Ordering information DC-DC Converters Power Module type CES CE 1 S 2 48 3 018 4 R MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT CES24033-25 82.5 3.3V 25A CES24050-16 80.0 5V 16A CES24120-6 72.0 12V 6A -30 5 -O 6 1Series name 2Single output 3Input voltage 24 :DC18 - 36V 48 :DC36 - 76V 4Output voltage 015:1.5V 018:1.8V 025:2.5V 033:3.3V 050:5V 060:6V 120:12V 150:15V 5Output current 6Optional S :SMD R :with Remote ON/OFF Positive logic control V :Ouput voltage setting t1% N :Auto restart from thermal protection CES24150-4 60.0 15V 4A SPECIFICATIONS INPUT OUTPUT MODEL VOLTAGE[V] *1 CURRENT[A] *1 EFFICIENCY[%] START-UP VOLTAGE[V] HYSTERESIS VOLTAGE[V] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] [mVrms] *2 RIPPLE [mVp-p] *2 *2 RIPPLE NOISE[mVp-p] TEMPERATURE REGULATION[mV] *3 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE *4 OUTPUT VOLTAGE SETTING OVERCURRENT PROTECTION PROTECTION OVERVOLTAGE PROTECTION CIRCUIT AND REMOTE SENSING OTHERS REMOTE ON/OFF CES24033-25 CES24050-16 CES24120-6 DC18 - 36 3.78typ 3.67typ 3.30typ 91typ 91typ 91typ DC16 - 18 DC1 min 5 12 3.3 16 6 25 t5max t5max t12max t5max t5max t12max 20max 20max 40max 80max 120max 60max 120max 150max 100max 100max 240max 66max 20max 40max 16max 200max (DCIN 24V, Io=100%) Fixed (TRM pin open), adjustable by external resistor -15% / +15% -20% / +20% -20% / +10% t1.6% Works over 105% of rating, low voltage protection (shut down) function is built-in. 125% - 135% 125% - 135% 117% - 127% Provided Provided (Negative logic L : ON, H : OFF) Standard type MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT CES48015-30 45.0 1.5V 30A CES48018-30 54.0 1.8V 30A CES48025-25 62.5 2.5V 25A CES48033-25 82.5 3.3V 25A CES24150-4 DC20 - 33 2.75typ 91typ DC18 - 20 15 4 t15max t15max 40max 120max 150max 300max 50max -20% / +5% High wattage type CES48050-16 80.0 5V 16A CES48120-6 72.0 12V 6A CES48150-4 60.0 15V 4A CES48033-30 99.0 3.3V 30A CES48050-20 100.0 5V 20A CES48060-17 102.0 6V 17A CES48015-30 CES48018-30 CES48025-25 CES48033-25 CES48050-16 CES48120-6 CES48150-4 CES48033-30 DC40 - 60 DC36 - 76 DC36 - 76 1.1typ 1.3typ 1.37typ 1.45typ 1.89typ 1.84typ 1.65typ 2.29typ 86typ 87typ 91typ 90typ 91typ 91typ 91typ 90typ DC36 - 40 DC32 - 36 DC32 - 36 DC2 min 1.5 1.8 2.5 3.3 5 12 3.3 15 30 30 25 25 16 6 30 4 t5max t5max t5max t5max t5max t12max t15max t5max t5max t5max t5max t5max t5max t12max t15max t5max 20max 20max 40max 20max 20max 25max 40max 20max 60max 60max 120max 60max 60max 80max 120max 60max 100max 100max 120max 150max 100max 100max 100max 150max 66max 66max 300max 66max 66max 100max 240max 66max 16max 16max 50max 16max 16max 16max 20max 40max 200max (DCIN 48V, Io=100%) Fixed (TRM pin open), adjustable by external resistor -20% / +10% -15% / +15% -20% / +10% -20% / +5% -15% / +15% t1.6% Works over 105% of rating, low voltage protection (shut down) function is built-in. 117% - 127% 125% - 135% 117% - 127% 125% - 135% Provided Provided (Negative logic L : ON, H : OFF) CES48050-20 CES48060-17 2.32typ 90typ 2.36typ 92typ 5 20 t5max t5max 25max 100max 150max 100max 20max 6 17 t5max t5max 25max 100max 150max 100max 20max SPECIFICATIONS INPUT CE/CQ OUTPUT MODEL VOLTAGE[V] *1 CURRENT[A] *1 EFFICIENCY[%] START-UP VOLTAGE[V] HYSTERESIS VOLTAGE[V] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] [mVrms] *2 RIPPLE [mVp-p] *2 *2 RIPPLE NOISE[mVp-p] TEMPERATURE REGULATION[mV] *3 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE OUTPUT VOLTAGE SETTING OVERCURRENT PROTECTION PROTECTION OVERVOLTAGE PROTECTION CIRCUIT AND REMOTE SENSING OTHERS REMOTE ON/OFF CE/CQ-2 -20% / +10% 117% - 127% CES GENERAL SPECIFICATIONS ISOLATION INPUT-OUTPUT OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE ENVIRONMENT VIBRATION IMPACT AGENCY APPROVALS SAFETY CASE SIZE/WEIGHT OTHERS COOLING METHOD At rated input(DC24V,DC48V) and rated load and 25C, 2m/s. Ripple and ripple noise is measured by using measuring board with ceramic capacitor 22mF. Refer to the Instruction Manual. Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Refer to the instruction manual for input voltage derating. External view 1. DIP 57.9 [2.28] Model 50.8 -VIN 8.5max [0.14] [0.33] 6-1.5 [0.09] 1 0.1 [0.6] [0.3] 15.24 15.24 [0.6] 3.68 0.25 2.2 [0.14] 1.7 [0.07] Recommended size for processing PCB (TOP VIEW) 50.8 [2.0] 2-2 [0.08] [0.06] VOUT Pin [0.14] 3.68 0.25 VIN/RC/TRM/S Pin Tolerance:0.5 [0.02] Weight:26g max Dimensions in mm, [ ]= inches 3.81 [0.15] 7.62 [0.3] 3.68 0.25 [0.9] [0.6] 15.24 RC 22.76 +VOUT +S TRM -S -VOUT +VIN 7.62 [2] Dimensions in mm, [ ]= inches Div.:0.5inch 1.5 0.1 [0.06] [0.04] 57.9 2. SMD(optionS) [2.28] 50.8 Adsorption point [0.33] Coplanarity within 0.15 [0.01] VIN/RC/TRM/S Pin 1.9 0.1 [0.07] VOUT Pin +0 2.4 -0.1 [0.09] 6-2.9 [0.11] Recommended size for processing PCB (TOP VIEW) 50.8 [2.0] 2-3.4 CE/CQ [0.13] 15.24 [0.6] 8.5max 3.81 [0.15] 7.62 [0.3] [0.9] [0.79] 20.0 [0.6] RC -VIN +VOUT +S TRM -S -VOUT 22.76 [0.35] +VIN [0.6] 9 15.24 [2] [0.96] 7.62 24.5 [0.3] Model 15.24 *1 *2 *3 *4 DC1,500V or AC1,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20 t15C) -40 to +85 C , 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max (Option S:Refer to the instruction Manual) 10 - 55Hz, 49.0m/s2 (5G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each along X, Y and Z axis UL60950-1, C-UL (CSA60950-1), EN60950-1 57.9X8.5 X22.76mm [2.28X0.33X0.9 inches] (WXHXD) / 26g max Convection / Forced air Dimensions in mm, [ ]= inches Div.:0.5inch CE/CQ-3