MX88L295 MX88L295EC MX88L296EC Data Sheet Rev.1.0A -1- MX88L295 FEATURES OVERVIEW l BLOCK DIAGRAM MX88L295EC support triple ADC with 20 110 MHz Sampling Rate l MX88L296EC support triple ADC with 20 - REDIN CLAMP A/D GRNIN CLAMP A/D BLUIN CLAMP A/D 8 R1 8 R1 8 G1 8 G2 8 140 MHz Sampling Rate l MX88L295EC and MX88L296EC are Fully Pin Compatible l Integrated line locked PLL generates pixel clock from HSYNC l 8 B1 8 B2 8 Integrated 5-bit pixel clock phase adjustment for precise sample timing control l Integrated clamp with timing generator l Integrated Brightness & Contrast controls l Integrated precision voltage reference l Compatible with VGA thru SXGA RGB 2 HSYNC COAST CLAMP ADCLKINV EXTCLK 0.15V CONTROL Pin Compatible with AD9884A SOGIN l DCK HSOUT CLOCK SYNTHESIZER graphics signals l 8 SOG OUT SDA SCL A0 REF VREF A1 /PDN Serial port programming interface DESCRIPTION Most flat-panel monitors and projectors require a digital graphics input in order to accurately scale and display graphics. The huge installed base of computers with analog video graphics interfaces necessitates the use of a graphics digitizer to redigitize the analog RGB signal before further processing. l l l l l The MX88L295EC/MX88L296EC are fully integrated analog interfaces for digitizing high-resolution RGB graphics signals from PC's and workstations. With a sampling rate capability of up to 110/140 MHz, it can accurately support display resolutions up to 1280x1024 (SXGA) at 60/75Hz. The clamped input circuits provide sufficient bandwidth to accurately digitize each pixel. The MX88L295EC/MX88L296EC provide a high performance highly integrated solution to support the digitization process, including the ADC's, a voltage reference, a PLL to generate the pixel sampling clock from HSYNC, clamping circuits, and programmable offset and gain circuits to provide brightness and contrast controls. When the COAST signal is asserted, the PLL will maintain its output frequency when HSYNC pulses are absent, such as during the VSYNC period in some systems. A 32-step programmable phase adjustment control (0-360 deg) is provided for the pixel sampling clock to adjust for the difference between the HSYNC edge and RGB pixel edge timing. The MX88L295ECMX88L296EC can send output data through one 24-bit port at the pixel clock rate, or through two 24-bit ports at 1/2 the pixel clock rate. The 1/2 pixel clock rate data can be sent fully parallel or using a staggered clock to improve ground bounce or system EMI. -2-