Click on Series name for product info on aimtec.com Series AM2S-Z 2 Watt | DC-DC Converter FEATURES: * * * * RoHS Compliant 4 Pin SIP Package Ultra Miniature Package High Efficiency up to 84% * * * Operating Temperature -40oC to +85oC Input / Output Isolation 1000 and 3000VDC Pin Compatible With Multiple Manufacturers Models Single Output Input Current Full | No Load (mA) Input Voltage (V) Output Voltage (V) Output Current Max (mA) Capacitive Load, Max (F) AM2S-0503SZ AM2S-0505SZ AM2S-0507SZ AM2S-0509SZ AM2S-0512SZ AM2S-0515SZ AM2S-0518SZ AM2S-0524SZ AM2S-1203SZ AM2S-1205SZ AM2S-1207SZ AM2S-1209SZ AM2S-1212SZ AM2S-1215SZ AM2S-1218SZ AM2S-1224SZ AM2S-2403SZ AM2S-2405SZ AM2S-2407SZ AM2S-2409SZ AM2S-2412SZ AM2S-2415SZ AM2S-2418SZ AM2S-2424SZ AM2S-4803SZ AM2S-4805SZ AM2S-4807SZ AM2S-4809SZ AM2S-4812SZ AM2S-4815SZ AM2S-4818SZ AM2S-4824SZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 400 400 278 222 167 133 111 83 400 400 278 222 167 133 111 83 400 400 278 222 167 133 111 83 400 400 278 222 167 133 111 83 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 487 487 152 213 208 203 198 198 198 203 120 170 166 162 158 158 158 162 74 104 104 99 99 99 99 99 38 53 52 51 52 51 AM2S-0503SH30Z AM2S-0505SH30Z AM2S-0507SH30Z AM2S-0509SH30Z AM2S-0512SH30Z AM2S-0515SH30Z AM2S-0518SH30Z AM2S-0524SH30Z AM2S-1203SH30Z AM2S-1205SH30Z AM2S-1207SH30Z AM2S-1209SH30Z AM2S-1212SH30Z 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 400 400 278 222 167 133 111 83 400 400 278 222 167 470 470 470 470 470 470 470 470 470 470 470 470 470 487 487 152 213 208 203 198 198 198 203 120 170 166 Model www.aimtec.com F 051e R11.H Tel: +1 514 620 2722 1 of 5 Isolation (VDC) Efficiency (%) 35 35 35 35 35 35 35 35 20 20 20 20 20 20 20 25 18 18 18 18 18 18 18 18 10 10 10 10 10 10 10 10 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 78 81 80 83 84 85 80 86 72 81 80 85 85 85 84 85 81 83 82 85 86 86 83 88 74 79 83 83 81 82 82 86 35 35 35 35 35 35 35 35 20 20 20 20 20 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 78 81 80 83 84 85 80 86 72 81 80 85 85 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2S-Z 2 Watt | DC-DC Converter Models Single Output (continued) Model Input Voltage (V) AM2S-1215SH30Z AM2S-1218SH30Z AM2S-1224SH30Z AM2S-2403SH30Z AM2S-2405SH30Z AM2S-2407SH30Z AM2S-2409SH30Z AM2S-2412SH30Z AM2S-2415SH30Z AM2S-2418SH30Z AM2S-2424SH30Z AM2S-4803SH30Z AM2S-4805SH30Z AM2S-4807SH30Z AM2S-4809SH30Z AM2S-4812SH30Z AM2S-4815SH30Z AM2S-4818SH30Z AM2S-4824SH30Z 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 43.2-52.8 Output Voltage (V) 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 Output Current Max (mA) 133 111 83 400 400 278 222 167 133 111 83 400 400 278 222 167 133 111 83 Capacitive Load, Max (F) 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 Input Current Full | No Load (mA) 162 20 158 20 158 25 158 18 162 18 74 18 104 18 104 18 99 18 99 18 99 18 99 10 99 10 38 10 53 10 52 10 51 10 52 10 51 10 Isolation (VDC) Efficiency (%) 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 85 84 85 81 83 82 85 86 86 83 88 74 79 83 83 81 82 82 86 Input Specifications Parameters Nominal Typical Maximum 5 12 24 48 4.5-5.5 10.8-13.2 21.6-25.4 43.2-52.8 -0.7 - 7 -0.7 - 15 -0.7 - 28 -0.7 - 54 Voltage range Filter Turn on Transient Process Time Start-up time Units VDC Capacitor 25 200 0-7 0-15 0-28 0-54 100 5 Vin 12 Vin 24 Vin 48 Vin Absolute Maximum Rating Peak Input Voltage time ms ms VDC ms Isolation Specifications Parameters Conditions Tested I/O voltage Resistance Capacitance Typical 60 sec Rated Units 1000 or 3000 VDC MOhm pF > 1000 60 Output Specifications Parameters Conditions Voltage Accuracy Short Circuit Protection Over Current Protection Line Voltage Regulation Load Voltage Regulation Load Voltage Regulation (3.3V Output Models) Temperature Coefficient Ripple & Noise Rising Time For 1.0% of Vin 20...100% load 20...100% load At 20MHz Bandwidth Typical Maximum 3 Momentary (1sec) 110% Iout max 1.2 10 20 0.02 150 100 Units % % % % %/oC mV p-p ms General Specifications Parameters Switching Frequency www.aimtec.com F 051e R11.H Conditions Typical 100% load 70 Tel: +1 514 620 2722 2 of 5 Maximum Units KHz Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2S-Z 2 Watt | DC-DC Converter oC Operating Temperature -40 to +85 oC Storage Temperature -40 to +125 oC Max Case Temperature 100 Cooling Free air convection Humidity 95 % Case material Plastic UL94-VO Weight 1.9 g Dimensions(L x W x H) 0.46 x 0.29 x 0.40 inches 11.68 x 7.50 x 10.15 mm MTBF >1121 000hrs(MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters Agency Approval CE EN55032 (Radiated Emissions) class B EN55024 (Noise Immunity) IEC61000-4-2(ESD) IEC61000-4-3(Radiated immunity) Standards Pin Out Specifications Pin 1000 and 3000VDC 1 2 3 4 -V Input +V Input -V Output +V Output Dimensions 11.68 (0.46) 7.50 (0.29) PRINTED FACE 10.15 (0.40) 9.65 (0.38) Derating 0.50 (0.02) Free Air Convection 2.54 (0.10) 100 Output Power (%) 3.05 (0.12) 80 Safe Operating Area 60 0.50 (0.02) 2.00 (0.08) 40 0.30 (0.01) 7.50 (0.29) 20 0 - 40 - 20 0 20 40 60 80 85 100 0.50 (0.02) Ambient Temperature C www.aimtec.com F 051e R11.H Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2S-Z 2 Watt | DC-DC Converter Application Circuit, & Conducted Emissions L C1 +V output +V input C2 DC/DC Converter -V input Load -V output C3 Input Voltage (VDC) C1 5 12 15 24 48 2.2uF/100V 2.2uF/100V 2.2uF/100V 2.2uF/100V 2.2uF/100V L C2 C3 18uH N/A N/A 18uH N/A N/A 18uH N/A N/A 18uH 2.2uF/100V 470pF/2KV 18uH 2.2uF/100V 470pF/2KV Typical Efficiency Example Charts AM2S-2405SZ Efficiency vs. Loading 100 80 Eff % 60 40 20 0 20% 40% 60% 80% 100% Loading % Eff % AM2S-1205SZ Efficiency vs. Loading 100 80 60 40 20 0 20% 40% 60% 80% 100% Loading % www.aimtec.com F 051e R11.H Tel: +1 514 620 2722 4 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2S-Z 2 Watt | DC-DC Converter AM2S-2405SZ Efficiency vs. Loading 100 80 Eff % 60 40 20 0 20% 40% 60% 80% 100% Loading % AM2S-4824SZ Efficiency vs. Loading 100 Eff % 80 60 40 20 0 20% 40% 60% 80% 100% Loading % NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3.Mechanical drawings and specifications are for reference only. 4.All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec's standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R11.H Tel: +1 514 620 2722 5 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only