SBL30L30CTW REVERSE VOLTAGE - 32 Volts FORWARD CURRENT - 30 Amperes SCHOTTKY BARRIER RECTIFIER FEATURES TO-220AB * Metal of silicon rectifier, majority carrier conduction * Guard ring for transient protection * Low power loss, high efficiency * Very low forward voltage drop * High surge capability * Plastic package has UL flammability classification 94V-0 * For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications MECHANICAL DATA * Case : TO-220AB mold plastic * Polarity : As marked on the body * Weight : 0.08 ounces, 2.24 grams * Mounting position : Any * Max. mounting torque = 0.5 N.m (5.1 Kgf-cm) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. PARAMETER SYMBOL SBL30L30CTW UNIT Maximum Repetitive Peak Reverse Voltage VRRM 32 V Maximum RMS Voltage VRMS 22.4 V VDC 32 Maximum DC Blocking Voltage Average Rectified Output Current @TC=120C I(AV) 30 A Peak Forward Surge Current 8.3ms single half sine-wave @Tj=25C IFSM 220 A Maximum Forward Voltage (Note 1) IF=30A@Tj=25C IF=15A@Tj=125C IF=30A@Tj=125C VF 0.57 0.38 0.50 V Maximum DC Reverse Current at Rated DC Blocking Voltage Tj=25C Tj=125C IR 1.5 350 mA CJ 1650 PF RJC 1.5 0.8 C/W TJ -55 to +150 C TSTG -55 to +150 C Typical Junction Capacitance per element (Note 2) Typical Thermal rESISTANCE (Note 3) Operating junction temperature range Storage temperature range Notes : (1) (2) (3) Per diode Per device REV. 0, Aug-2009, KTHC80 300us Pulse Width, 2% Duty Cycle. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Thermal Resistance Junction to Case. Device mounted on 200 x 200 x 5 mm Aluminium plate. RATING AND CHARACTERISTIC CURVES SBL30L30CTW FIG.1- FORWARD CURRENT DERATING CURVE FIG.2- MAXIMUM NON-REPETITIVE SURGE CURRENT 300 14 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 16 Rthj-a=Rthj-c 12 Rthj-a=20C/W 10 Rthj-a=30C/W 8 6 T 4 2 tp/T=50% tp 250 200 150 100 50 8.3ms Single Half Sine-Wave 0 0 0 25 50 75 100 125 1 150 10 O FIG.3- TYPICAL REVERSE CHARACTERISTICS FIG.4- TYPICAL FORWARD CHARACTERISTICS 100 10 INSTANTANEOUS FORWARD CURRENT, (A) 100 INSTANTANEOUS REVERSE CURRENT, (mA) 100 NUMBER OF CYCLES AT 60Hz LEAD TEMPERATURE, ( C) Tj=125C 1 0.1 Tj=25C 0.01 0.001 10 1 Tj=25C, PULSE WIDTH 300us, 2% Duty Cycle 0.1 0 20 40 60 80 100 120 0.1 0.2 PERCENT OF RATED PEAK REVERSE VOLTAGE, (V) 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG.5- TYPICAL JUNCTION CAPACITANCE CAPACITANCE, (pF) 10000 1000 Tj=25C, f=1MHz 100 0.1 1 10 100 REVERSE VOLTAGE, (V) Note: LSC and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes, to this document, and the products and services described herein at anytime, without notice. 1.1