Product data sheet
Automation technology - sensors and actuators
Product description M12-A male panel mount connector, Contacts: 4, unshielded, dip-solder, IP68, UL, PG9, front mounting
Area M12-A series 713
Order number 86 0531 1000 00004
Illustration Conductor layout Scale drawing
Contact arrangement (Plug-in side)
You can find the assembly instructions on the next
page.
Technical data
General features
Order number 86 0531 1000 00004
Notice Please note that, due to
the change from the old
to the new order
number, there may be
deviations in the
technical specifications.
For questions about
product details, please
use the ‘Contact
Customer Service’ form
on the right.
Connector design male panel mount
connector
Version connector male straight
Connector locking system screw
Termination dip-solder
Degree of protection IP68
Temperature range from/to -40 °C / 85 °C
Mechanical operation > 100 Mating cycles
Weight (g) 12
Customs tariff number 85369010
Date: 2021-02-23 - Page 1 of 4
Product data sheet
Automation technology - sensors and actuators
Product description M12-A male panel mount connector, Contacts: 4, unshielded, dip-solder, IP68, UL, PG9, front mounting
Area M12-A series 713
Order number 86 0531 1000 00004
Technical data
Electrical parameters
Rated voltage 250 V
Rated impulse voltage 2500 V
Rated current (40 °C) 4 A (3 A UL)
Insulation resistance > 10⁸ Ω
Pollution degree 3
Overvoltage category II
Insulating material group III
EMC compliance unshielded
Material
Housing material Zinc die-cast nickel-
plated
Contact body material PA black
Contact material CuZn (brass)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
Authorization/approvals
Approval 1 UL
Date: 2021-02-23 - Page 2 of 4
Product data sheet
Automation technology - sensors and actuators
Product description M12-A male panel mount connector, Contacts: 4, unshielded, dip-solder, IP68, UL, PG9, front mounting
Area M12-A series 713
Order number 86 0531 1000 00004
Assembly instructions / Panel cut-out
Date: 2021-02-23 - Page 3 of 4
Product data sheet
Automation technology - sensors and actuators
Product description M12-A male panel mount connector, Contacts: 4, unshielded, dip-solder, IP68, UL, PG9, front mounting
Area M12-A series 713
Order number 86 0531 1000 00004
Security notices
The connector must not be plugged or unplugged under load. Non-observance and improper use can
result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical
equipment construction. The user is responsible for checking whether the connectors can also be used
in other areas of application.
Plug connectors with enclosure protection IP 67 and IP 68 are not suitable for use under water. When
used outdoors, the plug connectors must be protected separately against corrosion. For further
information on the IP protection classes, please refer to the "Technical Information" download centre.
Powered by TCPDF (www.tcpdf.org)
Date: 2021-02-23 - Page 4 of 4
