Product data sheet Automation technology - sensors and actuators Product description M12-A male panel mount connector, Contacts: 4, unshielded, dip-solder, IP68, UL, PG9, front mounting Area Order number M12-A series 713 86 0531 1000 00004 Illustration Conductor layout Scale drawing Contact arrangement (Plug-in side) You can find the assembly instructions on the next page. Technical data General features Order number Notice Connector design Version Connector locking system Termination Degree of protection Temperature range from/to Mechanical operation Weight (g) Customs tariff number 86 0531 1000 00004 Please note that, due to the change from the old to the new order number, there may be deviations in the technical specifications. For questions about product details, please use the `Contact Customer Service' form on the right. male panel mount connector connector male straight screw dip-solder IP68 -40 C / 85 C > 100 Mating cycles 12 85369010 Date: 2021-02-23 - Page 1 of 4 Product data sheet Automation technology - sensors and actuators Product description M12-A male panel mount connector, Contacts: 4, unshielded, dip-solder, IP68, UL, PG9, front mounting Area Order number M12-A series 713 86 0531 1000 00004 Technical data Electrical parameters Rated voltage Rated impulse voltage Rated current (40 C) Insulation resistance Pollution degree Overvoltage category Insulating material group EMC compliance 250 V 2500 V 4 A (3 A UL) > 10 3 II III unshielded Material Housing material Contact body material Contact material Contact plating REACH SVHC Zinc die-cast nickelplated PA black CuZn (brass) Au (gold) CAS 7439-92-1 (Lead) Authorization/approvals Approval 1 UL Date: 2021-02-23 - Page 2 of 4 Product data sheet Automation technology - sensors and actuators Product description M12-A male panel mount connector, Contacts: 4, unshielded, dip-solder, IP68, UL, PG9, front mounting Area Order number M12-A series 713 86 0531 1000 00004 Assembly instructions / Panel cut-out Date: 2021-02-23 - Page 3 of 4 Powered by TCPDF (www.tcpdf.org) Product data sheet Automation technology - sensors and actuators Product description M12-A male panel mount connector, Contacts: 4, unshielded, dip-solder, IP68, UL, PG9, front mounting Area Order number M12-A series 713 86 0531 1000 00004 Security notices The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application. Plug connectors with enclosure protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre. Date: 2021-02-23 - Page 4 of 4