AMP* Arcing-Protective Cap Kit 849254-1 for LGH*-4 High Voltage Series Receptacies Instruction Sheet 408-9890 23APR93 RevO RECEPTACLE \cm \ @ \ a PROTECTIVE CAP (Glass ao | 5 pe (Re SS 1-14 UNF-2A THREAD (Ref) 1. INTRODUCTION This instruction sheet covers the assembly of the protective cap to LGH, LGH-4 High Voltage Series Receptacles. 2. DESCRIPTION (Figure 1) Each kit contains an Oring and a cap (dust cover). 3. ASSEMBLY mitcame = fe receptacle contains a contact within the cavity that has high voltage potential if connected. Turn OFF the recepiacie power before proceeding with Step 2 below. Figure f cad 1, Place Oring evenly into protective cap. 2. Screw cap onto receptacle (ref) until O ring fits snugly against receptacle end. 4, REPLACEMENT Order replacement or additional Arching-Protective Cap Kits through your AMP representative, or call 1-800-526-5142, or send a facsimile of your purchase order to 1-717-986-7605, or write to: CUSTOMER SERVICE (38-35) AMP INCORPORATED P.O. BOX 3608 HARRISBURG PA 17105-3608 AMP Incorporated, Harrisburg, PA 17105 TOOLING ASSISTANCE CENTER 1-800-722-1111 AMP FAX/PRODUCT INFO 1-800-522-6752 4 of1 This AMP controlled document is subject to change. For latest revision call the AMP FAX number. @ Copyright 1993 by AMP Incorporated. All International Rights Reserved. "Trademark