60
17.73
20.90
21.67
Shell
Size B Metric R. H.
Thread Class
6H
C
max
D
max
E
Cable Clamp
max
min
2.49
3.89
4.83
6.60
7.19
8.26
8.71
9.68
10.62
Straight Strain Relief
M 85049/38
M 85049/38
MIL SPEC
SIZE CODE
See dimension Table Below
- 17 A
FINISH
W- CADMIUM,OLIVE DRAB
A- BLACK ANODIZE
N- ELECTROLESS NICKEL
AMPHENOL 29
ACCESSORIES
B THREAD
A
DIA.
D
DIA.
C
DIA.
SIZE CODE
See dimension Table BELOW
8
10
12
14
16
18
20
22
24
8
10
12
14
16
18
20
22
24
15.24
18.54
21.59
24.80
28.00
31.15
34.35
37.50
40.70
7/16-28
9/16024
11/16-24
13/16-20
15/16-20
1-1/16-18
1-3/16-18
1-5/16-18
1-7/16-18
8.74
11,99
14.89
18.06
21.24
23.93
27.11
30.28
33.46
12.70
15.88
19.05
22.23
25.40
28.58
31.75
34.93
38.10
Size
Code
MIL - C-38999 Shell Size
9
11
13
15
17
19
21
23
25
Series I Series II
A
max
dia
B
Thread
UNEF
Class 2B
C
+.005
dia
D
+.005
dia
Potting Boot Ring
M85049/58
M85049/58
MIL SPEC
-20
STANDARD FINISH IS CADMIUM OLIVE DRAB FOR OTHER FINISHES CONSULT FACTORY
AMPHENOL 30
ACCESSORIES
18.03
MAX D
B Dia
C Dia
Holes for Dia. 0.51 Max.
Holes for safety wire (3 equally spaced)
3.43
10.80
Max
16.26
Max
A Dia
Shrink Boot Adapter
M85049/69
19.1
21.6
25.4
29.20
31.8
35.6
39.40
41.9
47.00
6.35
9.52
12.70
15.88
19.05
20.62
23.80
26.97
30.18
9
11
13
15
17
19
21
23
25
13.54
15.37
19.66
21.29
24.46
26.47
30.91
34.42
36.65
1.12
1.12
1.12
1.12
1.12
1.12
1.75
1.75
1.75
Size
Code
A
Dia
max
B
max
C
dia
max
D
+.00
-0.20
M85049/69
MIL SPEC
SIZE CODE
See Dimension Table Below
- 17 A
FINISH
A - Black Anodize
w - Cadmium Olive Drab
N - Electroless Nickel
D
DRAIN HOLE
Omit if not required
AMPHENOL 31
ACCESSORIES
SERIES 164
These are accessaries compatible with connectors to MIL-C-55116.
The standard finishes of these accessories are Cadmium with olive drab chromate.
Other alternate finishes are also available on request.
164-895 Cap for receptacles
164-896 Cap for plug
164-377 Cap for 10 pin Receptacle
AMPHENOL 32
ACCESSORIES
19.71 14.77
164-896
23.50
21.82
164-895
100 chain length
19.71
18.30
127 chain length
17.34
26.30
28.88
Accessories
Cap and chain
These cap and chain assemblies are used with 5 and 6 pin connectors as protective covers giving
additional protection against moisture, dust and sand. The caps are manufactured from aluminum
and black anodized The chain is manufactured from. stainless steel and is passivated
For
Connector
Part
Number
164-895
164-896
164-183
164-229
All Dimensions are in mm
Cap and chain for ten pin waterproof audio receptacles (U-79 / U)
Part No. 164-377
Special accessories
Please contact factory with specifications and drawings. Amphetronix has in-house capability to meet and custom build your special accessories
requirements for circular connectors.
Notice :
All information, including illustrations given herein is believed to be accurate at the time printing. In Lieu of design advances. Amphenol reserves the
right to change specifications without notice. This publication ACR 91/00-01 supersedes all existing Amphenol literature on backshells & accessories
for circular connectors.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Amphenol:
MS3057-28A MS3057-8A W/BUSHING MS3057-16B MS3057-20B MS3057-6B MS305716AWB MS3057-12B
MS3057-10B MS3057-24B MS3057-20A MS3057-24A MS3057-4A MS3057-3A MS3057-10A-624 MS3057-12A-
624 MS3057-6A W/B MS3057-12A W/B MS3057-20A W/B MS3057-10A W/B MS3057-8A W/B 10-610125-243
MS3057-10A
