The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ISA Bus (AT bus) MCR60 Series Features 1. Standard Compliant with ISA bus (AT bus) standard 2. Connector Type The contact pitch is 2.54mm, and the connector has 98 contacts. 3. Board Mounting Type Straight through hole, right angle through hole types are available. 4. Prevents mis-insertion in the board Using the polarizing key prevents mis-insertion in the printed board. Product Specifications Current rating: 3A Operating Temperature Range: -30 to +85c (Note 1) Storage Temperature Range: -10 to +60c (Note 2) Voltage rating: 300V AC Operating Humidity Range: 40 to 80% Storage Humidity Range: 40 to 70% (Note 2) Rating Item Specification 1.Insulator Resistance Condition 500V DC 1000M ohms min. 2.Withstanding Voltage No flashover or insulation breakdown. 1000V AC/1 minute. 3.Contact Resistance 30m ohms max. 100mA 4.Vibration No electrical discontinuity of 10s or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5.Humidity(Steady state) Insulation resistance : 1000M ohms min. 96 hours at temperature of 40c and humidity of 90% to 95% 6.Temperature Cycle (-65c : 30 minutes15 to 35c: 5 minutes max. 125c : 30 minutes15 to 35c: 5 minutes max.) 5 cycles No damage, cracks, or parts looseness. 500 cycles 7.Durability (Mating/un-mating) Contact resistance : 30m ohms max. 8.Resistance to Soldering heat No deformation of components affecting performance. Manual soldering: 350c for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3. Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Material Parts Material Insulator PBT Contact Copper alloy Finish Remarks Black UL94V-0 Contact area Selective gold plated --------------- Lead area Tin plated --------------- Ordering Information MCR60 1 A - 98 D - 2.54 DS 2 3 4 5 6 1 Series Name : MCR60 5 Contact pitch : 2.54mm 2 Mold Type A: Without mounting hole 6 Contact type 3 Number of contacts : 98 DSA : Right bent and right angle type 4 Contact alignment : D : Double side DSB : Left bent and right angle type Blank: With Mounting hole : DS : Straight type A7 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products SeriesISA have been discontinued, or willbus) be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. MCR60 Bus (AT BPCB mounting pattern A8 Part Number CL No. RoHS MCR60A-98D-2.54DS(70) CL548-0112-5-70 YES 3.92( contact point) 7.62 (insertion depth in the board) Straight Through hole Type without mounting hole The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, contact your Hirose representative. MCR60orSeriesISA Bussales (AT bus) 3.92( contact point) 7.62 (insertion depth in the board) Left Bent and Right Angle Through hole Type with Mounting hole BPCB mounting pattern Part Number CL No. RoHS MCR60-98D-2.54DSB(70) CL548-0178-3-70 YES A9 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products SeriesISA have been discontinued, or willbus) be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. MCR60 Bus (AT BPCB mounting pattern A10 Part Number CL No. RoHS MCR60A-98D-2.54DSA(70) CL548-0148-2-70 YES 3.92( contact point) 7.62 (insertion depth in the board) Right Bent and Right Angle Through hole Type without Mounting hole The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, contact your Hirose representative. MCR60orSeriesISA Bussales (AT bus) BPCB Dimensions o 45 30 t 30 to 45 A11