3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Pin Strip Header
.100″ and .100″ × .100″ Dual Insulator, Board Stacking 929 Series
TS-0817-05
Sheet 1 of 3
• 36 sizes (1 to 36) position
• Standard .025 inch square posts
• .100 inch spacing between posts
• Dual insulation
• Board pin retention feature available
• See Regulatory Information Appendix (RIA)
for chemical compliance information.
Date Modified: March 8, 2007
Physical
Insulation
Material: Glass Filled Polyester (PBT) or PCT
Flammability: UL 94V-0
Color: Black
Contact
Material: Copper Alloy
Plating
Underplating: 50 μ″ [ 1.27 μm ] Nickel
Wiping Area: 10 μ″ [ 0.25 μm ] Gold
Marking: None
Electrical
Current Rating: 2.5 A
Insulation Resistance: > 5 × 109Ω at 500 VDC
Withstanding Voltage: 1500 VRMS at Sea Level
Environmental
Temperature Rating: -40°C to +105°C
Process Rating: 260°C (per J-STD-020C) for PCT insulator parts
(PBT insulator version), maximum insulator temperature 191°C
(Wave Solder Process Only)
Moisture Sensitivity Level: 1 (per J-STD-020C) for PCT insulator parts
UL File No.: E68080
DISCONTINUED 1/17
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Pin Strip Header
.100″ and .100″ × .100″ Dual Insulator, Board Stacking 929 Series
Mating Length
Code
Tail Length Code Dimensions
A B D
4217 24 .238 [6.05] .110 [2.79] .380 [9.65]
4217 28 .235 [5.97] .110 [2.79] .500 [12.70]
4217 32 .240 [6.10] .110 [2.79] .630 [16.00]
6121 01 .100 [2.54] .355 [9.02] .390 [9.91]
6581 01 .100 [2.54] .465 [11.81] .400 [10.16]
6781 01 .100 [2.54] .545 [13.84] .600 [15.24]
6101 01 .100 [2.54] .350 [8.89] .900 [22.86]
TS-0817-05
Sheet 2 of 3
± .005
± .1 ± .01
Tolerance Unless Noted
.0 .00 .000
Inch
[ ] Dimensions for
Reference only
Inch
[mm]
Ordering Information
Note:
C = .10" [2.5] × pin quantity per row. Dimension C is a maximum when the pin strip is cut to length,
not when the strip is broken to length. Breaking strips to length not recommended.
9XXXXX-XX-XX-XX
Pin Quantity
(01-36)
Tail Length Code
(See Table)
Mating Length Code
(See Table)
Board Retention Feature
2 = None
R = Kinked Tails
One Row .115 [2.92]
C
See Note
.100
[2.54]
.100
[2.54]
.050 [1.27]
.060 [1.52]
.115 [2.92]
B ± .015
D ± .015
A ± .008
.100 Typ
[2.54]
.025 Sq Typ
[0.64]
2X .05 Max
[1.27]
(See Note 1)
∅ .040 ± .003 After Plating
[1.02]
.100
[2.54]
Recommended Hole Pattern
Plating Suffix
I = 10μ″ [0.25μm] all over, PBT insulator
(RIA E1 & C1 apply)
EU = 10μ″ [0.25um] all over, PCT insulator
(RIA E1 & C1 apply)
DISCONTINUED 1/17
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Pin Strip Header
.100″ and .100″ × .100″ Dual Insulator, Board Stacking 929 Series
Tail Length Code Dimensions
A B D
4227 24 .238 [6.05] .110 [2.79] .380 [9.65]
4227 28 .235 [5.97] .110 [2.79] .500 [12.70]
4227 32 .240 [6.10] .110 [2.79] .630 [16.00]
6122 01 .100 [2.54] .355 [9.02] .390 [9.91]
6582 01 .100 [2.54] .465 [11.81] .400 [10.16]
6782 01 .100 [2.54] .545 [13.84] .600 [15.24]
6102 01 .100 [2.54] .350 [8.89] .900 [22.86]
TS-0817-05
Sheet 3 of 3
± .005
± .1 ± .01
Tolerance Unless Noted
.0 .00 .000
Inch
[ ] Dimensions for
Reference only
Inch
[mm]
Ordering Information
Two Row
Note:
C = .10" [2.5] × pin quantity per row. Dimension C is a maximum when the pin strip is cut to length Breaking dual row strips to length is not recommended.
9XXXXX-XX-XX-XX
Pin Code
(Pins per Row)
Tail Length Code
(See Table)
Mating Length Code
(See Table)
Board Retention Feature
2 = None
R = Kinked Tails
.060
[1.52]
.100
[2.54]
.100
[2.54]
.100
[2.54]
.025 Sq Typ
[0.64]
.100 Typ
[2.54]
B ± .015
A ±
.015
.215
[5.46]
C
See Note
2X .05 Max
[1.27]
(See Note 1)
Recommended Hole Pattern
D ±
.008
.100
[2.54]
.100
[2.54]
Plating Suffix
I = 10μ″ [0.25μm] all over, PBT insulator
(RIA E1 & C1 apply)
EU = 10μ″ [0.25um] all over, PCT insulator
(RIA E1 & C1 apply)
Ø
.040 ± .003 After Plating
[1.02]
Mating Length
Code
DISCONTINUED 1/17
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon
information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/17/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision
2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party
suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217-B
DISCONTINUED 1/17
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part does not contain any of the following substances in excess of the following maximum
concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium,
polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise
stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by
third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
20
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part does contain a substance, as detailed in the chart below, in excess of the following
maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless
otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform
with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in
accordance with the product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the
accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended
application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s
current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in
writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER
WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any
indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3
Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/interconnects RIA-2217-B
© 3M 2007
Name and Content of Hazardous Substances or Elements
DISCONTINUED 1/17
